Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the Lebedev Physics Institute

Superconducting Sub-THz Receivers for Space and Ground-Based Radio Astronomy

V. P. Koshelets, Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko, Ronald Hesper, Jacques R. D. Lépine, Sheng‐Cai Shi, Andrey M. Baryshev

Published Sep 1, 2021• 4 citations
Publisher

Abstract

Abstract The developments in the field of low-noise receiving systems in the sub-THz range, performed at the Kotelnikov Institute of Radio Engineering of the Russian Academy of Sciences in recent years and aimed at the creation of receivers with quantum sensitivity for space and ground-based radio telescopes are presented. Superconductor–insulator–superconductor (SIS) mixers based on high-quality tunnel junctions are key elements of the most sensitive sub-THz heterodyne receivers. The article presents the results of the development of SIS receivers in the 211–275 GHz and 800–950 GHz ranges with a noise temperature in the double-sideband (DSB) mode of about 20 K and 220 K, respectively. These achievements will be used to develop receiving systems for APEX and LLMA ground-based telescopes, as well as for the Millimetron space mission.

DOI
10.3103/s1068335621090062

Related papers

THz Range Low-Noise SIS Receivers for Space and Ground-Based Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +5 more

We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.

Applied Sciences•Oct 28, 2021•36 citations

Low-noise THz-range Nb based SIS Receivers for Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +4 more

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 8, 2020•7 citations

Superconducting terahertz receivers for space-borne and balloon-borne radio telescopes

V. P. Koshelets, Michael A. Tarasov

A superconducting heterodyne receiver based on superconductor–insulator–superconductor (SIS) junctions and a bolometric receiver based on superconductor–insulator–normal metal (SIN) tunnel junctions developed at the Kotelnikov Institute is described. The noise temperature and noise equivalent power of such a receiver fit the requirements for the TELIS, BOOMERANG, OLIMPO, and LSPE aerostatborne radio telescopes, and the space-based SPICA and MILLIMETRON projects, among others. Applications of such receivers for medical diagnostics and remote control are described.

Bulletin of the Russian Academy of Sciences Physics•Apr 1, 2016•1 citation

Development of superconducting THz receivers for radio astronomy

Yoshinori Uzawa, Yasunori Fujii, M. Kroug +8 more

A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2016•2 citations

Superconducting Terahertz Receivers for Space and Ground-based Radio Astronomy

Jacques R. D. Lépine, Huabing Wang, Coenrad Johann Fourie +6 more

The main task of the RFBR_BRICS project “Superconducting terahertz receivers for space and ground radio astronomy” is the development of terahertz technologies and the creation of superconductor-insulator- superconductor (SIS) receivers with quantum sensitivity for novel radio telescopes, including ultra-long baseline radio interferometers. This research program brings together scientific groups from four BRICS countries (Brazil, Russia, China and South Africa), which have a high international reputation and successful experience in the development of ultrasensitive receivers. The report discusses the working plan and the first results of the project; in particular development of the SIS-receivers for Russian space program “Millimetron”

IEEE All-Russian Microwave Conference (RMC)•Nov 25, 2020•1 citation

SIS mixers for low noise millimetre-wave heterodyne receivers

Steven R. Davies, C. T. Cunningham, Leslie T. Little

The development of ultra-low-noise receivers at frequencies of >200 GHz is primarily driven by astronomical applications. The most sensitive millimeter-wave receivers that have presently been constructed make use of the strong mixing afforded by superconductor-insulator-superconductor (SIS) tunnel junctions. In a collaborative project between UKC and RAL, a 230 GHz laboratory receiver has been built using a lead alloy SIS junction as the mixing element, mounted in 4:1 reduced-height waveguide, terminated at one end with a circular cross-section, adjustable backshort. Best results indicate a double-sideband receiver noise temperature of T/sub R/(DSB) approximately=120 K, which represents state-of-the-art performance at this frequency. Initial difficulties in achieving good mixing performance prompted an investigation into the importance of the 'quality' of mixer block backshort tuning elements. An analysis of the mixer equivalent circuit is presented which allows for loss in a non-ideal mixer block, and 3-port mixer model calculations are discussed which incorporate this analysis into the Tucker quantum theory of mixing.

•Mar 22, 1988•0 citations
Abstract The developments in the field of low-noise receiving systems in the sub-THz range, performed at the Kotelnikov Institute of Radio Engineering of the Russian Academy of Sciences in recent years and aimed at the creation of receivers with quantum sensitivity for space and ground-based radio telescopes are presented. Superconductor–insulator–superconductor (SIS) mixers based on high-quality tunnel junctions are key elements of the most sensitive sub-THz heterodyne receivers. The article presents the results of the development of SIS receivers in the 211–275 GHz and 800–950 GHz ranges with a noise temperature in the double-sideband (DSB) mode of about 20 K and 220 K, respectively. These achievements will be used to develop receiving systems for APEX and LLMA ground-based telescopes, as well as for the Millimetron space mission.
We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.
This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.
A superconducting heterodyne receiver based on superconductor–insulator–superconductor (SIS) junctions and a bolometric receiver based on superconductor–insulator–normal metal (SIN) tunnel junctions developed at the Kotelnikov Institute is described. The noise temperature and noise equivalent power of such a receiver fit the requirements for the TELIS, BOOMERANG, OLIMPO, and LSPE aerostatborne radio telescopes, and the space-based SPICA and MILLIMETRON projects, among others. Applications of such receivers for medical diagnostics and remote control are described.
A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.
The main task of the RFBR_BRICS project “Superconducting terahertz receivers for space and ground radio astronomy” is the development of terahertz technologies and the creation of superconductor-insulator- superconductor (SIS) receivers with quantum sensitivity for novel radio telescopes, including ultra-long baseline radio interferometers. This research program brings together scientific groups from four BRICS countries (Brazil, Russia, China and South Africa), which have a high international reputation and successful experience in the development of ultrasensitive receivers. The report discusses the working plan and the first results of the project; in particular development of the SIS-receivers for Russian space program “Millimetron”
The development of ultra-low-noise receivers at frequencies of >200 GHz is primarily driven by astronomical applications. The most sensitive millimeter-wave receivers that have presently been constructed make use of the strong mixing afforded by superconductor-insulator-superconductor (SIS) tunnel junctions. In a collaborative project between UKC and RAL, a 230 GHz laboratory receiver has been built using a lead alloy SIS junction as the mixing element, mounted in 4:1 reduced-height waveguide, terminated at one end with a circular cross-section, adjustable backshort. Best results indicate a double-sideband receiver noise temperature of T/sub R/(DSB) approximately=120 K, which represents state-of-the-art performance at this frequency. Initial difficulties in achieving good mixing performance prompted an investigation into the importance of the 'quality' of mixer block backshort tuning elements. An analysis of the mixer equivalent circuit is presented which allows for loss in a non-ideal mixer block, and 3-port mixer model calculations are discussed which incorporate this analysis into the Tucker quantum theory of mixing.