Abstract We utilize an electromagnetically induced transparency (EIT) of a three-level cascade system involving Rydberg state in a room-temperature cell, formed with a cesium 6S1/2–6P3/2–66S1/2 scheme, to investigate the Autler–Townes (AT) splitting resulting from a 15.21-GHz radio-frequency (RF) field that couples the | 66 S 1 / 2 〉 → | 65 P 1 / 2 〉 Rydberg transition. The radio-frequency electric field induced AT splitting, γ AT, is defined as the peak-to-peak distance of an EIT-AT spectrum. The dependence of AT splitting γ AT on the probe and coupling Rabi frequency, Ωp and Ωc, is investigated. It is found that the EIT-AT splitting strongly depends on the EIT linewidth that is related to the probe and coupling Rabi frequency in a weak RF-field regime. Using a narrow linewidth EIT spectrum would decrease the uncertainty of the RF field measurements. This work provides new experimental evidence for the theoretical framework in [J. Appl. Phys. 121, 233106 (2017)].
Abstract We utilize an electromagnetically induced transparency (EIT) of a three-level cascade system involving Rydberg state in a room-temperature cell, formed with a cesium 6S1/2–6P3/2–66S1/2 scheme, to investigate the Autler–Townes (AT) splitting resulting from a 15.21-GHz radio-frequency (RF) field that couples the | 66 S 1 / 2 〉 → | 65 P 1 / 2 〉 Rydberg transition. The radio-frequency electric field induced AT splitting, γ AT, is defined as the peak-to-peak distance of an EIT-AT spectrum. The dependence of AT splitting γ AT on the probe and coupling Rabi frequency, Ωp and Ωc, is investigated. It is found that the EIT-AT splitting strongly depends on the EIT linewidth that is related to the probe and coupling Rabi frequency in a weak RF-field regime. Using a narrow linewidth EIT spectrum would decrease the uncertainty of the RF field measurements. This work provides new experimental evidence for the theoretical framework in [J. Appl. Phys. 121, 233106 (2017)].
An electromagnetically induced transparency (EIT) of a cascade-three-level atom involving Rydberg level in a room-temperature cell, formed with a cesium 6S 1 / 2-6P 3 / 2-66 S 1 / 2 scheme, is employed to detect the Autler-Townes (AT) splitting resulted with a 15.21-GHz microwave field coupling the 66 S 1 / 2 → 65 P 1 / 2 transition. Microwave field induced AT splitting, f A T, is characterized by the distance of peak-to-peak of an EIT-AT spectrum. The f A T dependence on the microwave Rabi frequency, Ω M W , demonstrates two regions, the strong-coupling linear region, f A T ≈ Ω M W and the weak-coupling nonlinear region, f A T ≲ Ω M W. The f A T dependencies on the probe and coupling Rabi frequency are also investigated. Using small probe- and coupling-laser, the Rabi frequency is found to enlarge the linear regime and decrease the uncertainty of the microwave field measurements. The measurements agree with the calculations based on a four-level atomic model.
Electromagnetically induced transparency (EIT) and Autler–Townes splitting (ATS) are two similar yet distinct phenomena that modify the transmission of a weak probe field through an absorption medium in the presence of a coupling field, featured in a variety of three-level atomic systems. In many applications it is important to distinguish EIT from ATS splitting. We present EIT and ATS spectra in a three-level cascade system, involving cold cesium atoms in the Rydberg state. The EIT linewidth, γ EIT , defined as the full width at half maximum of the transparency window, and the ATS splitting, γ ATS , defined as the peak-to-peak distance between AT absorption peaks, are used to delineate the EIT and ATS regimes and to characterize the transition between the regimes. In the cold-atom medium, in the weak-coupler (EIT) regime γ EIT ≈ A + B ( + , where Ω c and Ω p are the coupler and probe Rabi frequencies, Γ eg is the spontaneous decay rate of the intermediate 6P 3/2 level, and parameters A and B that depend on the laser linewidth. We explore the transition into the strong-coupler (ATS) regime, which is characterized by the relation γ ATS ≈ Ω c . The experiments are in agreement with numerical solutions of the Master equation. Our analysis accounts for non-ideal conditions that exist in typical realizations of Rydberg-EIT, including laser-frequency jitter, Doppler mismatch of the utilized two-color Rydberg EIT system, and strong probe fields. The obtained criteria to distinguish cold-atom EIT from ATS are readily accessible and applicable in practical implementations.
We present an electromagnetically induced transparency and Aulter-Townes (EIT-AT) spectrum of a Rydberg three-level atom that is dressed with a microwave field in a room-temperature cesium cell. The EIT is a quantum coherent effect produced by the interaction of atoms with electromagnetic waves, which leads to the decrease of the absorption for a weak resonant probe laser. AT splitting refers to the phenomenon, that the absorption line splits when an electromagnetic field that is in resonance or near resonance acts on the transition of atoms. Rydberg atoms are extremely sensitive to an external electric field due to their large polarizabilities and microwave transition dipole moments, which can be used to measure the external field. In this work, a Rydberg three-level EIT is used to detect Rydberg atom and AT splitting induced by the microwave field. Cesium levels 6S1/2, 6P3/2 and 50S1/2 constitute a Rydberg three-level system, in which a weak probe laser locking to the transition from 6S1/2 to 6P3/2 couples ground-state transition and the strong coupling laser resonates on the Rydberg transition from 6P2/3 to 50S1/2. The two Rydberg levels 50S1/2 and 50P1/2 are coupled with the microwave field at a frequency of 30.852 GHz, leading to the AT splitting of EIT line and forming an EIT-AT spectrum, which is used to measure the electric field amplitude of microwave. In order to further study the EIT-AT splitting characteristics of the Rydberg levels, we carry out a series of measurements by changing the microwave field. The experimental results show a broadened EIT-AT signal for the weak field range and the four-peak spectrum for the strong field, which is attributed to the inhomogeneity of the microwave field. The microwave in cesium cell, emitted by a function generator, shows inhomogeneous behavior such that the atoms interacting with the laser field experience the different fields, leading to the line broadened and multi-peak EIT-AT spectra. For the microwave transition of nS1/2-nP1/2 in this paper, a pair of EIT-AT lines should be obtained for an electric field value. The broadening of the EIT-AT spectrum and the multi-peak structure here are due to the inhomogeneity of the microwave field measurement. We propose a method to increase the spatial resolution by reducing the length of cesium cell. The result in this work provides a method of measuring the field amplitude and monitoring the distribution of microwave electric field, meanwhile the spatial resolution of the measurements can be improved by reducing the size of the cell.
We investigate the relationship between the Rabi frequency (ΩRF, related to the applied electric field) and Autler-Townes (AT) splitting, when performing atom-based radio-frequency (RF) electric (E) field strength measurements using Rydberg states and electromagnetically induced transparency (EIT) in an atomic vapor. The AT splitting satisfies, under certain conditions, a well-defined linear relationship with the applied RF field amplitude. The EIT/AT-based E-field measurement approach derived from these principles is currently being investigated by several groups around the world as a means to develop a new SI-traceable RF E-field measurement technique. We establish conditions under which the measured AT-splitting is an approximately linear function of the RF electric field. A quantitative description of systematic deviations from the linear relationship is key to exploiting EIT/AT-based atomic-vapor spectroscopy for SI-traceable field measurement. We show that the linear relationship is valid and can be used to determine the E-field strength, with minimal error, as long as the EIT linewidth is small compared to the AT-splitting. We also discuss interesting aspects of the thermal dependence (i.e., hot- versus cold-atom) of this EIT-AT technique. An analysis of the transition from cold- to hot-atom EIT in a Doppler-mismatched cascade system reveals a significant change of the dependence of the EIT linewidth on the optical Rabi frequencies and of the AT-splitting on ΩRF.
Abstract We have systematically investigated the influence of the gas temperature (T), the Rabi frequencies of the probe laser (Ωp), the coupling laser (Ωc) and the radio-frequency (RF) (ΩRF) on the Rydberg electromagnetically induced transparency (EIT) and Autler–Townes (AT) splitting (Δf) by defining a general Doppler mismatch factor D g = ΩRF/Δf in the Rydberg atom-based microwave electrometry. The effect of T on D g is studied in detail from 0 to 1000 K, the results show that D g is insensitive to T when T < 10 μK or T > 10 K, while D g changes significantly with 10 K > T > 10 μ K . Then the effects of Ωp, Ωc and ΩRF on factor D g at T = 300 K (typical room temperature) and T = 10 μK (typical temperature of cold atom by laser cooling) are studied in detail, respectively. The results show that the linewidth of Rydberg EIT (ΓEIT) can be used as a key parameter to characterize the dependence of D g on Ωp and Ωc in both cases. D g is insensitive to T, Ωp and Ωc when ΩRF > 3ΓEIT which means that ΓEIT determines the lower limit of the linear region of the RF electric field strength measured by EIT–AT splitting. More interesting, the range where D g is insensitive to Ωp and Ωc can be greatly expanded by lowering the gas temperature to 10 μK. The ranges of parameters where D g is insensitive to T, Ωp, Ωc and ΩRF are given, and such relationship can be easily scaled to other atomic systems. The results can help the selection of various parameters in the experiments and specific applications to ensure the accuracy of measuring the RF electric field.
Rydberg atoms are highly excited atoms with large principal quantum number n, big sizes (~n2) and long lifetimes (~n3). Rydberg atoms are very sensitive to an external field due to the large polarizabilities of Rydberg atoms (~n7). Electromagnetically induced transparency (EIT) of Rydberg atom provides an ideal method to detect Rydberg atoms without destroying atoms, and can be used to measure the external direct current and radio frequency (RF) field. In this paper, we study the EIT effect of a cesium ladder-type three-level atom involving Rydberg state exposed to a weak RF field. The ground state (6S1/2), the excited state (6P3/2) and Rydberg state (48D5/2) constitute the Rydberg three-level system, in which the probe laser couples 6S1/2(F=4)6P3/2(F'=5) transition, whereas the coupling laser scans across the 6P3/248D5/2 Rydberg transition. The coupling laser (510 nm laser, propagating in the z-axis direction and linear polarization in the y-axis direction) and the probe laser (852 nm laser, linear polarization in the y-axis direction) counter-propagate through a 50-mm-long cesium vapor cell at room temperature, yielding Rydberg EIT spectra. Rydberg EIT signal is detected as a function of the detuning of the coupling laser. When a weak RF (80 MHz) electric field polarized in the x-axis direction is applied to a pair of electrode plates located on both sides of the cesium cell, the EIT spectrum of Rydberg 48D5/2 shows the Stark splitting and the even order harmonic sidebands. The experimental results are analyzed by using the Floquet theory. The simulation results accord well with the experimentally measured results. Furthermore, we also investigate the influence of the self-ionization effect of Rydberg atom on the Stark spectrum by changing the RF frequency. We put forward a proposal to avoid the effect of ionization by placing electrode plates in the cesium cell. In the weak RF-field domain, mj=5/2 Stark line crosses mj=1/2, 3/2 sidebands, these cross points provide an antenna-free method of accurately calibrating the RF electric field based on Rydberg atoms.