A key milestone on the path towards building a quantum computer will be the demonstration of an algorithm which exceeds the capabilities of any classical computer - achieving so called quantum supremacy. The challenge in developing such an algorithm lies in balancing computational complexity with experimental feasibility, particularly in the presence of errors. In this thesis, we design superconducting qubits and algorithms with the goal of finding such a balance. We implement a wide variety of control protocols, including parametric drive, adiabatic control, floquet evolution and time-domain spectroscopy. These tools are used to the study topological invariants, quantum chaos, quantum statistical mechanics, chiral symmetry breaking and many-body localization. We present experimental techniques for characterizing the complexity and fidelity of these algorithms and show that quantum supremacy is achievable using existing technology.
A key milestone on the path towards building a quantum computer will be the demonstration of an algorithm which exceeds the capabilities of any classical computer - achieving so called quantum supremacy. The challenge in developing such an algorithm lies in balancing computational complexity with experimental feasibility, particularly in the presence of errors. In this thesis, we design superconducting qubits and algorithms with the goal of finding such a balance. We implement a wide variety of control protocols, including parametric drive, adiabatic control, floquet evolution and time-domain spectroscopy. These tools are used to the study topological invariants, quantum chaos, quantum statistical mechanics, chiral symmetry breaking and many-body localization. We present experimental techniques for characterizing the complexity and fidelity of these algorithms and show that quantum supremacy is achievable using existing technology.
Nonlinear superconducting circuits are a leading candidate to implement quantum information tasks beyond the reach of classical processors. One such task, quantum simulation, involves using a controllable quantum system to study the dynamics of another. In this thesis, we present a series of experiments using small systems of superconducting circuits to perform various quantum tasks relevant to quantum simulation.In the first experiment, we design and build a circuit comprising three transmon qubits whose dynamics mirror those of interacting bosonic particles on a lattice, described by the Bose-Hubbard Hamiltonian. We verify the predictions of the Bose-Hubbard model for this system spectroscopically and then use time-domain measurements to study the decoherence processes affecting the qubits. Using a Raman process, we engineer artificial decay dynamics in the system which allow us to prepare and stabilize otherwise inaccessible states of the transmon array.The second experimental demonstration concerns topological quantum matter. Certain quantum systems are characterized by quantities known as topological invariants, which are robust to local perturbations. These topological invariants are challenging to measure in naturally-occurring systems. We engineer an artificial system, comprising a transmon qubit coupled to a high-Q cavity, capable of undergoing a protocol known as the quantum walk, which also exhibits topological invariants. By using particular non-classical state of the cavity, we modify the quantum walk protocol to make the topological invariant directly accessible.Finally, we implement a hybrid quantum-classical algorithm—known as the variational quantum eigensolver—in a two-transmon quantum processor. As a proof of principle demonstration, we compute the ground-state and low-lying excited state energies of the hydrogen molecule as a function of nuclear separation. We show that an extension of the basic algorithm, known as the quantum subspace expansion, allows for the mitigation of errors caused by decoherence processes affecting the quantum processor.
A key step toward demonstrating a quantum system that can address difficult problems in physics and chemistry will be performing a computation beyond the capabilities of any classical computer, thus achieving so-called quantum supremacy. In this study, we used nine superconducting qubits to demonstrate a promising path toward quantum supremacy. By individually tuning the qubit parameters, we were able to generate thousands of distinct Hamiltonian evolutions and probe the output probabilities. The measured probabilities obey a universal distribution, consistent with uniformly sampling the full Hilbert space. As the number of qubits increases, the system continues to explore the exponentially growing number of states. Extending these results to a system of 50 qubits has the potential to address scientific questions that are beyond the capabilities of any classical computer.
This study aims to analyze recent developments in quantum supremacy by comparing the computational performance of stabilized superconducting qubit systems with classical supercomputing capabilities. A systematic literature review was conducted on major experimental studies published between 2019 and 2024, focusing on random circuit sampling, qubit stability, gate fidelity, and computational runtime comparisons. The analysis covers key quantum processors, including Sycamore and Zuchongzhi, by evaluating three main parameters: number of qubits, circuit complexity, and performance gap relative to classical simulation.The results show that quantum processors with 50–100 qubits and high gate fidelity are able to complete specific sampling tasks within seconds to hours, whereas equivalent classical simulations would require thousands to billions of years. The findings also indicate that computational advantage increases exponentially with system scale and is strongly influenced by qubit stability and error suppression techniques. Although the demonstrated tasks remain specialized and not yet applicable to practical problems, the evidence confirms that stabilized qubit systems have achieved a measurable computational regime beyond classical feasibility.This review provides a clear synthesis of current experimental achievements and highlights that future progress toward practical quantum advantage depends on improvements in error correction, scalability, and hardware reliability.
The discovery of quantum mechanics in the 20th century forms the basis of many of the technologies that define our lives today. The ability to engineer and manipulate individual quantum systems -- even create artificial atoms -- promises a similar revolutionary leap in technology. A quantum technology of particular interest is quantum computing, which has the potential to solve problems that are intractable for classical computers, opening up new domains of computation. Meanwhile, an attractive approach to creating engineered quantum systems is circuit quantum electrodynamics (cQED). Where research initially focused on understanding the physics of cQED devices, focus has shifted to building systems capable of performing useful computations. However, this remains extremely challenging, in part due to the inherently fragile nature of the individual quantum bits, but also due to difficulties in controlling and scaling up these systems. This thesis focuses on the control aspects of building an extensible full-stack quantum computer based on superconducting transmon qubits. We define the demonstration of quantum fault-tolerance as our target application to give focus to our efforts. The QuSurf architecture for a full-stack quantum computer presented in this thesis is designed with this application in mind. We provide a detailed study of the error sources present in this system and give an overview of the relevant characterization techniques. In the second part of this thesis, we address several key challenges in the control of a quantum computer. To realize high-fidelity coherence limited gates, we present a novel tuneup protocol that achieves a tenfold speedup over the state-of-the-art. This is realized by eliminating the need for qubit initialization. We demonstrate this protocol by calibrating single-qubit gates to a coherence limited Clifford fidelity of 99.9% in one minute. Performing repeated parity checks, as is required for quantum error correction, requires reusing qubits quickly after they have been measured. By introducing a numerically optimized depletion pulse we are able to speeds up the depletion of measurement photons in a readout resonator without having to rely on specific symmetry conditions. Using this technique speed up photon depletion by more than six inverse resonator linewidths, reducing the error rate in an emulated ancilla parity check by a factor 75. Flux-pulsing based two-qubit gates are the fastest two-qubit gates. However, they are also very technically demanding. The key challenge in performing these gates is addressing the distortions that control signals experience as they traverse various electrical components. We have developed Cryoscope (short for cryogenic oscilloscope) to characterize and correct these distortions. Cryoscope is an in-situ technique that uses the qubit to sample control pulses of arbitrary shape. Even when correcting distortions to within sim0.1 two-qubit gates are history-dependent due to the long timescale upon which some of these distortions act. We have invented Net-Zero, a new type of flux-pulsing based two-qubit gate, to address this problem. It makes use of a symmetry condition of the transmon to have net-zero integral, making the gate resilient to long-timescale distortions. The gate suppresses leakage out of the computational subspace to 0.1% by making use of leakage interference and has a built-in echo effect that enhances the coherence of the gate, achieving a two-qubit gate fidelity of 99.1%. Custom software is required to perform the physics experiments needed to build and operate a quantum computer. PycQED is an open-source software framework we have developed for this purpose. We discuss the design choices and concepts of PycQED before turning our focus to characterization and calibration. Here we introduced dependency graphs as a useful abstraction and system emulation as an essential development tool for automating the characterization and calibration process. We conclude the thesis by reflecting on the limitations of our architecture and providing an outlook on the grand challenges of building a useful kilo-qubit sized quantum computer. We define these challenges as The Application Problem, The Fabrication Problem, and The Calibration Problem.
In the last decade, quantum information processing has transformed from a field of mostly academic research to an applied engineering subfield with many commercial companies announcing strategies to achieve quantum advantage and construct a useful universal quantum computer. Continuing efforts to improve qubit lifetime, control techniques, materials and fabrication methods together with exploring ways to scale up the architecture have culminated in the recent achievement of quantum supremacy using a programmable superconducting processor -- a major milestone in quantum computing en route to useful devices. Marking the point when for the first time a quantum processor can outperform the best classical supercomputer, it heralds a new era in computer science, technology and information processing.One of the key developments enabling this transition to happen is the ability to exert more precise control over quantum bits and the ability to detect and mitigate control errors and imperfections. In this thesis, ways to efficiently control superconducting qubits are explored from the experimental viewpoint.We introduce a state-of-the-art experimental machinery enabling one to perform one- and two-qubit gates focusing on the technical aspect and outlining some guidelines for its efficient operation. We describe the software stack from the time alignment of control pulses and triggers to the data processing organisation. We then bring in the standard qubit manipulation and readout methods and proceed to describe some of the more advanced optimal control and calibration techniques.The described toolbox together with some newly developed advances such as multi-level single-shot readout are applied to a practical problem of generating high-quality random numbers. Following the recent advances in the field, we certify our generator based on the Kochen-Specker theorem utilizing contextuality of quantum mechanics as an underlying resource of randomness. Our implementation based on the solid-state circuit quantum electrodynamics (QED) platform and the new certification scheme allows us to greatly enhance the bit rate of certified quantum random number generators (QRNGs) and approach the requirements for real-world applications.Addressing some of the control and state preparation errors, we develop a set of techniques to use a qubit as an in situ probe of distortions of its control lines and its effective temperature. Considering a qubit simultaneously driven by a longitudinal and a transverse MW-drives under certain resonant conditions, we show that in the rotating dressed-state picture (second rotating frame) one can get information about both the amplitude and the phase of the drive signals. This allows us to employ a qubit as an on-chip vector network analyzer and precisely measure the transfer functions of its control lines. As no other method with comparable frequency domain coverage exists, we verify our technique by cancelling out the distortions and increasing the fidelity of entangling two-qubit CPHASE gate.Finally, we show that the decay of the correlations between two sequential measurements of a quantum bit is a manifestation of its nonzero effective temperature. We use it to develop a precise method of evaluating the qubits population allowing for virtually unlimited suppression of absolute errors. We realize the method and demonstrate its applicability to the calibration of a quantum processor and evaluation of active reset techniques. As the actual mechanism of the increased excited-state population is currently unknown, we use our method's precision to show the qubit’s coupling to two separate independent thermal baths. We also introduce the ‘temperature spectroscopy’ as a tool to acquire more information about the qubits spurious excitation sources.
Quantum computing stands at the frontier of computational revolution, promising to transform our ability to solve problems that remain intractable for today's most powerful classical computers. This article explores the fundamental principles of quantum computing, where quantum mechanical phenomena such as superposition and entanglement enable unprecedented parallel processing capabilities. We examine why quantum computers have become a focal point of global research and development, with potential applications ranging from drug discovery and climate modeling to breaking current encryption standards and optimizing complex logistics. The text delves into the various approaches being pursued in quantum computer development, including superconducting circuits, trapped ions, and topological qubits, while addressing the significant challenges of maintaining quantum coherence and minimizing errors. By examining both the theoretical framework and practical implementation efforts, this article provides a comprehensive overview of quantum computing's current state, its transformative potential, and the roadmap toward achieving quantum supremacy.