Fast qubit reset of a low frequency fluxonium circuit

Timm Mörstedt, Giacomo Catto, A.J. Viitanen +13 more

Riccardo Borgani, Mats O. Tholén, Shan W. Jolin +2 more

Helin Zhang

Guo Xuan Chan, Wangwei Lan, Tenghui Wang +3 more

Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.

Helin Zhang, Srivatsan Chakram, Tanay Roy +6 more

The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.

Nicholas A. Masluk, Archana Kamal, Vladimir Manucharyan +3 more