We propose and experimentally demonstrate a novel, to the best of our knowledge, correlated random bit generation (CRBG) scheme in virtue of the synchronization of two physical entropy sources that are composed of a continuous-wave laser, a phase modulator that is driven by the output of a local laser subject to constant-amplitude and random-phase (CARP) injection, as well as a dispersive component. It is experimentally indicated that wideband complex physical entropy sources with an effective bandwidth of 22 GHz can be achieved, and high-quality synchronization with a large cross-correlation coefficient (∼0.95) can be achieved by introducing symmetric CARP injections into the local lasers at Alice and Bob ends. Based on this, two distributed CRBSs with a bit rate over 3 Gb/s and satisfactory consistency are independently generated at Alice and Bob ends; the excellent randomness of CRBSs is verified using a test suite of the National Institute of Standards and Technology.
We propose and experimentally demonstrate a novel, to the best of our knowledge, correlated random bit generation (CRBG) scheme in virtue of the synchronization of two physical entropy sources that are composed of a continuous-wave laser, a phase modulator that is driven by the output of a local laser subject to constant-amplitude and random-phase (CARP) injection, as well as a dispersive component. It is experimentally indicated that wideband complex physical entropy sources with an effective bandwidth of 22 GHz can be achieved, and high-quality synchronization with a large cross-correlation coefficient (∼0.95) can be achieved by introducing symmetric CARP injections into the local lasers at Alice and Bob ends. Based on this, two distributed CRBSs with a bit rate over 3 Gb/s and satisfactory consistency are independently generated at Alice and Bob ends; the excellent randomness of CRBSs is verified using a test suite of the National Institute of Standards and Technology.
We propose and experimentally demonstrate a novel, to the best of our knowledge, private correlated random bit generation (CRBG) scheme based on commonly driven induced synchronization of two wideband physical entropy sources, which employs an open-loop distributed feedback laser followed by a hybrid electro-optic nonlinear transformation hardware module for effective bandwidth expansion and privacy enhancement. A Mach-Zehnder interferometer followed by an electro-optic self-feedback phase modulation loop as well as a dispersion element are constructed as a private hardware module to perform post-processing and nonlinear transformation of the synchronized signal. A record high rate of 5.2-Gb/s CRBG is successfully achieved between two synchronized wideband physical entropy sources with an enhanced entropy source rate and hardware key space. The demonstrated scheme may provide a new way for CRBG in future high speed secure communication systems.
With the widespread application of big data, the amount of data transmitted through optical networks has been increasing dramatically. Correlated random bit generation (CRBG) is one of the key technologies in secure communication systems to ensure security performance and transmission efficiency. We propose and demonstrate a CRBG scheme based on a Mach–Zehnder modulator (MZM) electro-optic feedback loop to improve the security and speed of communication systems. In this scheme, common-signal-induced synchronization is accomplished to generate wideband complex physical entropy sources, and a private hardware module is employed to perform post-processing and nonlinear transformation of the synchronized signal. The simulation results show that the effective bandwidth of the output chaotic signal is significantly increased to 27.76 GHz, and high-quality synchronization with a correlation coefficient of over 0.98 is reached. A high-rate CRBG of up to 5.3 Gb/s is successfully achieved between two synchronized wideband physical entropy sources, and the hardware key space is enhanced to ∼242, which greatly improves the privacy of physical entropy sources. The proposed scheme provides a promising approach for high-speed private CRBG, which is expected to be used in high-speed secure key distribution and optical communication systems.
Correlated random bit generation (CRBG) plays an important role in secure communication, particularly for secure key distribution. In this work, we propose and numerically demonstrate a scheme of CRBG based on multi-channel broadband entropy sources and parallel filtering. In this scheme, a chaotic optical frequency comb generator is employed to produce a chaotic frequency comb with multi-channel low-correlated wideband chaos. Based on the commonly driven induced synchronization between two closed-loop distributed feedback lasers and chaotic frequency comb generation, synchronized multi-channel wideband chaos is achieved. Then, parallel filtering is implemented by utilizing an arrayed-waveguide grating to divide the chaotic frequency comb into multi-channel sub-carrier chaos with different wavelengths. To reduce the correlation among adjacent channels and improve the chaos complexity, beating frequency processing with different delay times among adjacent chaotic sub-carriers is performed to get several different sets of chaotic output, among which an enhanced bandwidth over 20 GHz and low correlations are obtained. Moreover, the correlation between the chaotic output and the driving signal can be further suppressed, indicating that the security of the scheme is guaranteed. Multi-channel high-speed CRBG with a total generation rate of 16 Gb/s is successfully achieved at two legitimate users after transmission, with the randomness of multi-channel correlated bit generation verified using a test suite from the National Institute of Standards and Technology. The proposed scheme may provide a way for high-speed multi-channel parallel correlated random bits based on commercial components, which could potentially find applications in future secure optical communication systems.
We propose and experimentally demonstrate a physical-layer key distribution scheme using commonly-driven laser synchronization with random modulation of drive light. Two parameter-matched semiconductor lasers injected by a common complex drive light are used as entropy sources for legitimate users. Legitimate users generate their own random signal by randomly time-division multiplexing of two random sequences with a certain duration according to individual control codes, and then independently modulate the drive light. Laser synchronization is achieved during time slots when the modulation sequences of two users are identical, and thus provide highly correlated randomness for extracting random numbers as shared keys. Experimental results show that the random modulation of the drive light reduces the correlation between the drive light and laser outputs. In addition, laser synchronization is sensitive to the modulation delay and then the latter can be used as an additional hardware parameter. These mean that security is enhanced. In addition, the proposed method has a short laser synchronization recovery time of lower than 1.1 ns, meaning a high rate of key distribution. The upper limit of final key rate of 2.55 Gb/s with a criterion of bit error rate of 1.68 × 10 −3 is achieved in experiments. Our results provide a promising candidate for protecting the security of optical fiber communication.
We propose and experimentally demonstrate a wireless-channel key distribution scheme based on laser synchronization induced by a common wireless random signal. Two semiconductor lasers are synchronized under injection of the drive signal after electrical-optical conversion and emit irregular outputs that are used to generate shared keys. Our proof-of-concept experiment using a complex drive signal achieved a secure key generation rate of up to 150 Mbit/s with a bit error rate below 3.8 × 10−3. Numerical simulation results show that the proposed scheme has the potential to achieve a distribution distance of several hundred meters. It is believed that common-signal-induced laser synchronization paves the way for high-speed wireless physical-layer key distribution.
Random numbers have great application value in the fields of secure communications, which are commonly used as secret keys to encrypt the information. To guarantee that the information is absolutely secure in the current high-speed communication, the applied random keys should possess a generation speed not less than the encrypted data rate, according to one-time pad theory found by Shannon (Shannon C E 1949 Bell.Syst.Tech.J. 28 656) Pseudo-random numbers generated by algorithm may easily reach a fast speed, but a certain periodicity makes them difficult to meet the aforementioned demand of information security. Utilizing physical stochastic phenomena can provide reliable random numbers, called physical random number generators (RNGs). However, limited by the bandwidth of the conventional physical sources such as electronic noise, frequency jitter of oscillator and quantum randomness, the traditional physical RNG has a generation speed at a level of Mb/s typically. Therefore, real-time and ultrafast physical random number generation is urgently required from the view of absolute security for high-speed communication today. With the advent of wideband photonic entropy sources, in recent years lots of schemes for high-speed random number generation are proposed. Among them, chaotic laser has received great attention due to its ultra-wide bandwidth and large random fluctuation of intensity. The real-time speed of physical RNG based on chaotic laser is now limited under 5 Gb/s, although the reported RNG claims that an ultrafast speed of Tb/s is possible in theory. The main issues that restrict the real-time speed of RNG based on chaotic laser are from two aspects. The first aspect is electrical jitter bottleneck confronted by the electrical analog-to-digital converter (ADC). Specifically, most of the methods of extracting random numbers are first to convert the chaotic laser into an electrical signal by a photo-detector, then use an electrical ADC driven by radio frequency (RF) clock to sample and quantify the chaotic signal in electronic domain. Unfortunately, the response rate of ADC is below Gb/s restricted by the aperture jitter (several picoseconds) of RF clock in the sample and hold circuit. The second aspect comes from the complex post-processes, which are fundamental in current RNG techniques to realize a good randomness. The strict synchronization among post-processing components (e.g., XOR gates, memory buffers, high-order difference) is controlled by an RF clock. Similarly, it is also an insurmountable obstacle to achieve an accurate synchronization due to the electronic jitter of the RF clock. In this paper, we propose a method of ultrafast multi-bit physical RNG based on chaotic laser without any post-process. In this method, a train of optical pulses generated by a GHz mode-locked laser with low temporal jitter at a level of fs is used as an optical sampling clock. The chaotic laser is sampled in the optical domain through a low switching energy and high-linearity terahertz optical asymmetric demultiplexer (TOAD) sampler, which is a fiber loop with an asymmetrical nonlinear semiconductor optical amplifier. Then, the peak amplitude of each sampled chaotic pulse is digitized by a multi-bit comparator (i.e., a multi-bit ADC without sample and hold circuit) and converted into random numbers directly. Specifically, a proof-of-principle experiment is executed to demonstrate the aforementioned proposed method. In this experiment, an optical feedback chaotic laser is used, which has a bandwidth of 6 GHz. Through setting a sampling rate to be 5 GSa/s and selecting 4 LSBs outputs of the 8-bit comparator, 20 Gb/s (=5 GSa/s4 LSBs) physical random number sequences are obtained. Considering the ultrafast response rate of TOAD sampler, the speed of random numbers generated by this method has the potential to reach several hundreds of Gb/s as long as the used chaotic laser has a sufficient bandwidth.