Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Theoretical analysis and experimental design of dual-beam optical trap for large particles

St. John, Demi Rose

Published Jan 1, 2018• 1 citation
OpenAlex

Abstract

Ultra-high sensitivity acceleration and gryometric sensors have been proposed as optically levitated particles in ultra-high vacuum (UHV). Larger particles (10- 30 microns in diameter) provide higher sensitivity, but they are difficult to trap in UHV without particle loss. To overcome the radiometric forces that lead to particle loss, rare earth (RE) ion dopants can be incorporated into the particles to enable solid-state laser cooling of the particles internal temperature. This thesis theoretically and experimentally explores development of optical traps designed for trapping and internally laser cooling large particles. The analysis focuses on dual-beam horizontal traps and the development of code to analyze dual-beam trap potentials and particle loading dynamics. Tolerance analysis, improved particle loader designs, and monitoring and automation of the loading process are investigated. The thesis provides a road map for achieving efficient optical trapping, cooling, and control of large particles.

Related papers

An apparatus for in-vacuum loading of nanoparticles into an optical trap

Evan Weisman, Chethn Galla, Cris Montoya +7 more

We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.

arXiv:2208.02102•Review of Scientific Instruments•Nov 1, 2022•15 citations

Hybrid electro-optical trap for experiments with levitated particles in vacuum

Dmitry S. Bykov, Maximilian Meusburger, Lorenzo Dania +1 more

We confine a microparticle in a hybrid potential created by a Paul trap and a dual-beam optical trap. We transfer the particle between the Paul trap and the optical trap at different pressures and study the influence of feedback cooling on the transfer process. This technique provides a path for experiments with optically levitated particles in ultra-high vacuum and in potentials with complex structures.

arXiv:2204.04912•Review of Scientific Instruments•Jul 1, 2022•22 citations

Integrated atomic quantum technologies in demanding environments: development and qualification of miniaturized optical setups and integration technologies for UHV and space operation

Marc Christ, Alexander Kassner, Robert Smol +6 more

Employing compact quantum sensors in field or in space (e.g., small satellites) implies demanding requirements on components and integration technologies. Within our work on integrated sensors, we develop miniaturized, ultra-stable optical setups for optical cooling and trapping of cold atomic gases. Besides challenging demands on alignment precision, and thermo-mechanical durability, we specifically address ultra-high vacuum (UHV) compatibility of our integration technologies and optical components. A prototype design of an UHV-compatible, crossed beam optical dipole trap setup and its application within a cold atomic quantum sensor is described. First qualification efforts on adhesive micro-integration technologies are presented. These tests are conducted in application-relevant geometries and material combinations common for micro-integrated optical setups. Adhesive aging will be investigated by thermal cycling or gamma radiation exposure. For vacuum compatibility testing, a versatile UHV testing system is currently being set up, enabling residual gas analysis and measurement of total gas rates down to 5•10-10mbar l/s at a base pressure of 10-11 mbar, exceeding the common ASTM E595 test.

International Conference on Space Optics (ICSO)•Jul 12, 2019•1 citation

Development of an ultrahigh vacuum system for ultracold atoms in space

M. Warner, Mareen Laura Czech, Jens Große

The realization of high-precision quantum sensors based on cold atoms in space demands exceptional environmental control, particularly in maintaining ultra-high vacuum (UHV) conditions. We present the development of a quantum sensor for cold atom interferometry, with a focus on the design and performance of its UHV system. The sensor is designed for operation in microgravity environments, enabling long interrogation times and enhanced sensitivity for applications in fundamental physics, geodesy, and inertial navigation. One focus of this contribution is the setup and qualification of the optical windows, enabling UHV sealing and transmission of all needed laser frequencies, while fulfilling the optical requirements.

Photonics for Quantum (PfQ)•Jun 8, 2026•0 citations

Hollow-core fiber loading of nanoparticles into ultra-high vacuum

Stefan Lindner, Paul Juschitz, Jakob Rieser +5 more

Many experiments in the field of optical levitation with nanoparticles today are limited by the available technologies for particle loading. Here, we introduce a particle loading method that solves the main challenges, namely deterministic positioning of the particles and clean delivery at ultra-high vacuum levels as required for quantum experiments. We demonstrate the efficient loading, positioning, and repositioning of nanoparticles in the range of 100–755 nm diameter into different lattice sites of a standing wave optical trap, as well as direct loading of 143–365 nm diameter particles into ultra-high vacuum, down to an unprecedented pressure below 10−9 mbar. Our method relies on the transport of nanoparticles within a hollow-core photonic crystal fiber using an optical conveyor belt, which can be precisely positioned with respect to the target trap. Our work opens the path for increasing nanoparticle numbers in the study of multiparticle dynamics and high turn-around times for exploiting the quantum regime of levitated solids in ultra-high vacuum.

arXiv:2311.13920•Applied Physics Letters•Apr 1, 2024•21 citations

Laser Cooling and Trapping of Rare-Earth-Doped Particles

Galina A. Nemova

This review focuses on optical refrigeration with the anti-Stokes fluorescence of rare-earth (RE)-doped low-phonon micro- and nanocrystals. Contrary to bulk samples, where the thermal energy is contained in internal vibrational modes (phonons), the thermal energy of nanoparticles is contained in both the translational motion and internal vibrational (phonons) modes of the sample. Much theoretical and experimental research is currently devoted to the laser cooling of nanoparticles. In the majority of the related work, only the translational energy of the particles has been suppressed. In this review, the latest achievements in hybrid optical refrigeration of RE-doped low-phonon micro- and nanoparticles are presented. Hybrid cooling permits the suppression of not only the translational energy of the RE-doped particles, but also their internal vibrational phonon thermal energy. Laser cooling of nanoparticles is not a simple task. Mie resonances can be used to enhance laser cooling with the anti-Stokes fluorescence of nanoparticles made of low-phonon RE-doped solids. Laser-cooled nanoparticles is a promising tool for fundamental quantum-mechanical studies, nonequilibrium thermodynamics, and precision measurements of forces.

Applied Sciences•Apr 8, 2022•5 citations
Ultra-high sensitivity acceleration and gryometric sensors have been proposed as optically levitated particles in ultra-high vacuum (UHV). Larger particles (10- 30 microns in diameter) provide higher sensitivity, but they are difficult to trap in UHV without particle loss. To overcome the radiometric forces that lead to particle loss, rare earth (RE) ion dopants can be incorporated into the particles to enable solid-state laser cooling of the particles internal temperature. This thesis theoretically and experimentally explores development of optical traps designed for trapping and internally laser cooling large particles. The analysis focuses on dual-beam horizontal traps and the development of code to analyze dual-beam trap potentials and particle loading dynamics. Tolerance analysis, improved particle loader designs, and monitoring and automation of the loading process are investigated. The thesis provides a road map for achieving efficient optical trapping, cooling, and control of large particles.
We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.
Employing compact quantum sensors in field or in space (e.g., small satellites) implies demanding requirements on components and integration technologies. Within our work on integrated sensors, we develop miniaturized, ultra-stable optical setups for optical cooling and trapping of cold atomic gases. Besides challenging demands on alignment precision, and thermo-mechanical durability, we specifically address ultra-high vacuum (UHV) compatibility of our integration technologies and optical components. A prototype design of an UHV-compatible, crossed beam optical dipole trap setup and its application within a cold atomic quantum sensor is described. First qualification efforts on adhesive micro-integration technologies are presented. These tests are conducted in application-relevant geometries and material combinations common for micro-integrated optical setups. Adhesive aging will be investigated by thermal cycling or gamma radiation exposure. For vacuum compatibility testing, a versatile UHV testing system is currently being set up, enabling residual gas analysis and measurement of total gas rates down to 5•10-10mbar l/s at a base pressure of 10-11 mbar, exceeding the common ASTM E595 test.
The realization of high-precision quantum sensors based on cold atoms in space demands exceptional environmental control, particularly in maintaining ultra-high vacuum (UHV) conditions. We present the development of a quantum sensor for cold atom interferometry, with a focus on the design and performance of its UHV system. The sensor is designed for operation in microgravity environments, enabling long interrogation times and enhanced sensitivity for applications in fundamental physics, geodesy, and inertial navigation. One focus of this contribution is the setup and qualification of the optical windows, enabling UHV sealing and transmission of all needed laser frequencies, while fulfilling the optical requirements.
Many experiments in the field of optical levitation with nanoparticles today are limited by the available technologies for particle loading. Here, we introduce a particle loading method that solves the main challenges, namely deterministic positioning of the particles and clean delivery at ultra-high vacuum levels as required for quantum experiments. We demonstrate the efficient loading, positioning, and repositioning of nanoparticles in the range of 100–755 nm diameter into different lattice sites of a standing wave optical trap, as well as direct loading of 143–365 nm diameter particles into ultra-high vacuum, down to an unprecedented pressure below 10−9 mbar. Our method relies on the transport of nanoparticles within a hollow-core photonic crystal fiber using an optical conveyor belt, which can be precisely positioned with respect to the target trap. Our work opens the path for increasing nanoparticle numbers in the study of multiparticle dynamics and high turn-around times for exploiting the quantum regime of levitated solids in ultra-high vacuum.
This review focuses on optical refrigeration with the anti-Stokes fluorescence of rare-earth (RE)-doped low-phonon micro- and nanocrystals. Contrary to bulk samples, where the thermal energy is contained in internal vibrational modes (phonons), the thermal energy of nanoparticles is contained in both the translational motion and internal vibrational (phonons) modes of the sample. Much theoretical and experimental research is currently devoted to the laser cooling of nanoparticles. In the majority of the related work, only the translational energy of the particles has been suppressed. In this review, the latest achievements in hybrid optical refrigeration of RE-doped low-phonon micro- and nanoparticles are presented. Hybrid cooling permits the suppression of not only the translational energy of the RE-doped particles, but also their internal vibrational phonon thermal energy. Laser cooling of nanoparticles is not a simple task. Mie resonances can be used to enhance laser cooling with the anti-Stokes fluorescence of nanoparticles made of low-phonon RE-doped solids. Laser-cooled nanoparticles is a promising tool for fundamental quantum-mechanical studies, nonequilibrium thermodynamics, and precision measurements of forces.