On quantum amplifiers, quantum discrimination and adaptive phase estimation

Pantita Palittapongarnpim, Barry C. Sanders

Masahiro Takeoka, Mark M. Wilde

We determine a fundamental upper bound on the performance of any adaptive protocol for discrimination or estimation of a channel which has an unknown parameter encoded in the state of its environment. Since our approach relies on the principle of data processing, the bound applies to a variety of discrimination measures, including quantum relative entropy, hypothesis testing relative entropy, Rényi relative entropy, fidelity, and quantum Fisher information. We apply the upper bound to thermal (amplifier) channels with a known transmissivity (gain) but unknown excess noise. In these cases, we find that the upper bounds are achievable for several discrimination measures of interest, and the method for doing so is non-adaptive, employing a highly squeezed two-mode vacuum state at the input of each channel use. Estimating the excess noise of a thermal channel is of principal interest for the security of quantum key distribution, in the setting where a fiber-optic cable has a known transmissivity but a tampering eavesdropper alters the excess noise on the channel, so that estimating the excess noise as precisely as possible is desirable. Finally, we outline a practical strategy which can be used to achieve these limits.

D.I Lalović, Dragomir M Davidović, A.R. Tančić

Chunhui Shi, Qi Song, Hongjing Li +4 more

The real-time estimation of a time-varying phase is of great importance in several fields. In order to estimate a time-varying phase with high precision and sensitivity, we propose and experimentally demonstrate an adaptive phase estimation method via weak value amplification by splitting the light into sensing path and monitoring path. In the proposed method, the phase shift can be amplified, an adjustable sensitivity and linear dynamic range can be obtained through the insertion of the reference phase, and a full-range phase estimation could be realized via an appropriate adjustment strategy. Furthermore, detectors with a higher resolution could be selected to detect weak signal by the adjustment of attenuation. Potentially, the phase estimation precision of about 10−8 rad could be achieved with the available equipment.

G.M D'Ariano, C Macchiavello, M.F Sacchi

Hiu Yung Wong