Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Infrared, Millimeter-Wave, and Terahertz Technologies

Analysis of RF-noise contribution in THz superconducting SIS mixers

Honghu Li, Wei Tao Lv, Liu Dong, Bo Fan, Ming Yao, Boliang Liu, Jing Li, Sheng‐Cai Shi

Published Nov 18, 2019• 1 citation
Publisher

Abstract

Superconductor-insulator-superconductor (SIS) mixers, with nearly quantum-limited sensitivity, have been playing an important role in Terahertz astronomy. For practical THz SIS receivers, however, the measured noise temperatures are sometimes higher than the expected value. The extra noise is mainly due to considerable RF noise contribution from the receiver components such as beam splitter, Dewar window, and infrared filter. In this paper, we mainly present the simulation and measurement results of the three components with different materials and thicknesses. Their noise contributions are also analyzed.

DOI
10.1117/12.2537293

Related papers

Study of the Input RF noise of a THz superconductor-insulator-superconductor receiver

Ming Yao, Dong Liu, Jie Hu +2 more

The receiver noise temperature of THz superconductor-insulator-superconductor (SIS) receivers is composed of several contributions, in which the input RF noise is usually not negligible. In this paper, we investigate the input RF noise (Trf) of a waveguide superconducting niobium nitride (NbN) SIS receiver operating at 0.5THz. In particular, the input RF noise is measured for two respective cases of a small beam aperture surrounded by an aluminum plate and a blackbody, which is located just in front of the 0.5THz NbN SIS receiver. Detailed measurement results will be presented.

Asia-Pacific Microwave Conference (APMC)•Dec 1, 2015•0 citations

Low-noise THz-range Nb based SIS Receivers for Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +4 more

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 8, 2020•7 citations

THz Range Low-Noise SIS Receivers for Space and Ground-Based Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +5 more

We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.

Applied Sciences•Oct 28, 2021•36 citations

Superconducting Sub-THz Receivers for Space and Ground-Based Radio Astronomy

V. P. Koshelets, Kirill I. Rudakov, Andrey V. Khudchenko +5 more

Abstract The developments in the field of low-noise receiving systems in the sub-THz range, performed at the Kotelnikov Institute of Radio Engineering of the Russian Academy of Sciences in recent years and aimed at the creation of receivers with quantum sensitivity for space and ground-based radio telescopes are presented. Superconductor–insulator–superconductor (SIS) mixers based on high-quality tunnel junctions are key elements of the most sensitive sub-THz heterodyne receivers. The article presents the results of the development of SIS receivers in the 211–275 GHz and 800–950 GHz ranges with a noise temperature in the double-sideband (DSB) mode of about 20 K and 220 K, respectively. These achievements will be used to develop receiving systems for APEX and LLMA ground-based telescopes, as well as for the Millimetron space mission.

Bulletin of the Lebedev Physics Institute•Sep 1, 2021•4 citations

Low-noise 0.8-0.96- and 0.96-1.12-THz superconductor-insulator-superconductor mixers for the herschel space observatory

Brian D. Jackson, Gert J. de Lange, T. Zijlstra +4 more

Heterodyne mixers incorporating Nb SIS junctions and NbTiN-SiO/sub 2/-Al microstrip tuning circuits offer the lowest reported receiver noise temperatures to date in the 0.8-0.96- and 0.96-1.12-THz frequency bands. In particular, improvements in the quality of the NbTiN ground plane of the SIS devices' on-chip microstrip tuning circuits have yielded significant improvements in the sensitivity of the 0.96-1.12-THz mixers relative to previously presented results. Additionally, an optimized RF design incorporating a reduced-height waveguide and suspended stripline RF choke filter offers significantly larger operating bandwidths than were obtained with mixers that incorporated full-height waveguides near 1 THz. Finally, the impact of junction current density and quality on the performance of the 0.8-0.96-THz mixers is discussed and compared with measured mixer sensitivities, as are the relative sensitivities of the 0.8-0.96- and 0.96-1.12-THz mixers.

IEEE Transactions on Microwave Theory and Techniques•Feb 1, 2006•59 citations

Terahertz high-sensitivity superconducting detectors

Shi Sheng-Cai, Jing Li, Wen Zhang +1 more

The terahertz regime, as a last radio window, remains to be fully explored, and astronomical and atmospheric observations in this regime are scientifically important. Like other frequency regimes, developing high-sensitivity detectors (coherent and incoherent) is of particular significance for both ground-based and space-borne facilities. As the coherent detector of choice below 1.4 THz, superconductor-insulator-superconductor (SIS) heterodyne mixers have achieved as high a sensitivity as five times the quantum limit around 1.4 THz. It is, however, still a challenge to developing SIS mixers at frequencies beyond 1.4 THz with considerable transmission loss in superconducting circuits due to the Cooper-pair breaking by energetic photons and increased many difficulties in designing and fabricating. So far, superconducting hot electron bolometer (HEB) mixers have been the most sensitive heterodyne detectors at frequencies above 1.5 THz, and successfully used to detect molecular spectral lines up to 2.5 THz from ground-based and space telescopes. Although spiral-antenna coupled NbN HEB mixers show a good sensitivity in the whole THz frequency range, the directly measured spectral response with Fourier transform spectrometer falls quickly as frequency increases, especially above 3 THz. The terahertz band is also of particular importance to observe astronomical objects such as cosmic microwave background, early distant objects, cold objects and dusty objects. Aiming at such objects, we develop a terahertz imaging array system by combining advanced superconducting detectors such as transition edge sensor (TES) and microwave kinetic inductance detectors (MKIDs), thus the system has a frequency band centred at 350 m, an operational temperature of 0.3 K, and a sensitivity reaching background limit performance for ground-based applications. In addition, it is expected to have some breakthroughs in ultra-sensitive superconducting TES and MKID, low noise multi-channel readout and multiplexing, efficient terahertz-wave coupling technology, and large-scale array system integration. The developed terahertz imaging array system will serve as the next-generation instrument of Dome A 5 m terahertz telescope, conducting a 350 m-band legacy survey for studying the planets, stars, galaxies and cosmology. Besides the application in astronomy, the developed terahertz imaging array system can also be applied to some areas requiring rapid detection such as security, deep space exploration, and biomedical imaging. In this paper, we mainly introduce the superconducting detectors developed at Purple Mountain Observatory and those for international collaborative projects.

Acta Physica Sinica•Jan 1, 2015•8 citations
Superconductor-insulator-superconductor (SIS) mixers, with nearly quantum-limited sensitivity, have been playing an important role in Terahertz astronomy. For practical THz SIS receivers, however, the measured noise temperatures are sometimes higher than the expected value. The extra noise is mainly due to considerable RF noise contribution from the receiver components such as beam splitter, Dewar window, and infrared filter. In this paper, we mainly present the simulation and measurement results of the three components with different materials and thicknesses. Their noise contributions are also analyzed.
The receiver noise temperature of THz superconductor-insulator-superconductor (SIS) receivers is composed of several contributions, in which the input RF noise is usually not negligible. In this paper, we investigate the input RF noise (Trf) of a waveguide superconducting niobium nitride (NbN) SIS receiver operating at 0.5THz. In particular, the input RF noise is measured for two respective cases of a small beam aperture surrounded by an aluminum plate and a blackbody, which is located just in front of the 0.5THz NbN SIS receiver. Detailed measurement results will be presented.
This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.
We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.
Abstract The developments in the field of low-noise receiving systems in the sub-THz range, performed at the Kotelnikov Institute of Radio Engineering of the Russian Academy of Sciences in recent years and aimed at the creation of receivers with quantum sensitivity for space and ground-based radio telescopes are presented. Superconductor–insulator–superconductor (SIS) mixers based on high-quality tunnel junctions are key elements of the most sensitive sub-THz heterodyne receivers. The article presents the results of the development of SIS receivers in the 211–275 GHz and 800–950 GHz ranges with a noise temperature in the double-sideband (DSB) mode of about 20 K and 220 K, respectively. These achievements will be used to develop receiving systems for APEX and LLMA ground-based telescopes, as well as for the Millimetron space mission.
Heterodyne mixers incorporating Nb SIS junctions and NbTiN-SiO/sub 2/-Al microstrip tuning circuits offer the lowest reported receiver noise temperatures to date in the 0.8-0.96- and 0.96-1.12-THz frequency bands. In particular, improvements in the quality of the NbTiN ground plane of the SIS devices' on-chip microstrip tuning circuits have yielded significant improvements in the sensitivity of the 0.96-1.12-THz mixers relative to previously presented results. Additionally, an optimized RF design incorporating a reduced-height waveguide and suspended stripline RF choke filter offers significantly larger operating bandwidths than were obtained with mixers that incorporated full-height waveguides near 1 THz. Finally, the impact of junction current density and quality on the performance of the 0.8-0.96-THz mixers is discussed and compared with measured mixer sensitivities, as are the relative sensitivities of the 0.8-0.96- and 0.96-1.12-THz mixers.
The terahertz regime, as a last radio window, remains to be fully explored, and astronomical and atmospheric observations in this regime are scientifically important. Like other frequency regimes, developing high-sensitivity detectors (coherent and incoherent) is of particular significance for both ground-based and space-borne facilities. As the coherent detector of choice below 1.4 THz, superconductor-insulator-superconductor (SIS) heterodyne mixers have achieved as high a sensitivity as five times the quantum limit around 1.4 THz. It is, however, still a challenge to developing SIS mixers at frequencies beyond 1.4 THz with considerable transmission loss in superconducting circuits due to the Cooper-pair breaking by energetic photons and increased many difficulties in designing and fabricating. So far, superconducting hot electron bolometer (HEB) mixers have been the most sensitive heterodyne detectors at frequencies above 1.5 THz, and successfully used to detect molecular spectral lines up to 2.5 THz from ground-based and space telescopes. Although spiral-antenna coupled NbN HEB mixers show a good sensitivity in the whole THz frequency range, the directly measured spectral response with Fourier transform spectrometer falls quickly as frequency increases, especially above 3 THz. The terahertz band is also of particular importance to observe astronomical objects such as cosmic microwave background, early distant objects, cold objects and dusty objects. Aiming at such objects, we develop a terahertz imaging array system by combining advanced superconducting detectors such as transition edge sensor (TES) and microwave kinetic inductance detectors (MKIDs), thus the system has a frequency band centred at 350 m, an operational temperature of 0.3 K, and a sensitivity reaching background limit performance for ground-based applications. In addition, it is expected to have some breakthroughs in ultra-sensitive superconducting TES and MKID, low noise multi-channel readout and multiplexing, efficient terahertz-wave coupling technology, and large-scale array system integration. The developed terahertz imaging array system will serve as the next-generation instrument of Dome A 5 m terahertz telescope, conducting a 350 m-band legacy survey for studying the planets, stars, galaxies and cosmology. Besides the application in astronomy, the developed terahertz imaging array system can also be applied to some areas requiring rapid detection such as security, deep space exploration, and biomedical imaging. In this paper, we mainly introduce the superconducting detectors developed at Purple Mountain Observatory and those for international collaborative projects.