Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Realization of two-qubit gates with tunable couplers in superconducting circuits

Michele C. Collodo, J. Herrmann, Ants Remm, Jean-Claude Besse, Christian Kraglund Andersen, Sebastian Krinner, Andreas J. Wallraff, Christopher Eichler

Published Mar 6, 2019• 0 citations
OpenAlex

Related papers

Characterization of tunable coupler without a dedicated readout resonator in superconducting circuits

Chi Zhang, Tian-Le Wang, Liang-Liang Guo +6 more

Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.

Applied Physics Letters•Jan 9, 2023•11 citations

Realization of two-qubit gates operations in asymmetric superconducting circuits

Tao Zhang, Chao Zhao

Indian Journal of Physics•Apr 24, 2025•1 citation

Superconducting qubits with adjustable coupling, Part II: Fast two-qubit gates

Charles Neill, Yu Chen, P. Roushan +17 more

Bulletin of the American Physical Society•Mar 3, 2014•0 citations

Modular superconducting-qubit architecture with a multichip tunable coupler

Mark Field, Angela Q. Chen, Ben Scharmann +7 more

We use a floating tunable coupler to mediate interactions between qubits on separate chips to build a modular architecture. We demonstrate three different designs of multichip tunable couplers using vacuum-gap capacitors or superconducting indium-bump bonds to connect the coupler to a microwave line on a common substrate and then connect to the qubit on the next chip. We show that the zero-coupling condition between qubits on separate chips can be achieved in each design and that the relaxation rates for the coupler and qubits are not noticeably affected by the extra circuit elements. Finally, we demonstrate two-qubit gate operations with fidelity at the same level as qubits with a tunable coupler on a single chip. Using one or more indium bonds does not degrade qubit coherence or impact the performance of two-qubit gates.

arXiv:2308.09240•Physical Review Applied•May 30, 2024•28 citations

Tunable inter-qubit coupling as a resource for gate based quantum computing with superconducting circuits

B. Chiaro, C. Neill, Z. Chen +5 more

Bulletin of the American Physical Society•Mar 15, 2017•0 citations

Tunable Coupler for Realizing a Controlled-Phase Gate with Dynamically Decoupled Regime in a Superconducting Circuit

X. Li, T. Cai, H. Yan +13 more

Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.

arXiv:1912.10721•Physical Review Applied•Aug 25, 2020•117 citations
Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
We use a floating tunable coupler to mediate interactions between qubits on separate chips to build a modular architecture. We demonstrate three different designs of multichip tunable couplers using vacuum-gap capacitors or superconducting indium-bump bonds to connect the coupler to a microwave line on a common substrate and then connect to the qubit on the next chip. We show that the zero-coupling condition between qubits on separate chips can be achieved in each design and that the relaxation rates for the coupler and qubits are not noticeably affected by the extra circuit elements. Finally, we demonstrate two-qubit gate operations with fidelity at the same level as qubits with a tunable coupler on a single chip. Using one or more indium bonds does not degrade qubit coherence or impact the performance of two-qubit gates.
Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.