Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Internet of Things Journal

RAV: Relay Aided Vectorized Secure Transmission in Physical Layer Security for Internet of Things Under Active Attacks

Ning Zhang, Renyong Wu, Shenglan Yuan, Chao Yuan, Dajiang Chen

Published May 28, 2019• 69 citations
Publisher

Abstract

Internet of Things (IoT) security becomes of great importance, as IoT is the foundation for many emerging services. To safeguard IoT security, cryptosystems at upper layer relying on sophisticated key management alone can face many challenges due to the massive deployment of resource constrained machine-type communication (MTC) devices. Physical layer (PHY) security can complement and enhance IoT security, by exploiting the characteristics of the bottom layer. In PHY security, channel state information (CSI) estimated through reverse pilot training is essential for the sender to select appropriate beamforming/precoder, which however is also vulnerable to adversaries. An adversary can actively launch pilot contamination attacks to affect the channel estimation and improve its signal reception quality. In this paper, we propose a relay-aided vectorized (RAV) secure transmission scheme, to safeguard the downlink communication in IoT networks under potential pilot contamination attacks. The proposed scheme does not distinguish the pilot sequences sent from an adversary and the receiver; and the sender utilizes what it receives to estimate the CSI for beamforming/precoder design. Then, a set of data symbols are presuperposed using a random complex matrix to form signal vectors to send. Through cooperation with a relay, the signal vectors can be recovered by the intended receiver whereas the adversary or the relay cannot, as proved through security analysis. The simulation results also demonstrate that the bit error rate (BER) of the adversary is 0.5 regardless of its channel quality, indicating perfect secrecy is achieved.

DOI
10.1109/jiot.2019.2919743

Related papers

Secure Beamforming Design in Relay-Assisted Internet of Things

Pingmu Huang, Yunqin Hao, Tiejun Lv +3 more

A secure downlink transmission system which is exposed to multiple eavesdroppers and is appropriate for Internet of Things (IoT) applications is considered. A worst case scenario is assumed, in the sense that, in order to enhance their interception ability all eavesdroppers are located close to each other, near the controller and collude to form joint receive beamforming. For such a system, a novel cooperative nonorthogonal multiple access (NOMA) secure transmission scheme for which an IoT device with a stronger channel condition acts as an energy harvesting relay in order to assist a second IoT device operating under weaker channel conditions, is proposed and its performance is analyzed and evaluated. A secrecy sum rate (SSR) maximization problem is formulated and solved under three constraints: 1) transmit power; 2) successive interference cancellation; and 3) quality of service. By considering both passive and active eavesdroppers scenarios, two optimization schemes are proposed to improve the overall system SSR. On the one hand, for the passive eavesdropper scenario, an artificial noise-aided secure beamforming scheme is proposed. Since this optimization problem is nonconvex, instead of using traditional but highly complex, brute-force 2-D search, it is conveniently transformed into a convex one by using an epigraph reformulation. On the other hand, for the active multiantennas eavesdroppers’ scenario, the orthogonal-projection-based beamforming scheme is considered, and by employing the successive convex approximation method, a suboptimal solution is proposed. Furthermore, since for single antenna transmission the orthogonal-projection-based scheme may not be applicable a simple power control scheme is proposed. Various performance evaluation results obtained by means of computer simulations have verified that the proposed schemes outperform other benchmark schemes in terms of SSR performance.

arXiv:1905.06383•IEEE Internet of Things Journal•Apr 2, 2019•43 citations

Cooperative Relay Based on Machine Learning for Enhancing Physical Layer Security

Jintao Xing, Tiejun Lv, Xuewei Zhang

Physical layer security is a crucial technology to achieve secure information transmission. However, emerging technologies, such as machine learning, impose significant challenges on existing security systems. In this paper, we propose a new relay system to achieve physical layer secure transmission and construct a deep learning model on the relay to design secure beamforming vector. This design is able to adapt to the current channel of the legitimate user and resist the eavesdropping from eavesdroppers. The model takes the channel’s statistical characteristic into account and it can learn the channel state information (CSI) to design secure beamforming in order to against eavesdropping effectively. The performance of bit error rate (BER) is close to the Shannon limit when the receiver demodulates the received signals, and we also ensure that the eavesdroppers cannot demodulate the transmitted signals. In addition, we design a power allocation algorithm, which considers the eavesdropper’s CSI on the relay. Simulation results show that the proposed model is able to reach the pre-defined BER requirements. The model can maximize the system security rate by optimizing power allocation at the relay.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2019•16 citations

Cooperative Jamming for Physical Layer Security Enhancement in Internet of Things

Lin Hu, Hong Wen, Bin Wu +5 more

Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.

IEEE Internet of Things Journal•Nov 28, 2017•249 citations

A Two-Dimensional Vectorized Secure Transmission Scheme for Wireless Communications

Renyong Wu, Chao Yuan, Ning Zhang +1 more

Wireless communication security can be enhanced by leveraging the characteristics of the physical (PHY) layer, where discriminatory scrambling can be employed at the symbol level to either improve the signal quality of the legitimate receiver or degrade that of the eavesdroppers. However, in the presence of multiple passive eavesdroppers with more antennas than the transmitter, the transmitted signals can still be reliably separated from random disturbances. To mitigate this challenge, we propose a two-dimensional vectorized secure transmission scheme. Unlike existing transmission schemes (where the same data symbol is sent over each antenna with a predesigned complex weight at a time), in the proposed scheme, a sequence of data symbols in a predefined order (named symbol vector) is first pre-superposed through pre-coding with a random complex matrix prior to been sent as a vector in parallel over each transmitting antenna at a time. As a result, physical randomness of the legitimate channel is introduced into the received signals at passive eavesdroppers in the pre-coding procedure. Moreover, to ensure that transmitted data symbols can be recovered in the right order, each symbol vector is sent repeatedly, according to the principle of maximum entropy. To ensure the intended receiver can recover the transmitted symbol vector, the random pre-coding matrices are selected such that a linear constraint imposed by the CSI of the legitimate channel is satisfied. In addition, an extended maximum likelihood (ML) detection method is developed for the desired receiver while the random pre-coding matrices are not required to be transmitted. We then analyze its security based on the signal detection theory to demonstrate that the intended receiver can recover the transmitted symbol vectors while the eavesdroppers are not capable of doing so. We also evaluate the performance of the proposed scheme to demonstrate its effectiveness.

IEEE Transactions on Information Forensics and Security•Nov 20, 2019•4 citations

Improving the Physical Layer Security of the Internet of Things (IoT)

Ali Alsadi, Seshadri Mohan

The Internet of Things (IoT) is one of the most promising technological revolutions. However, the IoT is inherently vulnerable to attacks. In this paper, we propose to enhance the physical layer security of the IoT by using a technique called information passing and interference addition. In the physical layer security analysis, the achieved secrecy rate has an inverse relationship with the intruder's distance to the legitimate transmitter. Our work is, first, to increase the achievable secrecy rate by letting the legitimate transmitter find an alternative route to the fusion center that could achieve a higher secrecy rate than the direct route. Hence, the legitimate transmitter must not disclose the actual information to the fusion center if there is an eavesdropper located between them, and rather must pass its information to another node via a directional antenna to concentrate the power towards the intended receiving node. Passing the information to the nearest node must happen under the condition that there is no intruder in between. Second, we use simultaneous multi-stream beamforming transmission to strengthen the legitimate receiver's signal-to-noise ratios and at the same time poison the eavesdropper channel with interference. Third, we disclose false information to the intruder. We created the system design and investigated the secrecy analysis of that system. Also, we discussed the use of directional antennas on the legitimate nodes. The result showed that using directional antennas would increase the probability of having at least one secure connection coming out of the node to the other legitimate nodes. Moreover, the results showed that using the simultaneous multi-stream beamforming improved the legitimate channel's achievable secrecy rate and that it has superiority over the directional antenna effect.

IEEE International Smart Cities Conference (ISC2)•Sep 1, 2018•1 citation

Secure Key Distribution Scheme in IoT Networks Exploiting Channel State Information

Tasneem Alshamaseen, Saud Althunibat, Marwa Qaraqe +1 more

The Internet of Things (IoT) is a popular technology that refers to a network of internet-connected physical devices that interact to perform tasks with minimal human intervention. However, as these networks expand, ensuring their security becomes challenging due to the communication broadcasting nature and extensive data exchanges. Traditional cryptographic security methods may not be optimal due to the constrained resources of loT devices. In this study, we propose a novel secure key distribution scheme from a physical layer perspective suitable for an loT environment. The proposed scheme takes advantage of the availability of Channel State Information (CSI) at both ends of the communication to enhance security. Specifically, CSI is utilized to precode the key symbols during the key distribution process. Additionally, the scheme employs the xor operation to add an extra layer of difficulty for potential eavesdroppers that attempt to retrieve the transmitted key symbols. The performance of the proposed scheme is evaluated in terms of Key Error Rate (KER) at legitimate nodes and eavesdroppers by using Monte Carlo simulations.

IEEE Vehicular Technology Conference•Jun 24, 2024•0 citations
Internet of Things (IoT) security becomes of great importance, as IoT is the foundation for many emerging services. To safeguard IoT security, cryptosystems at upper layer relying on sophisticated key management alone can face many challenges due to the massive deployment of resource constrained machine-type communication (MTC) devices. Physical layer (PHY) security can complement and enhance IoT security, by exploiting the characteristics of the bottom layer. In PHY security, channel state information (CSI) estimated through reverse pilot training is essential for the sender to select appropriate beamforming/precoder, which however is also vulnerable to adversaries. An adversary can actively launch pilot contamination attacks to affect the channel estimation and improve its signal reception quality. In this paper, we propose a relay-aided vectorized (RAV) secure transmission scheme, to safeguard the downlink communication in IoT networks under potential pilot contamination attacks. The proposed scheme does not distinguish the pilot sequences sent from an adversary and the receiver; and the sender utilizes what it receives to estimate the CSI for beamforming/precoder design. Then, a set of data symbols are presuperposed using a random complex matrix to form signal vectors to send. Through cooperation with a relay, the signal vectors can be recovered by the intended receiver whereas the adversary or the relay cannot, as proved through security analysis. The simulation results also demonstrate that the bit error rate (BER) of the adversary is 0.5 regardless of its channel quality, indicating perfect secrecy is achieved.
A secure downlink transmission system which is exposed to multiple eavesdroppers and is appropriate for Internet of Things (IoT) applications is considered. A worst case scenario is assumed, in the sense that, in order to enhance their interception ability all eavesdroppers are located close to each other, near the controller and collude to form joint receive beamforming. For such a system, a novel cooperative nonorthogonal multiple access (NOMA) secure transmission scheme for which an IoT device with a stronger channel condition acts as an energy harvesting relay in order to assist a second IoT device operating under weaker channel conditions, is proposed and its performance is analyzed and evaluated. A secrecy sum rate (SSR) maximization problem is formulated and solved under three constraints: 1) transmit power; 2) successive interference cancellation; and 3) quality of service. By considering both passive and active eavesdroppers scenarios, two optimization schemes are proposed to improve the overall system SSR. On the one hand, for the passive eavesdropper scenario, an artificial noise-aided secure beamforming scheme is proposed. Since this optimization problem is nonconvex, instead of using traditional but highly complex, brute-force 2-D search, it is conveniently transformed into a convex one by using an epigraph reformulation. On the other hand, for the active multiantennas eavesdroppers’ scenario, the orthogonal-projection-based beamforming scheme is considered, and by employing the successive convex approximation method, a suboptimal solution is proposed. Furthermore, since for single antenna transmission the orthogonal-projection-based scheme may not be applicable a simple power control scheme is proposed. Various performance evaluation results obtained by means of computer simulations have verified that the proposed schemes outperform other benchmark schemes in terms of SSR performance.
Physical layer security is a crucial technology to achieve secure information transmission. However, emerging technologies, such as machine learning, impose significant challenges on existing security systems. In this paper, we propose a new relay system to achieve physical layer secure transmission and construct a deep learning model on the relay to design secure beamforming vector. This design is able to adapt to the current channel of the legitimate user and resist the eavesdropping from eavesdroppers. The model takes the channel’s statistical characteristic into account and it can learn the channel state information (CSI) to design secure beamforming in order to against eavesdropping effectively. The performance of bit error rate (BER) is close to the Shannon limit when the receiver demodulates the received signals, and we also ensure that the eavesdroppers cannot demodulate the transmitted signals. In addition, we design a power allocation algorithm, which considers the eavesdropper’s CSI on the relay. Simulation results show that the proposed model is able to reach the pre-defined BER requirements. The model can maximize the system security rate by optimizing power allocation at the relay.
Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.
Wireless communication security can be enhanced by leveraging the characteristics of the physical (PHY) layer, where discriminatory scrambling can be employed at the symbol level to either improve the signal quality of the legitimate receiver or degrade that of the eavesdroppers. However, in the presence of multiple passive eavesdroppers with more antennas than the transmitter, the transmitted signals can still be reliably separated from random disturbances. To mitigate this challenge, we propose a two-dimensional vectorized secure transmission scheme. Unlike existing transmission schemes (where the same data symbol is sent over each antenna with a predesigned complex weight at a time), in the proposed scheme, a sequence of data symbols in a predefined order (named symbol vector) is first pre-superposed through pre-coding with a random complex matrix prior to been sent as a vector in parallel over each transmitting antenna at a time. As a result, physical randomness of the legitimate channel is introduced into the received signals at passive eavesdroppers in the pre-coding procedure. Moreover, to ensure that transmitted data symbols can be recovered in the right order, each symbol vector is sent repeatedly, according to the principle of maximum entropy. To ensure the intended receiver can recover the transmitted symbol vector, the random pre-coding matrices are selected such that a linear constraint imposed by the CSI of the legitimate channel is satisfied. In addition, an extended maximum likelihood (ML) detection method is developed for the desired receiver while the random pre-coding matrices are not required to be transmitted. We then analyze its security based on the signal detection theory to demonstrate that the intended receiver can recover the transmitted symbol vectors while the eavesdroppers are not capable of doing so. We also evaluate the performance of the proposed scheme to demonstrate its effectiveness.
The Internet of Things (IoT) is one of the most promising technological revolutions. However, the IoT is inherently vulnerable to attacks. In this paper, we propose to enhance the physical layer security of the IoT by using a technique called information passing and interference addition. In the physical layer security analysis, the achieved secrecy rate has an inverse relationship with the intruder's distance to the legitimate transmitter. Our work is, first, to increase the achievable secrecy rate by letting the legitimate transmitter find an alternative route to the fusion center that could achieve a higher secrecy rate than the direct route. Hence, the legitimate transmitter must not disclose the actual information to the fusion center if there is an eavesdropper located between them, and rather must pass its information to another node via a directional antenna to concentrate the power towards the intended receiving node. Passing the information to the nearest node must happen under the condition that there is no intruder in between. Second, we use simultaneous multi-stream beamforming transmission to strengthen the legitimate receiver's signal-to-noise ratios and at the same time poison the eavesdropper channel with interference. Third, we disclose false information to the intruder. We created the system design and investigated the secrecy analysis of that system. Also, we discussed the use of directional antennas on the legitimate nodes. The result showed that using directional antennas would increase the probability of having at least one secure connection coming out of the node to the other legitimate nodes. Moreover, the results showed that using the simultaneous multi-stream beamforming improved the legitimate channel's achievable secrecy rate and that it has superiority over the directional antenna effect.
The Internet of Things (IoT) is a popular technology that refers to a network of internet-connected physical devices that interact to perform tasks with minimal human intervention. However, as these networks expand, ensuring their security becomes challenging due to the communication broadcasting nature and extensive data exchanges. Traditional cryptographic security methods may not be optimal due to the constrained resources of loT devices. In this study, we propose a novel secure key distribution scheme from a physical layer perspective suitable for an loT environment. The proposed scheme takes advantage of the availability of Channel State Information (CSI) at both ends of the communication to enhance security. Specifically, CSI is utilized to precode the key symbols during the key distribution process. Additionally, the scheme employs the xor operation to add an extra layer of difficulty for potential eavesdroppers that attempt to retrieve the transmitted key symbols. The performance of the proposed scheme is evaluated in terms of Key Error Rate (KER) at legitimate nodes and eavesdroppers by using Monte Carlo simulations.