Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Tapered atomic cladded nano waveguide for fine control of light-atom interaction

Roy Zektzer, Noa Mazurski, Yefim Barash, Uriel Levy

Published May 5, 2019• 3 citations
Publisher

Abstract

We experimentally demonstrate the chip-scale integration of tapered nano waveguides and rubidium atoms. The optical mode interaction volume with the atoms is controlled by the tapering, giving rise to sub-Doppler atomic features and controlled interactions. © 2019 The Author(s)
DOI
10.23919/cleo.2019.8750649

Related papers

Tapered atomic cladded nano waveguide for fine control of light-atom interaction

Roy Zektzer, Noa Mazurski, Yefim Barash +1 more

We experimentally demonstrate the chip-scale integration of tapered nano waveguides and rubidium atoms. The optical mode interaction volume with the atoms is controlled by the tapering, giving rise to sub-Doppler atomic features and controlled interactions.

Conference on Lasers and Electro-Optics•Jan 1, 2019•1 citation

Chip scale optical pumping using atomic cladded tapered nano waveguides with buffer gas

Roy Zektzer, Eliran Talker, Noa Mazurski +2 more

We experimentally demonstrate chip-scale optical pumping of Rubidium vapor based on novel atomic-cladded tapered nano-waveguides with different buffer-gas pressures. Precise control over the interaction volume and coupling enables the optimization of the atomic polarization.

Conference on Lasers and Electro-Optics•Jan 1, 2021•0 citations

Tapered atomic cladded nano waveguide for improved frequency stabilization

Roy Zektzer, Noa Mazurski, Yefim Barash +1 more

We integrate atoms and nano-waveguides on a chip to demonstrate a chip-scale frequency reference. Novel design and fabrication allows to face challenges related to linewidth, light-shift and frequency instability.

Conference on Lasers and Electro-Optics•Jan 1, 2020•0 citations

Nanoscale light–matter interactions in atomic cladding waveguides

Liron Stern, Boris Desiatov, Ilya Goykhman +1 more

Alkali vapours, such as rubidium, are being used extensively in several important fields of research such as slow and stored light nonlinear optics quantum computation, atomic clocks and magnetometers. Recently, there is a growing effort towards miniaturizing traditional centimetre-size vapour cells. Owing to the significant reduction in device dimensions, light–matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for nonlinear interactions. Here, taking advantage of the mature platform of silicon photonics, we construct an efficient and flexible platform for tailored light–vapour interactions on a chip. Specifically, we demonstrate light–matter interactions in an atomic cladding waveguide, consisting of a silicon nitride nano-waveguide core with a rubidium vapour cladding. We observe the efficient interaction of the electromagnetic guided mode with the rubidium cladding and show that due to the high confinement of the optical mode, the rubidium absorption saturates at powers in the nanowatt regime. Alkali vapours are increasingly useful in photonic research and metrology applications, and they provide a useful test bed for investigating light–matter interaction. Stern et al. integrate silicon nitride waveguides with alkali vapours to study light–matter interactions on a chip-scale platform.

arXiv:1204.0393•Nature Communications•Mar 5, 2013•157 citations

Observing electromagnetically induced transparency using tapered atomic cladded nanowaveguides in hot atomic vapor

Ilan Sher, Benyamin Shnirman, Arieh Grosman +6 more

Electromagnetically induced transparency (EIT) enables an otherwise opaque medium to become transparent and can dramatically slow or even temporarily store light pulses within the medium. It provides a robust platform for manipulating and preserving quantum optical signals, making it a powerful tool for quantum information processing and precision sensing. In this work, we demonstrate EIT on a fully integrated, chip-scale platform based on nanoscale atomic suspended waveguides (NASWAGs) surrounded by hot rubidium vapor. These structures provide submillimeter-scale interaction lengths and feature a tapered geometry that extends the optical mode into the surrounding vapor, increasing the atom-light interaction volume and reducing transit-time broadening. Combined with the strong spatial confinement of both probe and control beams, this enables efficient EIT with only a few microwatts of control power. This represents a significant advance over standard nanophotonic platforms, where weak evanescent fields and short interaction times have previously prevented the observation of EIT.

Optica•Jan 30, 2026•3 citations

Atom–Photon Interactions in Atomic Cladded Waveguides: Bridging Atomic and Telecom Technologies

Roy Zektzer, Eliran Talker, Yefim Barash +3 more

Accurate and stable frequency sources can be realized by locking lasers to well-known transitions between energy levels in isolated quantum systems such as alkali atoms. Unfortunately, current implementations of such frequency standards typically involve bulky optical setups and discrete optical components. Furthermore, the common transitions of alkali atoms are in the near-infrared, hindering their use as frequency references in the telecom regime. Our current work is focused on mitigating these deficiencies. In particular, we demonstrate the design, fabrication, and experimental characterization of an on-chip telecom frequency reference that is based on a ladder transition of rubidium atoms integrated with nanoscale optical waveguides. These atomic cladded waveguides are implemented in a serpentine geometry in order to optimize the chip area and maximize the interaction of light with the alkali atoms. Following its fabrication, the device is used to stabilize a telecom laser around a 1.5 μm wavelength to a precision better than 200 kHz at ∼250 s. Moreover, in spite of the fact that the natural lifetime of the excited state of the atom corresponding to only a few megahertz line widths, the nanoscale confinement of the optical mode dictates ultrashort interaction times and extreme photonic energy densities allowing us to demonstrate low power and faster (∼200 MHz) all-optical modulation of a near-infrared light with a telecom light. The results presented in this paper push forward the efforts toward fully integrated chip-scale stabilization system and provide an extremely efficient link between atomic based devices and silicon photonics platform in the telecom.

ACS Photonics•Feb 26, 2021•16 citations
Alkali vapours, such as rubidium, are being used extensively in several important fields of research such as slow and stored light nonlinear optics quantum computation, atomic clocks and magnetometers. Recently, there is a growing effort towards miniaturizing traditional centimetre-size vapour cells. Owing to the significant reduction in device dimensions, light–matter interactions are greatly enhanced, enabling new functionalities due to the low power threshold needed for nonlinear interactions. Here, taking advantage of the mature platform of silicon photonics, we construct an efficient and flexible platform for tailored light–vapour interactions on a chip. Specifically, we demonstrate light–matter interactions in an atomic cladding waveguide, consisting of a silicon nitride nano-waveguide core with a rubidium vapour cladding. We observe the efficient interaction of the electromagnetic guided mode with the rubidium cladding and show that due to the high confinement of the optical mode, the rubidium absorption saturates at powers in the nanowatt regime. Alkali vapours are increasingly useful in photonic research and metrology applications, and they provide a useful test bed for investigating light–matter interaction. Stern et al. integrate silicon nitride waveguides with alkali vapours to study light–matter interactions on a chip-scale platform.
Electromagnetically induced transparency (EIT) enables an otherwise opaque medium to become transparent and can dramatically slow or even temporarily store light pulses within the medium. It provides a robust platform for manipulating and preserving quantum optical signals, making it a powerful tool for quantum information processing and precision sensing. In this work, we demonstrate EIT on a fully integrated, chip-scale platform based on nanoscale atomic suspended waveguides (NASWAGs) surrounded by hot rubidium vapor. These structures provide submillimeter-scale interaction lengths and feature a tapered geometry that extends the optical mode into the surrounding vapor, increasing the atom-light interaction volume and reducing transit-time broadening. Combined with the strong spatial confinement of both probe and control beams, this enables efficient EIT with only a few microwatts of control power. This represents a significant advance over standard nanophotonic platforms, where weak evanescent fields and short interaction times have previously prevented the observation of EIT.
Accurate and stable frequency sources can be realized by locking lasers to well-known transitions between energy levels in isolated quantum systems such as alkali atoms. Unfortunately, current implementations of such frequency standards typically involve bulky optical setups and discrete optical components. Furthermore, the common transitions of alkali atoms are in the near-infrared, hindering their use as frequency references in the telecom regime. Our current work is focused on mitigating these deficiencies. In particular, we demonstrate the design, fabrication, and experimental characterization of an on-chip telecom frequency reference that is based on a ladder transition of rubidium atoms integrated with nanoscale optical waveguides. These atomic cladded waveguides are implemented in a serpentine geometry in order to optimize the chip area and maximize the interaction of light with the alkali atoms. Following its fabrication, the device is used to stabilize a telecom laser around a 1.5 μm wavelength to a precision better than 200 kHz at ∼250 s. Moreover, in spite of the fact that the natural lifetime of the excited state of the atom corresponding to only a few megahertz line widths, the nanoscale confinement of the optical mode dictates ultrashort interaction times and extreme photonic energy densities allowing us to demonstrate low power and faster (∼200 MHz) all-optical modulation of a near-infrared light with a telecom light. The results presented in this paper push forward the efforts toward fully integrated chip-scale stabilization system and provide an extremely efficient link between atomic based devices and silicon photonics platform in the telecom.