The pace of innovation in quantum information science has recently exploded due to the hope that a quantum computer will be able to solve a multitude of problems that are intractable using classical hardware. Current quantum devices are in what has been termed the ``noisy intermediate-scale quantum'', or NISQ stage. Quantum hardware available today with 50-100 physical qubits may be among the first to demonstrate a quantum advantage. However, there are many challenges to overcome, such as dealing with noise, lowering error rates, improving coherence times, and scalability. \n \nWe are at a time in the field where minimization of resources is critical so that we can run our algorithms sooner rather than later. Running quantum algorithms ``at scale'' incurs a massive amount of resources, from the number of qubits required to the circuit depth. A large amount of this is due to the need to implement operations fault-tolerantly using error-correcting codes. \n \nFor one, to run an algorithm we must be able to efficiently read in and output data. Fault-tolerantly implementing quantum memories may become an input bottleneck for quantum algorithms, including many which would otherwise yield massive improvements in algorithm complexity. We will also need efficient methods for tomography to characterize and verify our processes and outputs. Researchers will require tools to automate the design of large quantum algorithms, to compile, optimize, and verify their circuits, and to do so in a way that minimizes operations that are expensive in a fault-tolerant setting. Finally, we will also need overarching frameworks to characterize the resource requirements themselves. Such tools must be easily adaptable to new developments in the field, and allow users to explore tradeoffs between their parameters of interest. \n \nThis thesis contains three contributions to this effort: improving circuit synthesis using large-scale parallelization; designing circuits for quantum random-access memories and analyzing various time/space tradeoffs; using the mathematical structure of discrete phase space to select subsets of tomographic measurements. For each topic the theoretical work is supplemented by a software package intended to allow others researchers to easily verify, use, and expand upon the techniques herein.
The pace of innovation in quantum information science has recently exploded due to the hope that a quantum computer will be able to solve a multitude of problems that are intractable using classical hardware. Current quantum devices are in what has been termed the noisy intermediate-scale quantum'', or NISQ stage. Quantum hardware available today with 50-100 physical qubits may be among the first to demonstrate a quantum advantage. However, there are many challenges to overcome, such as dealing with noise, lowering error rates, improving coherence times, and scalability. \n \nWe are at a time in the field where minimization of resources is critical so that we can run our algorithms sooner rather than later. Running quantum algorithms at scale'' incurs a massive amount of resources, from the number of qubits required to the circuit depth. A large amount of this is due to the need to implement operations fault-tolerantly using error-correcting codes. \n \nFor one, to run an algorithm we must be able to efficiently read in and output data. Fault-tolerantly implementing quantum memories may become an input bottleneck for quantum algorithms, including many which would otherwise yield massive improvements in algorithm complexity. We will also need efficient methods for tomography to characterize and verify our processes and outputs. Researchers will require tools to automate the design of large quantum algorithms, to compile, optimize, and verify their circuits, and to do so in a way that minimizes operations that are expensive in a fault-tolerant setting. Finally, we will also need overarching frameworks to characterize the resource requirements themselves. Such tools must be easily adaptable to new developments in the field, and allow users to explore tradeoffs between their parameters of interest. \n \nThis thesis contains three contributions to this effort: improving circuit synthesis using large-scale parallelization; designing circuits for quantum random-access memories and analyzing various time/space tradeoffs; using the mathematical structure of discrete phase space to select subsets of tomographic measurements. For each topic the theoretical work is supplemented by a software package intended to allow others researchers to easily verify, use, and expand upon the techniques herein.
A universal fault-tolerant quantum computer that can solve efficiently problems such as integer factorization and unstructured database search requires millions of qubits with low error rates and long coherence times. While the experimental advancement towards realizing such devices will potentially take decades of research, noisy intermediate-scale quantum (NISQ) computers already exist. These computers are composed of hundreds of noisy qubits, i.e. qubits that are not error-corrected, and therefore perform imperfect operations in a limited coherence time. In the search for quantum advantage with these devices, algorithms have been proposed for applications in various disciplines spanning physics, machine learning, quantum chemistry and combinatorial optimization. The goal of such algorithms is to leverage the limited available resources to perform classically challenging tasks. In this review, we provide a thorough summary of NISQ computational paradigms and algorithms. We discuss the key structure of these algorithms, their limitations, and advantages. We additionally provide a comprehensive overview of various benchmarking and software tools useful for programming and testing NISQ devices.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.
The transition from noisy intermediate-scale quantum (NISQ) processors to large-scale fault-tolerant machines requires more than incremental improvements in physical qubit fidelity. While advances in quantum error correction (QEC) theory continue to lower the theoretical overhead of quantum computing, much of this research remains abstracted from the physical realities of qubit implementations. This disconnect often results in hardware-agnostic designs that are inefficient or impractical to build. In this dissertation, I identify three primary gaps between theoretical QEC research and practical hardware: (1) the high levels of noise and temporal instability in experimental devices that impede scalable QEC; (2) the prohibitively large qubit and time costs of useful algorithms, driven largely by the limitations of the standard surface code; and (3) the failure of current resource estimates to account for hardware-level constraints, such as limited connectivity and the complexity of implementing non-local operations. To bridge these gaps, I propose a holistic, cross-stack approach where the error correction protocols and the physical hardware are designed in concert. By developing realistic device models and hardware-aware solutions at the lowest levels of the software stack, we can accelerate the path toward functional fault-tolerance. I present my work across three research thrusts: first, leveraging codesign to mitigate hardware-specific noise and reduce physical error rates; second, developing software tools for fault-tolerant quantum computers to reduce the space-time overhead of the QEC layer; and third, proposing two novel hardware-aware QEC architectures that provide practical, high-performance routes to scalable quantum computation.
<!--HTML-->A universal fault-tolerant quantum computer that can solve efficiently problems such as integer factorization and unstructured database search requires millions of qubits with low error rates and long coherence times. While the experimental advancement towards realizing such devices will potentially take decades of research, noisy intermediate-scale quantum (NISQ) computers already exist. These computers are composed of hundreds of noisy qubits, i.e. qubits that are not error-corrected, and therefore perform imperfect operations in a limited coherence time. In the search for quantum advantage with these devices, algorithms have been proposed for applications in various disciplines spanning physics, machine learning, quantum chemistry and combinatorial optimization. The goal of such algorithms is to leverage the limited available resources to perform classically challenging tasks. In this talk, I provide an overview of NISQ algorithms, their limitations and potential advantages.
Many important physical and mathematical problems are difficult to solve on classical computers, resulting in difficulty in finding new advanced materials, simulating quantum field theories and solving large combinatorial optimisation tasks. Quantum computers have shown great promise in being able to solve these (and many other) problems faster than their classical counterparts, and therefore should be thoroughly investigated as a significant tool for enabling the acceleration of scientific progress. This work develops methods to tackle several problems across the spectrum of quantum algorithms, providing methods suitable for the near-term hardware, to the future where large fault-tolerant quantum computers exist. Therefore, the works in this thesis range from efficiently making use of limited quantum hardware to taking advantage of hardware benefits (e.g. excess qubits) as quantum computation advances. Covered topics include: an alternative paradigm for the optimisation of variational circuits and quantum neural networks; techniques for improving energy estimation of quantum states through the collection and processing of large amounts of randomised measurement data; the use of entanglement in guiding the automatic discovery of quantum circuits; investigating the role of symmetries in adiabatic state preparation of molecules and the large scale parallelisation of a common fault-tolerant subroutine, potentially producing large runtime speed-ups for the simulation of chemistry on quantum computers. Although there are many challenges remaining from both hardware and algorithms perspectives before the large-scale utility of quantum computers can be demonstrated, the contributions of this work make steps towards the efficient utilisation of quantum hardware that will be available in the coming years.