Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Express

High-efficiency generation of a low-noise laser at 447 nm

Xiaojie Zuo, Zhihui Yan, Xiaojun Jia

Published Feb 25, 2019• 7 citations
Publisher

Abstract

We experimentally present a high-efficiency generation of low-noise 447 nm laser by frequency doubling of a Ti:sapphire laser in an external ring cavity with a PPKTP crystal. The maximum blue laser power of 308 mW has been obtained and the corresponding conversion efficiency can reach 70%, when 440 mW infrared laser is injected. Moreover, the noise of the resulting blue laser can reach the quantum noise limit when the analyzing frequency is above 1.5 MHz. Our system provides an ideal pump field for an optical parametric amplifier for the generation of non-classical states of light matching matter absorption line.

DOI
10.7567/1882-0786/aafed8

Related papers

High-efficiency frequency doubling of continuous-wave laser light

Ast, S., Nia, R., Schönbeck, A. +6 more

We report on the observation of high efficiency frequency doubling of 1550 nm continuous-wave laser light in a nonlinear cavity containing a periodically poled potassium titanyl phosphate crystal (PPKTP). The fundamental field had a power of 1.10 W and was converted into 1.05 W at 775 nm, yielding a total external conversion efficiency of (95 \\pm 1)%. The latter value is based on the measured depletion of the fundamental field being consistent with the absolute values derived from numerical simulations. According to our model, the conversion efficiency achieved was limited by the non-perfect mode-matching into the nonlinear cavity and the pump power available. Our result shows that cavity-assisted frequency conversion based on PPKTP is well suited for low-decoherence frequency conversion of quantum states of light.

•Jan 1, 2011•31 citations

High-efficiency frequency doubling of continuous-wave laser light

Stefan Ast, Ramon Moghadas Nia, Axel Schönbeck +6 more

We report on the observation of high-efficiency frequency doubling of 1550 nm continuous-wave laser light in a nonlinear cavity containing a periodically poled potassium titanyl phosphate crystal (PPKTP). The fundamental field had a power of 1.10 W and was converted into 1.05 W at 775 nm, yielding a total external conversion efficiency of 95±1%. The latter value is based on the measured depletion of the fundamental field being consistent with the absolute values derived from numerical simulations. According to our model, the conversion efficiency achieved was limited by the nonperfect mode matching into the nonlinear cavity and by the nonperfect impedance matching for the maximum input power available. Our result shows that cavity-assisted frequency conversion based on PPKTP is well suited for low-decoherence frequency conversion of quantum states of light.

arXiv:1105.5909•Optics Letters•Aug 31, 2011•56 citations

Generation of two-mode bright squeezed light using a noise-suppressed amplified diode laser

Yun Zhang, Kazuhiro Hayasaka, Katsuyuki Kasai

We present the generation of nonclassical state using an amplified diode laser as a light source. The intensity noise of an amplified diode laser was significantly suppressed and reached the shot noise limit at 15 MHz using both a filter cavity and resonant optical feedback. Frequency doubling efficiency of 66% and up to 120 mW output power of green has been achieved in cw second-harmonic generation from 1080 nm to 540 nm. Bright two-mode amplitude-squeezed state was generated from a type-II nondegenerate optical parametric amplifier pumped by generated green light. The measured noise reduction is 2.1+/-0.2 dB below the shot-noise level.

Optics Express•Jan 1, 2006•7 citations

High-efficiency blue-light generation by frequency doubling of picosecond pulses in a thick KNbO_3 crystal

Yong-qing Li, Dorel Guzun, Greg J. Salamo +1 more

We report an experimental demonstration of highly efficient single-pass second-harmonic generation from 859 nm to 429.5 nm with picosecond pulses in a thick KNbO3 crystal. Both the conversion-efficiency and quantum-noise properties of the generated blue pulses are measured at various pump intensities under a strong focusing condition. We find that the variation of the conversion efficiency of the picosecond second-harmonic generation is an oscillatory function of the input pump intensity (with a maximum efficiency of 56.5%) and is sensitive to the position of the input beam focus in the crystal. The quantum noise on the blue beam can be reduced below the shot-noise limit by 20% at low input power.

Journal of the Optical Society of America B•Jun 1, 2003•8 citations

High-power, 420-nm, low-intensity-noise laser source for quantum computing applications

Thomas Dubé, Coline Lavit, Dia Darwich +8 more

We demonstrate the generation of 20.2 W of continuous-wave, low-intensity noise, single-frequency light at 840 nm, obtained via sum-frequency mixing of two high-power infrared fiber laser systems in an MgO-doped periodically poled lithium niobate (ppLN) crystal. Subsequent cavity-enhanced frequency doubling to 420 nm yields an output power of 15.2 W. Respective conversion efficiencies of 48% and 79% are achieved for the sum-frequency and second-harmonic stages, with good beam quality (M 2 < 1.3), low intensity noise (<0.05% RMS [1 kHz–10 MHz]), and long-term continuous operation. Relative intensity noise and frequency noise of the generated signals are experimentally characterized.

Optics Letters•Apr 17, 2026•0 citations

Frequency-tunable squeezed light for spectroscopy

Eugene Simon Polzik, J. Carri, Harry J. Kimble

A frequency-tunable source of squeezed light would allow investigations of the atom-field interaction in a regime where fundamental new phenomena have been predicted.1 There are also opportunities for spectroscopy with sensitivity beyond the shot-noise limit. Toward these objectives, in our experiment we employ a single-frequency Ti-sapphire laser with tuning optimized around 852 nm (cesium resonance transition). The infrared output of the laser is frequency doubled in an external buildup cavity with a KNbO3 crystal as the nonlinear element. Efficient doubling provides 0.65 W of tunable blue output for 1.35 W of infrared input. This blue output is then used to pump an optical parametric oscillator (OPO) containing a second KNbO3 crystal for downconversion back to the infrared. The high power of the blue pump that we have achieved and the large nonlinearity of KNbO3 allows us to employ an OPO that is resonant only for the subharmonic infrared light. This design facilitates tuning of the OPO compared with the case in which the blue pump and the infrared are both resonant. The doubling cavity, OPO, and laser itself are locked relative to a stable reference cavity by an rf sideband technique, thus providing the possibility for tunability of the system with a single knob.

Annual Meeting Optical Society of America•Jan 1, 1991•0 citations
We experimentally present a high-efficiency generation of low-noise 447 nm laser by frequency doubling of a Ti:sapphire laser in an external ring cavity with a PPKTP crystal. The maximum blue laser power of 308 mW has been obtained and the corresponding conversion efficiency can reach 70%, when 440 mW infrared laser is injected. Moreover, the noise of the resulting blue laser can reach the quantum noise limit when the analyzing frequency is above 1.5 MHz. Our system provides an ideal pump field for an optical parametric amplifier for the generation of non-classical states of light matching matter absorption line.
We report on the observation of high efficiency frequency doubling of 1550 nm continuous-wave laser light in a nonlinear cavity containing a periodically poled potassium titanyl phosphate crystal (PPKTP). The fundamental field had a power of 1.10 W and was converted into 1.05 W at 775 nm, yielding a total external conversion efficiency of (95 \\pm 1)%. The latter value is based on the measured depletion of the fundamental field being consistent with the absolute values derived from numerical simulations. According to our model, the conversion efficiency achieved was limited by the non-perfect mode-matching into the nonlinear cavity and the pump power available. Our result shows that cavity-assisted frequency conversion based on PPKTP is well suited for low-decoherence frequency conversion of quantum states of light.
We report on the observation of high-efficiency frequency doubling of 1550 nm continuous-wave laser light in a nonlinear cavity containing a periodically poled potassium titanyl phosphate crystal (PPKTP). The fundamental field had a power of 1.10 W and was converted into 1.05 W at 775 nm, yielding a total external conversion efficiency of 95±1%. The latter value is based on the measured depletion of the fundamental field being consistent with the absolute values derived from numerical simulations. According to our model, the conversion efficiency achieved was limited by the nonperfect mode matching into the nonlinear cavity and by the nonperfect impedance matching for the maximum input power available. Our result shows that cavity-assisted frequency conversion based on PPKTP is well suited for low-decoherence frequency conversion of quantum states of light.
We present the generation of nonclassical state using an amplified diode laser as a light source. The intensity noise of an amplified diode laser was significantly suppressed and reached the shot noise limit at 15 MHz using both a filter cavity and resonant optical feedback. Frequency doubling efficiency of 66% and up to 120 mW output power of green has been achieved in cw second-harmonic generation from 1080 nm to 540 nm. Bright two-mode amplitude-squeezed state was generated from a type-II nondegenerate optical parametric amplifier pumped by generated green light. The measured noise reduction is 2.1+/-0.2 dB below the shot-noise level.
We report an experimental demonstration of highly efficient single-pass second-harmonic generation from 859 nm to 429.5 nm with picosecond pulses in a thick KNbO3 crystal. Both the conversion-efficiency and quantum-noise properties of the generated blue pulses are measured at various pump intensities under a strong focusing condition. We find that the variation of the conversion efficiency of the picosecond second-harmonic generation is an oscillatory function of the input pump intensity (with a maximum efficiency of 56.5%) and is sensitive to the position of the input beam focus in the crystal. The quantum noise on the blue beam can be reduced below the shot-noise limit by 20% at low input power.
We demonstrate the generation of 20.2 W of continuous-wave, low-intensity noise, single-frequency light at 840 nm, obtained via sum-frequency mixing of two high-power infrared fiber laser systems in an MgO-doped periodically poled lithium niobate (ppLN) crystal. Subsequent cavity-enhanced frequency doubling to 420 nm yields an output power of 15.2 W. Respective conversion efficiencies of 48% and 79% are achieved for the sum-frequency and second-harmonic stages, with good beam quality (M 2 < 1.3), low intensity noise (<0.05% RMS [1 kHz–10 MHz]), and long-term continuous operation. Relative intensity noise and frequency noise of the generated signals are experimentally characterized.
A frequency-tunable source of squeezed light would allow investigations of the atom-field interaction in a regime where fundamental new phenomena have been predicted.1 There are also opportunities for spectroscopy with sensitivity beyond the shot-noise limit. Toward these objectives, in our experiment we employ a single-frequency Ti-sapphire laser with tuning optimized around 852 nm (cesium resonance transition). The infrared output of the laser is frequency doubled in an external buildup cavity with a KNbO3 crystal as the nonlinear element. Efficient doubling provides 0.65 W of tunable blue output for 1.35 W of infrared input. This blue output is then used to pump an optical parametric oscillator (OPO) containing a second KNbO3 crystal for downconversion back to the infrared. The high power of the blue pump that we have achieved and the large nonlinearity of KNbO3 allows us to employ an OPO that is resonant only for the subharmonic infrared light. This design facilitates tuning of the OPO compared with the case in which the blue pump and the infrared are both resonant. The doubling cavity, OPO, and laser itself are locked relative to a stable reference cavity by an rf sideband technique, thus providing the possibility for tunability of the system with a single knob.