Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Electro-Optical Remote Sensing

Detection and jamming resistance of quantum ghost imaging for remote sensing

Dominik Walter, Carsten Pitsch, Gabriela Paunescu, Peter Lutzmann

Published Oct 10, 2019• 4 citations
Publisher

Abstract

We investigate a novel quantum based active imaging system for remote sensing that has inherent resistance to hostile detection and jamming. It is an advanced quantum ghost imaging setup, which does not rely on preliminary information on the distances of objects. The photon source of the setup will be suited for standoff detection with illumination of remote objects in the infrared, while retrieving the spatial information in the visible regime with matured silicon technology. Due to inherent randomness of illumination patterns in space and time only the observer is able to distinguish illumination photons from ambient background noise by position- and time-correlation of entangled partner photons.

DOI
10.1117/12.2532379

Related papers

Quantum remote sensing

Dominik Walter, Carsten Pitsch

We present an advanced quantum ghost imaging (QGI) setup that enables low-noise, three-dimensional imaging and ranging of distant objects. A key technical innovation is asynchronous detection by independent single photon detectors, which significantly simplifies existing setups and allows imaging at arbitrary distances. Recent experimental results demonstrate low-noise imaging and efficient object ranging. An important quantum advantage with regard to secure active sensing is indistinguishability from background noise for external parties.

SPIE Quantum Technologies for Defence and Security•Nov 15, 2024•1 citation

Quantum Ghost Imaging for Remote Sensing

Dominik Walter, Carsten Pitsch, Helge Bürsing

An advanced setup for quantum ghost imaging that features asynchronous detection enables low-noise 3D imaging of distant objects. Recent experimental results show the potential of the setup to outperform classical systems in many aspects.

Optica Sensing Congress•Jan 1, 2023•0 citations

Ghost Imaging with Atoms and Photons for Remote Sensing

K. G. H. Baldwin, R. I. Khakimov, B. M. Henson +4 more

Ghost imaging with correlated photon pairs has been applied to remote sensing without the spatially detected photons interacting with the object: here we demonstrate for the first time ghost imaging using correlated atom pairs.

OSA Light, Energy and the Environment Congress•Jan 1, 2017•3 citations

Quantum ghost imaging

Morris, Peter A.

The process of image recording is arguably one of the most prevalent technology in modern society and continues to inspire vast swathes of research due to its widespread applications spanning military, medical and consumer spheres. The danger present in a field so broad is that separate niches of research can become isolated with critical advancements struggling to traverse the gulfs between. Unifying the field is the omnipresent drive to acquire an ever increasing quality of images at the lowest possible cost, a goal which warrants continual fundamental research. Quantum entanglement exhibits many intriguing characteristics which make it a suitable tool for such fundamental investigations. The process of spontaneous parametric down- conversion has offered a yet unbeaten strength of photon correlations with the quantum nature of their production providing a reliable and controllable source of single-photons. Arising from these attributes is the technique known as ghost imaging. Though now known to be classically possible, the strength of entanglement generated correlations is yet to be surpassed. This thesis implemented this technique in tandem with the cutting edge detector technology in order to probe the fundamentals of image formation. This form of imaging allowed us to subject an object to a known number of photons whilst acquiring structural information from spatially separate, correlated photons which never interact with the object. The strength of the produced correlations allow us to acquire low background, high resolution images with far less light than traditional techniques and affords many novel benefits. The possibility of incorporating this technique with pre-existent regimes allowed me to draw from advancements made across the landscape of imaging research. Although referred to as “quantum ghost imaging” throughout this work, it should be noted that the intrinsic quantum nature of the correlations was not directly relied upon but provided an ideal source of strongly correlated photons. In order to determine the limits of a traditional imaging system this thesis first sought to answer the question: “can an image of an object be reconstructed from fewer photons than ii pixels in the image?” In chapter 3 I approached this from the perspective of compression, which minimises redundant information within a signal. This lead to the development of an imaging regime capable of imaging with far fewer photons than pixels in the image. By employing assumptions about the sparsity of natural images I was able to reconstruct an image of a biological sample containing an average of less than one photon per image pixel. Having reduced the number of photons necessary to form an image I then considered alternative methods for reducing the optical energy impinging on a sample. I sought to answer the question: “can non-degenerate ghost imaging reduce the optical energy impinged upon an object during imaging”. The photons produced in SPDC need not be of similar wavelengths, however may be chosen far from degeneracy, i.e. non-degenerate. In Chapter 4 I presented a ghost imaging system which illuminated the object with infrared light whilst recording the structural information via entangled visible photons. This allowed for objects opaque to visible light to be imaged in high quality without the need for a spatially resolving infrared detector, the state of the art of which lags behind their silicon based visible counterparts. I presented the systems capabilities by imaging objects which were etched into a gold substrate layered on to silicon, both of which are opaque to visible light. Not only did a reduction in energy deposition arise from the lower energy probe wavelength but applying the reconstruction techniques from the previous chapter brought that down to as low as ≈16 nJcm−2s−1. Seeking to expand the repertoire of applications, the low-light capabilities of my ghost imaging were applied to the technique of phase-contrast microscopy in chapter 5. Typically applied to translucent objects, phase-contrast imaging transfers phase information, i.e. the refractive index changed within the object, into an intensity distribution through the use of a phase-filter. In many of these applications the objects tend to be biological in nature, where high optical exposure can result in bleaching or damage. By applying the phase-filter non- locally, i.e. to the photons correlated to those probing the object, I acquired edge-enhanced images of a phase object whilst illuminating with significantly fewer photons than standard phase-contrast techniques. Having displayed the broad applicability of our low-light ghost imaging system, I then sought to determine the optical resolution in chapter 6. The resolution limits of ghost imaging are not clear at first glance owing to the resolutions dependence upon the strength of spatial correlations. As the length over which the spatial correlations are produced can be brought below the standard diffraction limit, it would seem the resolution of the system could be brought similarly low. To clarify this I artificially restricted the number of spatial modes in each of the correlated beams to uncover the physically realisable resolution. I show that although the resolution of a ghost imaging system to be fundamentally determined by the strength of the correlations, this can never be reached due to the inherent limitations of the intervening imaging system.

•Jan 1, 2018•0 citations

Quantum Ghost Imaging of Remote Targets With Novel SPAD Technology

Alessia Suprano, Massimiliano Proietti, Francesco Poggiali +9 more

Low-light-level imaging in the infrared regime could find applications in areas ranging from technological to biological. Still, its development is limited by the inefficiency of silicon-based detectors in this regime. Quantum Ghost Imaging (QGI) can address this limitation by allowing the separation of illumination and imaging [1]. This is accomplished by generating non-degenerate correlated photon pairs, whose infrared photon probes the object and is detected by an InGaAs bucket detector, while the spatial distribution of the visible one is collected by a single-photon sensitive silicon camera. Traditional QGI setups evaluate photon correlations through “heralding”, by triggering the camera upon idler detection and thus require an image-preserving delay-line, which limits their use for remote sensing [1]. In asynchronous QGI (aQGI) cameras are replaced with SPAD arrays [2] able to record photon timestamp with picoseconds precision. By identifying pairs through timestamps comparison, the mentioned limitations are resolved [3], enabling applications with reflective or diffusive objects where the timestamp delay depends on the object's position. In this work, we propose and demonstrate an experimental QGI setup for remote sensing in reflection configuration (Fig. 1). Collinear non-degenerate pairs of single-photons at 550 nm and 1550 nm are generated by pumping a 2 mm-long type-0 ppKTP crystal with a 405 nm laser. To enable imaging of objects at varying distances, we implemented a momentum-correlation-based setup. Infrared photons interacting with the object were collected by commercially available InGaAs SPAD detectors, while the visible photons were directly captured using a prototype silicon SPAD array developed by Politecnico di Milano [4]. It is based on a 32×32 SPAD, with in-pixel TDCs, and on-chip microlenses are employed to reach a fill factor of 78%. The time resolution is adjustable down to 250 ps, with 1 μs Full Scale Range (FSR). The measurement duty cycle (i.e. the ration of the TDC FSR and the frame time) can be increased with a multi-gate acquisition scheme. To validate the efficiency of our setup, we tested it using a proof-of-principle object, as shown in Fig. 1b. The reconstructed images, captured with the object placed at 30 cm intervals in an acquisition time of only 30 s, are shown in Fig. 1c. In summary, the shown results confirm the potential of the proposed setup for remote sensing applications, particularly for reflective or diffusive objects. Moreover, the proposed approach could offers the possibility of significantly reduce acquisition times compared to standard QGI setups.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations

Remote quantum ghost imaging

Carsten Pitsch, Dominik Walter, Helge Bürsing +1 more

Quantum Ghost Imaging (QGI) is a scheme using entangled pairs of photons (signal and idler) in order to perform imaging with both single photons and with only a single-element detector in the spectrum of interest. It utilises the temporal coincidence of the photons to identify associated pairs, while their spatial correlation allows to obtain image information from of the idler photon from the measurement of the signal photon. It is especially useful when using nondegenerate photon pairs, allowing to keep the signal photon in the silicon detection window, while the interacting wavelength can be freely chosen.However, current schemes are limited, as they rely on time-gating and heralding. Recent advances in single photon avalanche diodes (SPADs) allow the design of new single photon cameras, which can be outfitted with dedicated in-pixel timing circuitry. This allows to register single photons in both time and space. These detectors allowed us to design a new scheme for QGI, in which the coincidence is evaluated after the measurement. It also allows us to perform depth-resolved 3D imaging based on the time-of-flight of photons, first results of which are presented here.

Optical and Quantum Sensing and Precision Metrology II•Mar 13, 2024•1 citation
We investigate a novel quantum based active imaging system for remote sensing that has inherent resistance to hostile detection and jamming. It is an advanced quantum ghost imaging setup, which does not rely on preliminary information on the distances of objects. The photon source of the setup will be suited for standoff detection with illumination of remote objects in the infrared, while retrieving the spatial information in the visible regime with matured silicon technology. Due to inherent randomness of illumination patterns in space and time only the observer is able to distinguish illumination photons from ambient background noise by position- and time-correlation of entangled partner photons.
We present an advanced quantum ghost imaging (QGI) setup that enables low-noise, three-dimensional imaging and ranging of distant objects. A key technical innovation is asynchronous detection by independent single photon detectors, which significantly simplifies existing setups and allows imaging at arbitrary distances. Recent experimental results demonstrate low-noise imaging and efficient object ranging. An important quantum advantage with regard to secure active sensing is indistinguishability from background noise for external parties.
The process of image recording is arguably one of the most prevalent technology in modern society and continues to inspire vast swathes of research due to its widespread applications spanning military, medical and consumer spheres. The danger present in a field so broad is that separate niches of research can become isolated with critical advancements struggling to traverse the gulfs between. Unifying the field is the omnipresent drive to acquire an ever increasing quality of images at the lowest possible cost, a goal which warrants continual fundamental research. Quantum entanglement exhibits many intriguing characteristics which make it a suitable tool for such fundamental investigations. The process of spontaneous parametric down- conversion has offered a yet unbeaten strength of photon correlations with the quantum nature of their production providing a reliable and controllable source of single-photons. Arising from these attributes is the technique known as ghost imaging. Though now known to be classically possible, the strength of entanglement generated correlations is yet to be surpassed. This thesis implemented this technique in tandem with the cutting edge detector technology in order to probe the fundamentals of image formation. This form of imaging allowed us to subject an object to a known number of photons whilst acquiring structural information from spatially separate, correlated photons which never interact with the object. The strength of the produced correlations allow us to acquire low background, high resolution images with far less light than traditional techniques and affords many novel benefits. The possibility of incorporating this technique with pre-existent regimes allowed me to draw from advancements made across the landscape of imaging research. Although referred to as “quantum ghost imaging” throughout this work, it should be noted that the intrinsic quantum nature of the correlations was not directly relied upon but provided an ideal source of strongly correlated photons. In order to determine the limits of a traditional imaging system this thesis first sought to answer the question: “can an image of an object be reconstructed from fewer photons than ii pixels in the image?” In chapter 3 I approached this from the perspective of compression, which minimises redundant information within a signal. This lead to the development of an imaging regime capable of imaging with far fewer photons than pixels in the image. By employing assumptions about the sparsity of natural images I was able to reconstruct an image of a biological sample containing an average of less than one photon per image pixel. Having reduced the number of photons necessary to form an image I then considered alternative methods for reducing the optical energy impinging on a sample. I sought to answer the question: “can non-degenerate ghost imaging reduce the optical energy impinged upon an object during imaging”. The photons produced in SPDC need not be of similar wavelengths, however may be chosen far from degeneracy, i.e. non-degenerate. In Chapter 4 I presented a ghost imaging system which illuminated the object with infrared light whilst recording the structural information via entangled visible photons. This allowed for objects opaque to visible light to be imaged in high quality without the need for a spatially resolving infrared detector, the state of the art of which lags behind their silicon based visible counterparts. I presented the systems capabilities by imaging objects which were etched into a gold substrate layered on to silicon, both of which are opaque to visible light. Not only did a reduction in energy deposition arise from the lower energy probe wavelength but applying the reconstruction techniques from the previous chapter brought that down to as low as ≈16 nJcm−2s−1. Seeking to expand the repertoire of applications, the low-light capabilities of my ghost imaging were applied to the technique of phase-contrast microscopy in chapter 5. Typically applied to translucent objects, phase-contrast imaging transfers phase information, i.e. the refractive index changed within the object, into an intensity distribution through the use of a phase-filter. In many of these applications the objects tend to be biological in nature, where high optical exposure can result in bleaching or damage. By applying the phase-filter non- locally, i.e. to the photons correlated to those probing the object, I acquired edge-enhanced images of a phase object whilst illuminating with significantly fewer photons than standard phase-contrast techniques. Having displayed the broad applicability of our low-light ghost imaging system, I then sought to determine the optical resolution in chapter 6. The resolution limits of ghost imaging are not clear at first glance owing to the resolutions dependence upon the strength of spatial correlations. As the length over which the spatial correlations are produced can be brought below the standard diffraction limit, it would seem the resolution of the system could be brought similarly low. To clarify this I artificially restricted the number of spatial modes in each of the correlated beams to uncover the physically realisable resolution. I show that although the resolution of a ghost imaging system to be fundamentally determined by the strength of the correlations, this can never be reached due to the inherent limitations of the intervening imaging system.
Low-light-level imaging in the infrared regime could find applications in areas ranging from technological to biological. Still, its development is limited by the inefficiency of silicon-based detectors in this regime. Quantum Ghost Imaging (QGI) can address this limitation by allowing the separation of illumination and imaging [1]. This is accomplished by generating non-degenerate correlated photon pairs, whose infrared photon probes the object and is detected by an InGaAs bucket detector, while the spatial distribution of the visible one is collected by a single-photon sensitive silicon camera. Traditional QGI setups evaluate photon correlations through “heralding”, by triggering the camera upon idler detection and thus require an image-preserving delay-line, which limits their use for remote sensing [1]. In asynchronous QGI (aQGI) cameras are replaced with SPAD arrays [2] able to record photon timestamp with picoseconds precision. By identifying pairs through timestamps comparison, the mentioned limitations are resolved [3], enabling applications with reflective or diffusive objects where the timestamp delay depends on the object's position. In this work, we propose and demonstrate an experimental QGI setup for remote sensing in reflection configuration (Fig. 1). Collinear non-degenerate pairs of single-photons at 550 nm and 1550 nm are generated by pumping a 2 mm-long type-0 ppKTP crystal with a 405 nm laser. To enable imaging of objects at varying distances, we implemented a momentum-correlation-based setup. Infrared photons interacting with the object were collected by commercially available InGaAs SPAD detectors, while the visible photons were directly captured using a prototype silicon SPAD array developed by Politecnico di Milano [4]. It is based on a 32×32 SPAD, with in-pixel TDCs, and on-chip microlenses are employed to reach a fill factor of 78%. The time resolution is adjustable down to 250 ps, with 1 μs Full Scale Range (FSR). The measurement duty cycle (i.e. the ration of the TDC FSR and the frame time) can be increased with a multi-gate acquisition scheme. To validate the efficiency of our setup, we tested it using a proof-of-principle object, as shown in Fig. 1b. The reconstructed images, captured with the object placed at 30 cm intervals in an acquisition time of only 30 s, are shown in Fig. 1c. In summary, the shown results confirm the potential of the proposed setup for remote sensing applications, particularly for reflective or diffusive objects. Moreover, the proposed approach could offers the possibility of significantly reduce acquisition times compared to standard QGI setups.
Quantum Ghost Imaging (QGI) is a scheme using entangled pairs of photons (signal and idler) in order to perform imaging with both single photons and with only a single-element detector in the spectrum of interest. It utilises the temporal coincidence of the photons to identify associated pairs, while their spatial correlation allows to obtain image information from of the idler photon from the measurement of the signal photon. It is especially useful when using nondegenerate photon pairs, allowing to keep the signal photon in the silicon detection window, while the interacting wavelength can be freely chosen.However, current schemes are limited, as they rely on time-gating and heralding. Recent advances in single photon avalanche diodes (SPADs) allow the design of new single photon cameras, which can be outfitted with dedicated in-pixel timing circuitry. This allows to register single photons in both time and space. These detectors allowed us to design a new scheme for QGI, in which the coincidence is evaluated after the measurement. It also allows us to perform depth-resolved 3D imaging based on the time-of-flight of photons, first results of which are presented here.