Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics and Photonics Journal

Photon Storage in a Dynamic Two-Ring-Two-Bus System

Zhifang Guo, Qingzhong Huang

Published Jan 1, 2019• 2 citations
Publisher

Abstract

We propose a novel dynamic two-ring-two-bus system to achieve photon storage. We have demonstrated numerically that the photon can be stopped and released by tuning the ring coupled to two buses in a short time. The two-ring-two-bus system is fabricated on the silicon-on-insulator platform, with the Q factor changing significantly when shifting one resonance. Due to the flexibility and simplicity, it is a promising candidate for the future optical storage and buffering device.

DOI
10.4236/opj.2019.98b003

Related papers

Proposal and demonstration of a controllable Q factor in directly coupled microring resonators for optical buffering applications

Ying Zhang, Qiang Liu, Chenyang Mei +3 more

Optical resonators with controllable Q factors are key components in many areas of optical physics and engineering. We propose and investigate a Q -factor controllable system composed of two directly coupled microring resonators, one of which is tunable and coupled to dual waveguides. By shifting the resonance of the controllable microring, the Q factor of the system as well as the other microring changes significantly. We have demonstrated wide-range controllable Q factors based on this structure in silicon-on-insulator, for example. The influences of spectral detuning and coupling strength between two resonators on the variation of Q factors are studied in detail experimentally. Then, we explore its applications in optical buffering. Tunable fast-to-slow/slow-to-fast light has been carried out by switching the system between the high- Q state and low- Q state. Moreover, optical pulse capture and release are also achievable using this structure with dynamic tuning, and the photon storage properties are investigated. The proposed Q -factor tunable system is simple, flexible, and realizable in various integrated photonic platforms, allowing for potential applications in on-chip optical communications and quantum information processing.

Photonics Research•Aug 17, 2021•18 citations

Controllable optical quality factor in a two-ring-two-bus structure

Ying Zhang, Qingzhong Huang, Liu Qiang

Dynamically tuning Q factor in optical resonators is now more feasible in information processing applications, such as light storage and wavelength conversion. This paper proposed and demonstrated a new dynamically tuning Q approach that is realized in coupled two rings structure. One resonator uses an add-drop configuration, coupled to another single micro-ring. The heating causes an increase in the refractive index, which in turn causes resonant wavelength redshift. This shift is a switch to control the coupling between the two rings, to tune the linewidth of light confined in the ring, equivalent to tune the quality factor. And we adjust the detuning and coupling state between the two rings to control the light coupled into the resonator. The Q factor decreases from 56,525 to 16,450 in the transmission spectrum with the different heater power. In this way, we successfully realized a modulation of the Q from high to low states in the structure. Besides, the original coupling spacing between the two rings also has an influence on the Q factor. The larger the coupling spacing, the higher the Q factor. In addition, we also study the changes of phase and delay time in the tunable process. The results show that the change of fast light (high Q) and slow light (low Q) can be realized at the same time, which would enable applications for on-chip adjustable time delay, fast/slow light and light storage.

International Conference on Photonics and Optical Engineering•Jan 15, 2021•2 citations

Optical bistability analysis inside a two-bus ring resonator

Gino Priem, Pieter Dumon, Wim Bogaerts +3 more

We demonstrate experimentally optical bistability inside a two-bus ring resonator fabricated in silicon-on-insulator with a power of only 680 /spl mu/W. We have analysed the different contributions leading to this bistable behaviour and show that the dominant nonlinear effects are free carrier based.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Jan 1, 2005•0 citations

Development of a High Performance Resonant Photon-Pair Source in Silicon

Jeffrey A. Steidle

One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.

•Jan 1, 2019•0 citations

Integrated photon sources for quantum information science applications

Paul M. Alsing, Dirk Englund, Neville A. Mogent +8 more

Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

•Oct 5, 2017•1 citation

Photon manipulation in silicon nanophotonic circuits

Ali W. Elshaari

Quantum-based communication systems can potentially achieve the ultimate security from eavesdropping and greatly reduce the operating powers on chip. Light-speed transmission, noise immunity, and low noise properties make photons indispensable for quantum communication to transfer a quantum state through a transmission line. Furthermore, the field of silicon nanophotonics is fast growing field which is driven by the attractive and promising improvements it has to offer in high speed communication systems and on chip optical interconnects. Consequently, there is a high demand to develop the building blocks for photon manipulation in silicon nanophotonic circuits. The goal of the work is to enable high performance optoelectronic computing and communication systems that overcome the barriers of electronics and dramatically enhance the performance of circuits and systems. We will focus our attention on solving some of the issues with the current systems regarding photon storage, routing, isolation, switching, and energy conversion. We realize a continuously tunable optical memory which breaks the time-bandwidth limit by more than thirty times. This enabled the storage of ultra-short pulses of light for hundreds of picoseconds. Also, we investigate on-chip photon scattering when transmitted through micro-scale optical cavities. In addition, we develop novel dynamic quantum mechanical models that predict quantum-like behavior of single and multi-photon wavepackets. Furthermore, we report for the first time that efficient red shifts in silicon are achievable with free carrier injection which generally produces blue wavelength shifts. We realize adiabatic wavelength conversion and discrete photonic transitions of single photons in silicon cavities. Moreover, we demonstrate a basic quantum network on chip with an on-chip photon source. We present a novel design for CMOS compatible optical isolator on silicon chip using a system of active cavities. And finally, we analyze a novel ultra-fast broadband modulator in silicon based on free-carrier absorption effect in SOI waveguides integrated with Schottky diodes.

•Dec 1, 2011•1 citation
We propose a novel dynamic two-ring-two-bus system to achieve photon storage. We have demonstrated numerically that the photon can be stopped and released by tuning the ring coupled to two buses in a short time. The two-ring-two-bus system is fabricated on the silicon-on-insulator platform, with the Q factor changing significantly when shifting one resonance. Due to the flexibility and simplicity, it is a promising candidate for the future optical storage and buffering device.
Optical resonators with controllable Q factors are key components in many areas of optical physics and engineering. We propose and investigate a Q -factor controllable system composed of two directly coupled microring resonators, one of which is tunable and coupled to dual waveguides. By shifting the resonance of the controllable microring, the Q factor of the system as well as the other microring changes significantly. We have demonstrated wide-range controllable Q factors based on this structure in silicon-on-insulator, for example. The influences of spectral detuning and coupling strength between two resonators on the variation of Q factors are studied in detail experimentally. Then, we explore its applications in optical buffering. Tunable fast-to-slow/slow-to-fast light has been carried out by switching the system between the high- Q state and low- Q state. Moreover, optical pulse capture and release are also achievable using this structure with dynamic tuning, and the photon storage properties are investigated. The proposed Q -factor tunable system is simple, flexible, and realizable in various integrated photonic platforms, allowing for potential applications in on-chip optical communications and quantum information processing.
Dynamically tuning Q factor in optical resonators is now more feasible in information processing applications, such as light storage and wavelength conversion. This paper proposed and demonstrated a new dynamically tuning Q approach that is realized in coupled two rings structure. One resonator uses an add-drop configuration, coupled to another single micro-ring. The heating causes an increase in the refractive index, which in turn causes resonant wavelength redshift. This shift is a switch to control the coupling between the two rings, to tune the linewidth of light confined in the ring, equivalent to tune the quality factor. And we adjust the detuning and coupling state between the two rings to control the light coupled into the resonator. The Q factor decreases from 56,525 to 16,450 in the transmission spectrum with the different heater power. In this way, we successfully realized a modulation of the Q from high to low states in the structure. Besides, the original coupling spacing between the two rings also has an influence on the Q factor. The larger the coupling spacing, the higher the Q factor. In addition, we also study the changes of phase and delay time in the tunable process. The results show that the change of fast light (high Q) and slow light (low Q) can be realized at the same time, which would enable applications for on-chip adjustable time delay, fast/slow light and light storage.
One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.
Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.
Quantum-based communication systems can potentially achieve the ultimate security from eavesdropping and greatly reduce the operating powers on chip. Light-speed transmission, noise immunity, and low noise properties make photons indispensable for quantum communication to transfer a quantum state through a transmission line. Furthermore, the field of silicon nanophotonics is fast growing field which is driven by the attractive and promising improvements it has to offer in high speed communication systems and on chip optical interconnects. Consequently, there is a high demand to develop the building blocks for photon manipulation in silicon nanophotonic circuits. The goal of the work is to enable high performance optoelectronic computing and communication systems that overcome the barriers of electronics and dramatically enhance the performance of circuits and systems. We will focus our attention on solving some of the issues with the current systems regarding photon storage, routing, isolation, switching, and energy conversion. We realize a continuously tunable optical memory which breaks the time-bandwidth limit by more than thirty times. This enabled the storage of ultra-short pulses of light for hundreds of picoseconds. Also, we investigate on-chip photon scattering when transmitted through micro-scale optical cavities. In addition, we develop novel dynamic quantum mechanical models that predict quantum-like behavior of single and multi-photon wavepackets. Furthermore, we report for the first time that efficient red shifts in silicon are achievable with free carrier injection which generally produces blue wavelength shifts. We realize adiabatic wavelength conversion and discrete photonic transitions of single photons in silicon cavities. Moreover, we demonstrate a basic quantum network on chip with an on-chip photon source. We present a novel design for CMOS compatible optical isolator on silicon chip using a system of active cavities. And finally, we analyze a novel ultra-fast broadband modulator in silicon based on free-carrier absorption effect in SOI waveguides integrated with Schottky diodes.