Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP conference proceedings

Numerical examination of structural slow-light delays in fiber Bragg gratings of varied parameters

Matúš Vaňko, Jarmila Müllerová

Published Jan 1, 2019• 2 citations
Publisher

Abstract

Fiber Bragg gratings designed specifically for controlling the group velocity of light have been extensively studied in recent years to explore and improve their properties. Use of slow-light fiber Bragg gratings (FBGs) is increasingly recognized as an important component in the optical telecommunication networks, and plays a key role in resolving a problem of buffering of optical signals. This paper analyzes the slow light mechanism in FBG theoretically, explores the influences of different parameters of FBG on the characteristics of slow light by numerical simulation, and discusses the requirements for achieving large group delays.

DOI
10.1063/1.5119503

Related papers

Slow Light Characteristics of Fiber Bragg Gratings

Shang Yun-b

The influence of grating length and fringe visibility for slow light of fiber Bragg gratings were investigated by numerical simulation method,and slow light after optimizing the parameters was proposed emphatically.The results showed that the slow light delay increases with grating length and modulation depth,and change rates increases gradually.A certain bandwidth of resonance peaks on both sides of the side lobe and the peak top become extremely flattened.The slow light delay curves are red-shifted and short wave strengths increase to the opposite direction.The right side of the center frequency spectrum side band has a great vibration.By optimizing the structure parameters,the maximum group velocity can be lowed to c/98.This provides theoretical basis for designing the slow light devices based on fiber Bragg gratings.

Journal of Lanzhou University of Arts and Science•Jan 1, 2014•0 citations

Tunable delay slow-light in an active fiber Bragg grating

Kai Qian, Li Zhan, Honggen Li +4 more

We proposed and experimentally demonstrated an extremely simple and feasible slow-light technique to achieve tunable optical delay by using the Er/Yb codoped fiber Bragg grating (FBG). The signal light experiences strong dispersion when it is launched into the reflection edge of FBG, and the group delay value is determined by the signal wavelength and the pump power. In the experiment, a controllable delay of 0.9 ns can be obtained through changing the 980 nm pump power. The group velocity can be slowed down to 5.6x10(7) m/s, which is 19% of the speed of light in free space. It provides a very simple approach to control the light group delay, which is likely to have important implications for practical applications.

Optics Express•Nov 19, 2009•57 citations

Dispersionless Slow Light in Fiber Bragg Gratings with Active Materials

Yang Liu, Chun Jiang, Yaming Lin +1 more

In this paper, an atomic system is suggested to be embedded in the fiber Bragg gratings (FBG) to reduce the group velocity and to eliminate the dispersion of slow light. We demonstrate numerically that the pulse can be transmitted at the group velocity 0.147c dispersionlessly in the FBG, compared with 0.193c and 56% of FWHM broadening without the atomic system.

Symposium on Photonics and Optoelectronics•Jun 1, 2010•0 citations

Structural slow light in fiber Bragg gratings and its applications in ultra-highresolution sensing

Michel J. F. Digonnet, George Skolianos, Martin Bernier

We review the principle of structural slow light in strong fiber Bragg gratings and their unique applications, including delay lines with group velocities of only hundreds of km/s and femtostrain sensors that can resolve thermodynamic phase noise.

Photonics and Fiber Technology Congress (ACOFT, BGPP, NP)•Jan 1, 2016•0 citations

Dynamic All Optical Slow Light Tunability by Using Nonlinear One Dimensional Coupled Cavity Waveguides

Alireza Bananej, S. Morteza, S. M. +2 more

Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].

InTech eBooks•Mar 30, 2012•0 citations

Slow Light in Optical Fibers

Shanglin Hou, Wei Qiu

The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.

InTech eBooks•Jan 25, 2012•0 citations
Fiber Bragg gratings designed specifically for controlling the group velocity of light have been extensively studied in recent years to explore and improve their properties. Use of slow-light fiber Bragg gratings (FBGs) is increasingly recognized as an important component in the optical telecommunication networks, and plays a key role in resolving a problem of buffering of optical signals. This paper analyzes the slow light mechanism in FBG theoretically, explores the influences of different parameters of FBG on the characteristics of slow light by numerical simulation, and discusses the requirements for achieving large group delays.
The influence of grating length and fringe visibility for slow light of fiber Bragg gratings were investigated by numerical simulation method,and slow light after optimizing the parameters was proposed emphatically.The results showed that the slow light delay increases with grating length and modulation depth,and change rates increases gradually.A certain bandwidth of resonance peaks on both sides of the side lobe and the peak top become extremely flattened.The slow light delay curves are red-shifted and short wave strengths increase to the opposite direction.The right side of the center frequency spectrum side band has a great vibration.By optimizing the structure parameters,the maximum group velocity can be lowed to c/98.This provides theoretical basis for designing the slow light devices based on fiber Bragg gratings.
We proposed and experimentally demonstrated an extremely simple and feasible slow-light technique to achieve tunable optical delay by using the Er/Yb codoped fiber Bragg grating (FBG). The signal light experiences strong dispersion when it is launched into the reflection edge of FBG, and the group delay value is determined by the signal wavelength and the pump power. In the experiment, a controllable delay of 0.9 ns can be obtained through changing the 980 nm pump power. The group velocity can be slowed down to 5.6x10(7) m/s, which is 19% of the speed of light in free space. It provides a very simple approach to control the light group delay, which is likely to have important implications for practical applications.
Light propagation at slow speed, delaying light, has a tremendous role in a wide range of advanced technology from peta-bit optical networks to even laser fusion technology [1,2]. Recently, it was realized that delaying of an optical signal is useful for a number of applications such as optical buffering, signal processing, optical sensing and enhancement of optical nonlinearity in materials [3]. Also, as a consequence of important role of fiber lasers in laser fusion technology, coherent beam combining of several fiber lasers for achieving high power output is a crucial problem in future fusion technology. This task can be overcome by using proper engineered photonic components for achieving specific group delay time [2].
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.