We invoke an efficient search algorithms as a key challenge in multi-qubit quantum systems. An original algorithm called dynamical quantum search algorithm from which Grover algorithm is obtained at a specified time is presented. This algorithm is distinguished by accuracy in obtaining high probability of finding any marked state in a shorter time than Grover algorithm time. The algorithm performance can be improved with respect to the different values of the controlled phase. A new technique is used to generate the dynamical quantum gates in the presence of dissipation effect that helps in implementing the current algorithm.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
We calculate for the current-biased Josephson junction the decoherence of the qubit state from noise and dissipation. The effect of dissipation can be entirely accounted for through a semiclassical noise model that appropriately includes the effect of zero-point and thermal fluctuations from dissipation. The magnitude and frequency dependence of this dissipation can be fully evaluated with this model to obtain design constraints for small decoherence. We also calculate decoherence from spin echo and Rabi control sequences and show they are much less sensitive to low-frequency noise than for a Ramsey sequence. We predict small decoherence rates from
1/f noise of charge, critical current, and flux based on noise measurements in prior experiments. Our results indicate this system is a good candidate for a solid-state quantum computer.
Quantum computing has drawn enormous attention in physics community in both scientific and technological perspectives. Among several promising architectures for quantum computer are superconducting qubits based on Josephson junctions. Over the last few decades, there has been a dramatic improvement on the coherence time by a few orders of magnitude from a few nanoseconds to about a hundred microsecond. Such improvements were possible due to the elimination or suppression of various decoherence sources. Thus, it is critical to investigate the origin of such decoherence to extend our understanding and practically improve the coherence time. For example, Abrikosov vortices knowingly could be one of the decoherence source, and yet the quantitative research on the interaction of a superconducting qubit with such vortices has been lacking. We present a new type of transmon split-junction qubit which can be tuned by Meissner screening currents in the adjacent superconducting film electrodes. The qubits were measured using a 3D microwave cavity in the dispersive regime at the base temperature 45 mK. The measurement protocols were based on the circuit quantum electrodynamics (cQED) architecture and so-called high-power measurement. The achieved period of oscillation with magnetic field was much smaller than in usual SQUID-based transmon qubits, thus a strong effective field amplification has been realized. The best measured relaxation time was of the order of 50 μs and the dephasing time about 40 μs. This Meissner qubit allows an efficient coupling to superconducting vortices, which were induced by external applied magnetic field. We intend to present a quantitative analysis of the radiation-free energy relaxation in the qubits coupled to the Abrikosov vortices. The estimated relaxation rate combined with vortex counting process provided a good agreement with the experimental results. Also, the observation of coherent quantum oscillations provides strong evidence that vortices can exist in coherent quantum superposition of different position states. According to our suggested model, the wave function collapse is defined by Caldeira-Leggett dissipation associated with viscous motion of the vortex cores.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an
Al/AlOx/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of
ω01=5.0122 GHz and an anharmonicity of
α/2π=−202.4 MHz , corresponding to
EJ/EC≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of
g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of
QL=6127 and a Purcell limit of
T1Purcell≈82 μs . Time-domain measurements yield coherence times of
T1=17.4 μs and
T2∗=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
Transmon qubits experience open-system effects that manifest as noise at a broad range of frequencies. We present a model of these effects using the Redfield master equation with a hybrid bath consisting of low- and high-frequency components. We use two-level fluctuators to simulate 1/f -like noise behavior, which is a dominant source of decoherence for superconducting qubits. By measuring quantum state fidelity under free evolution with and without dynamical decoupling (DD), we can fit the low- and high-frequency noise parameters in our model. We train and test our model using experiments on quantum devices available through IBM quantum experience. Our model accurately predicts the fidelity decay of random initial states, including the effect of DD pulse sequences. We compare our model with two simpler models and confirm the importance of including both high frequency and 1/f noise in order to accurately predict transmon behavior. Published by the American Physical Society 2024