IEEE Transactions on Applied Superconductivity

Current Recycling: New Results

Vasili K. Semenov, Yuri A. Polyakov

Published Mar 18, 2019• 15 citations

Abstract

Long ago, current recycling or serial biasing technique was recognized as a promising solution for the reduction of bias current in VLSI dc biased digital superconductor circuits. Despite a significant number of declarations, not so many successful experiments have been reported so far. In the paper we discuss our recent experiments with serially biased 16-bit counter-flow RSFQ shift registers, connected by special interfaces that are able to transfer SFQ pulses between the galvanically isolated driver and receiver. The required functionality is achieved using a superconductor transformer with isolated input and output coils. The known drawback of such interfaces is their parasitic sensitivity to magnetic fields induced by remote currents. To depress this sensitivity we have implemented a special superconductor guard that uses six superconductor layers. We have achieved stable operations of such registers with 16 current recycling stacks. The circuits have been fabricated at MIT Lincoln Laboratory.

DOI: 10.1109/tasc.2019.2904961

Related papers

Current recycling and SFQ signal transfer in large scale RSFQ circuits

H. Kang, Steven B. Kaplan

The practical implementation of RSFQ technology in most digital electronics application areas requires much more complexity than the presently developed circuits. There are two important issues in building large-scale RSFQ circuits: 1) the recycling of the bias currents and 2) the transfer of SFQ pulses between circuits located far apart. RSFQ circuits are well known to operate with DC current bias. Even though the DC current biasing is more forgiving than the problematic AC biasing, it can still be a big concern when the circuit size becomes large. Dramatic reduction of the total bias current can be achieved by biasing several RSFQ circuits in series, where each circuit is positioned on a separate ground plane. In this work, we have used magnetically coupled Josephson transmission lines as inputs and outputs of an isolated shift register to show the feasibility of using the concept of serial biasing in current recycling. The circuit was simulated, fabricated with Nb technology, and tested at a temperature of 4.2 K. Test results show that SFQ pulses were transferred into the shift register built on a separate ground plane, clocked through it, and sent out back to the circuit on the original ground plane. We also studied on how to transfer SFQ pulses over an extended length, an important issue in building large RSFQ circuits. We have designed the circuits to test our microstrip line and multichip module approaches. We designed, optimized, fabricated and tested the circuits. Test results show that SFQ pulses can be successfully transmitted over an extensive distance in a chip and between chips.

IEEE Transactions on Applied SuperconductivityJun 1, 200358 citations

Pulse Interfaces and Current Management Techniques for Serially Biased RSFQ Circuits

Ashish Shukla, Dmitri E. Kirichenko, Timur V. Filippov +4 more

As digital superconductor circuits based on Rapid Single Flux Quantum (RSFQ) logic scale up in complexity, so does the total current required to provide dc bias. Serial biasing (SB) is a promising solution that can be used to reduce the current by placing identical digital blocks on islands with isolated grounds and bias them sequentially. There are typically two implementations that are essential for the SB approach: the design of a driver-receiver pair (DRP) for inter-island pulse transport and the current management technique to handle the bias current flowing into and out of an island. While a DRP with good fidelity is essential for any serially biased circuit, the current management becomes critical for designs with relatively large bias current. In this paper, we address the latter. First, we propose a grapevine biasing scheme for serial bias current management. Second, we implement the technique using two exemplar circuits: the parallel counter and the digital decimation filter. We report the low and high speed test results up to 50 GHz for both circuits fabricated at MIT-LL in the SFQ5ee 10 kA/2 Ω fab node.

IEEE Transactions on Applied SuperconductivityJan 13, 20229 citations

Current Recycling in Heterogeneous RSFQ Circuits

Tejumadejesu Oluwadamilare, Eby G. Friedman

As single flux quantum (SFQ) circuit complexities scale, larger bias currents are required. The large current produces excessive heat and greatly complicates the design process. Current recycling offers a solution by reducing the required bias current through serially biased circuit blocks. Serial biasing is typically achieved in homogeneous SFQ systems where similar bias currents are required in similar circuits. Each of these homogeneous circuits is often placed on different ground planes and serially biased to reuse the bias currents. To address heterogeneous circuits with varying bias current requirements, a novel serial biasing technique is proposed. An interface between the ground planes with unequal bias current is presented that exhibits a current balancing capability. The interface supplies additional current before passing the current to the next ground plane. The ground planes are arranged in ascending order of bias current to manage the complexity of these heterogeneous circuits. Using a one bit SFQ full adder as an example, the proposed approach demonstrates several key benefits: a 49% reduction in the number of driver-receiver pairs, a 6.5% reduction in power dissipation, and a 35% reduction in bias current across a heterogeneous SFQ circuit placed on three isolated ground planes. The performance, bias current margins, and methods for current reduction are also discussed, showcasing the effectiveness of current recycling in improving the efficiency of complex heterogeneous SFQ systems.

IEEE Transactions on Applied SuperconductivityJan 16, 20252 citations

SFQ Pulse Transfer Circuits Using Inductive Coupling for Current Recycling

M. Igarashi, Yuki Yamanashi, Nobuyuki Yoshikawa +2 more

An increase in bias currents supplied to single-flux-quantum (SFQ) circuits is a rising problem in building large-scale integrated SFQ circuits, because the magnetic fields generated by bias currents and ground return currents affect the circuit operation. Current recycling technique, which can drastically reduce the total bias current of SFQ circuits, is expected to be a very effective solution for large-scale SFQ circuits. To realize the current recycling technique, signal transmission between SFQ logic circuits located on different ground planes is required. Two types of inductively coupled pulse transfer circuits were examined in this study. One is composed of a simple JTL driver and a DC-SQUID receiver whose junctions are slightly under-damped to enhance the magnetic sensitivity of the SQUID. The other circuit is composed of an SFQ driver based on a delay flip-flop (DFF) and a SQUID receiver. The advantage of the DFF-based circuit is that the coupling time between the driver and the receiver can be increased to ensure appropriate switching in the receiver junction. Two types of transfer circuits were implemented using the SRL 2.5 kA/cm2Nb process and their correct operation was experimentally confirmed. Circuit structures for effective coupling of the SFQ pulse transfer were also investigated. It was shown that a ground plane boundary should be separated from a ground plane hole underneath coupling inductors to obtain high coupling factors.

IEEE Transactions on Applied SuperconductivityJun 1, 200916 citations

SFQ Bias for SFQ Digital Circuits

Vasili K. Semenov, Evan B. Golden, Sergey K. Tolpygo

Superconductor electronics fabrication technology developed at MIT Lincoln Laboratory enables the development of VLSI digital circuits with millions of Josephson junctions per square centimeter. However, conventional DC and multi-phase AC biasing techniques already encounter serious challenges for scaling circuits above several hundred thousand junctions. In this work, we propose a novel AC-based biasing scheme for RSFQ-type logic families requiring DC bias. The major step toward this scheme is a superconducting AC/DC rectifier which we introduced at ASC 2014. We proposed to connect the rectifiers to “payload cells” via superconducting inductors with large inductance in order to reduce parasitic effects of flux quantization. Recently, we discovered that this powering scheme works even better at a much lower value of the inductance, when it is just sufficient to hold only one or two flux quanta in the inductive loop between the converter and the payload. In this case, flux quantization in the loop becomes beneficial because the value of current fed into the payload is defined by the value of the coupling inductance. Therefore, our AC/SFQ converter powers the payload cell by single flux quanta rather than by DC current. Such mode of operation is extremely energy efficient because energy is used only to recover the flux quantum consumed by the cell during the logic operation. We present designs of AC/SFQ converters comprising an AC/DC rectifier and a current conditioning circuit which we termed an SFQ filter. We also present test results and demonstrate AC/SFQ powering a payload circuit using circuits fabricated in a new, 150-nm node of Lincoln Laboratory fabrication technology using self-shunted Nb/AlOx-Al/Nb Josephson junctions with 600 μA/μm2critical current density and 200 nm minimum linewidth of inductors.

arXiv:2012.12405IEEE Transactions on Applied SuperconductivityMar 18, 202114 citations

Serial Biasing Technique for Electronic Design Automation in RSFQ Circuits

Ashish Shukla, Timur V. Filippov, Dmitri E. Kirichenko +4 more

There has been renewed interest and efforts in increasing the complexity of superconductor circuits by means of electronic design automation (EDA). Serial biasing (SB) is a technique that reduces the total dc bias current required by large rapid single flux quantum (RSFQ) circuits, including its energy-efficient variant, ERSFQ. We believe SB needs to be incorporated in any EDA flow for large circuits. In SB, equally biased circuit blocks are placed on galvanically isolated islands and biased in series. SFQ pulses are transferred between islands by means of driver-receiver pairs (DRPs). The special current management technique, called the grapevine (GV) approach and introduced earlier, is used to handle the bias current flowing in and out of an island. In this article, we present all required layout primitives needed to implement SB for the IARPA-led SuperTools cell library that targets the SFQ5ee fab node at MIT Lincoln Laboratory. We discuss the horizontal and vertical composite driver-receiver pairs that comprise not only DRPs but also transmitters and receivers for passive transmission lines. We present the basic blocks to implement the GV managing technique for current injection and extraction. As a proof of concept, we designed a four-island test circuit that comprises all discussed layout primitives and employs an on-chip pseudorandom binary sequence generator as a test pattern source. The test circuit worked up to 50 GHz at the BER level of 10−12. We discuss future steps to improve the SB technique.

IEEE Transactions on Applied SuperconductivityOct 14, 20224 citations