Superfluid helium's low-loss dielectric properties, excellent thermal conductivity, and unique collective excitations make it an attractive candidate to incorporate into superconducting qubit systems. We controllably immerse a three-dimensional superconducting transmon qubit in superfluid
4He and measure the spectroscopic and coherence properties of the system. We find that the cavity, the qubit, and their coupling are all modified by the superfluid, which we analyze within the framework of circuit quantum electrodynamics. At temperatures relevant to quantum computing experiments, the energy relaxation time of the qubit is not significantly changed by the presence of the superfluid, while the pure dephasing time modestly increases, which we attribute to improved thermalization of the microwave environment via the superfluid.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an
Al/AlOx/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of
ω01=5.0122 GHz and an anharmonicity of
α/2π=−202.4 MHz , corresponding to
EJ/EC≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of
g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of
QL=6127 and a Purcell limit of
T1Purcell≈82 μs . Time-domain measurements yield coherence times of
T1=17.4 μs and
T2∗=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
Superconducting qubits, realized by incorporating Josephson junctions into superconducting circuits, behave as artificial atoms with anharmonic energy spectra and can be precisely controlled and measured using microwave cavities within the framework of circuit quantum electrodynamics (cQED). Since its emergence in the early 2000s, cQED has established superconducting qubits as leading candidates for scalable quantum devices and has enabled the exploration of hybrid quantum systems that integrate disparate physical platformsThis review surveys superconducting hybrid quantum electromechanical systems in which mechanical resonators are coupled to superconducting qubits, with a focus on two widely used qubit platforms: the transmon and the fluxonium. We provide an overview of the underlying coupling mechanisms arising from interactions through the phase and charge degrees of freedom of the qubit, and discuss how these mechanisms give rise to both longitudinal and transverse qubit-mechanical interactions. We further review extensions of electromechanical platforms to electro-optomechanical architectures, in which optical cavities are integrated to enable coherent interfacing between superconducting circuits and optical photons. This review aims to present a unified framework and perspective on qubit-mechanical and qubit-mechanical-optical hybrid systems in superconducting quantum technologies and applications related to sensors.
Frequency tunability of three dimensional (3D) microwave cavities opens up numerous possibilities for their use in hybrid quantum systems and related technologies. For many applications, it is desirable to tune the resonance at cryogenic temperatures without mechanical actuation. We show that a superconducting 3D microwave cavity can be tuned at the percent level by taking advantage of the dielectric properties of superfluid 4He at millikelvin temperatures, without affecting its intrinsic quality factor—reaching 3 × 105 in the present experiment.
Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.
Microwave-to-optical quantum state transfer enables the interconnection of remote superconducting quantum processors via optical-fiber links. Achieving high conversion efficiency necessitates an intense optical pump, yet direct optical exposure of superconducting circuits often degrades their performance. Efficient and fast thermalization of superconducting qubits is therefore essential. To achieve this, we immerse a laser-illuminated transmon qubit in superfluid helium-4 and investigate its behavior. We observe that the qubit recovers significantly faster in superfluid helium than in vacuum, with an improvement in power handling by over 10 dB. This enhanced cooling capacity supports higher optical pump powers, shortening recovery times after high-power optical pulses. These findings open a promising pathway for future efficient implementation of microwave-to-optical quantum transduction devices.