Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Demonstration of stimulated photon echo isolation using interferometric cancellation

Owen Wolfe, Tia Sharpe, R. Krishna Mohan, Zeb W. Barber

Published Jan 10, 2019• 3 citations
Publisher

Abstract

An alternative to phase-matched angled beam spatial-spectral holographic grating geometries for separating stimulated photon echoes (SPEs) from the probing pulse is proposed and demonstrated. By use of a Mach–Zehnder geometry with inhomogeneously broadened medium in both paths, the SPE can be interferometrically isolated from the generating probe pulse. This interferometric-based technique is well suited to waveguide geometries, which have benefits for future quantum and classical optical signal processing applications such as quantum memories, correlation, and efficient cryogenic microwave-to-optical conversion. Experimental demonstrations showing interferometric-based isolation in Tm3+-doped LiNbO3 at 3.2 K are performed and analyzed.

DOI
10.1364/ol.44.000371

Related papers

Interferometric methods for spatial-spectral holographic signal processing applications

Owen Wolfe

Spatial spectral holographic (SSH) systems have applications in signal processing including spectrum analysis to optical correlation. Beam splitters and material interactions can affect the phase relationships between fields in separate spots in the material (or fields bypassing the material). Interferometric methods allow for these phase shifts to be exploited for two primary uses: the isolation of fields generated by the material and the amplification of signals and the amplification of signals in the chirped readout of programmed spectra. Stimulated photon echoes are used as the basis of SSH material-based optical systems and have been suggested as a protocol for optical quantum memory. These applications require the stimulated echo field to be isolated from a probe field. Current methods take an angular approach to isolating fields. An alternative approach uses interferometric methods to isolate fields in a way that can be implemented in a photonic integrated circuit. This dissertation will present a mathematical model for the isolation of stimulated photon echoes in both a 2-port Mach-Zehnder interferometer and a 4-port interferometer designed to emulate the isolation achieved via the angular "Box-Geometry" using interferometric methods. Experimental stimulated photon echo studies in a Mach-Zehnder interferometer built around a sample of 0.01% Tm 3+ : LiNbO 3 will demonstrate the principle of interferometric isolation of stimulated photon echoes. Maxwell-Bloch simulations will be used to demonstrate the principle of echo isolation in the 4-port interferometer. Use of the chirped interferometric readout of programmed spectra is demonstrated for SSH grating processing and spectrum analysis is shown in experiments in a sample of 0.01% Tm 3+ : LiNbO 3. Improvements to signal-to-noise ratio over traditional readout are seen by using a strong local oscillator in both applications. In spectrum analysis applications, the recovery of the proper spectral line shape is demonstrated, and SNR improvements are shown for a given read power. In the grating experiments, a non-linear noise floor was shown that created a constraint on the usable read power for these experiments. In this case, the interferometric readout was able to produce an improvement in the signal-to-noise ratio that could not be achieved using a stronger read power.

•Jan 1, 2023•0 citations

Interference of Multimode Photon Echoes Generated in Spatially Separated Solid-State Atomic Ensembles

M. U. Staudt, Mikael Afzelius, Hugues de Riedmatten +6 more

High-visibility interference of photon echoes generated in spatially separated solid-state atomic ensembles is demonstrated. The solid-state ensembles were LiNbO(3) waveguides doped with erbium ions absorbing at 1.53 microm. Bright coherent states of light in several temporal modes (up to 3) are stored and retrieved from the optical memories using two-pulse photon echoes. The stored and retrieved optical pulses, when combined at a beam splitter, show almost perfect interference, which demonstrates both phase preserving storage and indistinguishability of photon echoes from separate optical memories. By measuring interference fringes for different storage times, we also show explicitly that the visibility is not limited by atomic decoherence. These results are relevant for novel quantum-repeater architectures with photon-echo based multimode quantum memories.

arXiv:0707.1814•Physical Review Letters•Oct 25, 2007•49 citations

Spectral programming of temporal pulse sequences using photon echoes

B. Luo, Ulf Elman, Stefan Kröll +1 more

Optical memories based on spectral hole burning (SHB) and stimulated photon echoes (SPE) are attracting much attention. Both approaches add an extra dimension for addressing (frequency and temporal dimension respectively) to the spatial dimensions. With these concepts the storage density can become 103 – 106 times higher than in conventional optical memories. In both approaches, the ratio of the inhomogeneous line width to the homogeneous line width of the ions activated in the storage process determines the improvement in storage density. Compared to the SHB approach, SPE has certain advantages including high R/W rate and ability to process the stored (spatial as well we temporal) information. Using SPE, the authors have experimentally realised the AND, OR and NOT logical operations [1,2]. Further all optical processing, such as temporal pattern recognition, can be done using SPE.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jan 1, 1996•0 citations

Anomalous spectral shape and diffraction of femtosecond time-and-space-domain holograms

Daniel Erni, Alexander Rebane, Olavi Ollikainen +2 more

Time-and-space-domain holography based on photon echoes in inhomogeneously broadened systems is a promising technique for ultrafast optical data storage and processing [1]. To faithfully reproduce the stored information it is important to control the spectral and spatial diffraction properties of the holographic gratings produced in the resonance medium.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jan 1, 1996•0 citations

Fidelity of an Optical Memory Based on Stimulated Photon Echoes

M. U. Staudt, Sara R. Hastings-Simon, M. Nilsson +7 more

We investigated the preservation of information encoded into the relative phase and amplitudes of optical pulses during storage and retrieval in an optical memory based on stimulated photon echo. By interfering photon echoes produced in a single-mode Ti:Er:LiNbO(3) waveguide, we found that decoherence in the medium translates only as loss and not as degradation of information. We measured a visibility for interfering echoes close to 100%. These results may have important implications for future long-distance quantum communication protocols.

arXiv:quant-ph/0609201•Physical Review Letters•Mar 14, 2007•91 citations

Spatial binary multiplication by photon echoes

D. Manganaris, M. K. Kim

The phase conjugation property of backward-stimulated photon echo (BSE) has numerous potential applications in optical data storage and processing. We demonstrate mixed binary multiplication of spatially encoded bit patterns, by taking advantage of the fact that the geometry of BSE is analogous to that of conventional holography or four-wave mixing of nonlinear optics, where an object (data) and a reference (write) beams interfere to create a grating inside the medium, and another reference (read) beam is diffracted from that grating. When all three input beams contain structures, the output pattern is the convolution and correlation of the input patterns, which, with certain arrangements and interpretation, can be used for multiplication of binary numbers. The experiments were done by using a 477.8 nm transition of praseodymium ion-doped in single-crystal lanthanum trifluoride.

Annual Meeting Optical Society of America•Jan 1, 1990•0 citations
An alternative to phase-matched angled beam spatial-spectral holographic grating geometries for separating stimulated photon echoes (SPEs) from the probing pulse is proposed and demonstrated. By use of a Mach–Zehnder geometry with inhomogeneously broadened medium in both paths, the SPE can be interferometrically isolated from the generating probe pulse. This interferometric-based technique is well suited to waveguide geometries, which have benefits for future quantum and classical optical signal processing applications such as quantum memories, correlation, and efficient cryogenic microwave-to-optical conversion. Experimental demonstrations showing interferometric-based isolation in Tm3+-doped LiNbO3 at 3.2 K are performed and analyzed.
Spatial spectral holographic (SSH) systems have applications in signal processing including spectrum analysis to optical correlation. Beam splitters and material interactions can affect the phase relationships between fields in separate spots in the material (or fields bypassing the material). Interferometric methods allow for these phase shifts to be exploited for two primary uses: the isolation of fields generated by the material and the amplification of signals and the amplification of signals in the chirped readout of programmed spectra. Stimulated photon echoes are used as the basis of SSH material-based optical systems and have been suggested as a protocol for optical quantum memory. These applications require the stimulated echo field to be isolated from a probe field. Current methods take an angular approach to isolating fields. An alternative approach uses interferometric methods to isolate fields in a way that can be implemented in a photonic integrated circuit. This dissertation will present a mathematical model for the isolation of stimulated photon echoes in both a 2-port Mach-Zehnder interferometer and a 4-port interferometer designed to emulate the isolation achieved via the angular "Box-Geometry" using interferometric methods. Experimental stimulated photon echo studies in a Mach-Zehnder interferometer built around a sample of 0.01% Tm 3+ : LiNbO 3 will demonstrate the principle of interferometric isolation of stimulated photon echoes. Maxwell-Bloch simulations will be used to demonstrate the principle of echo isolation in the 4-port interferometer. Use of the chirped interferometric readout of programmed spectra is demonstrated for SSH grating processing and spectrum analysis is shown in experiments in a sample of 0.01% Tm 3+ : LiNbO 3. Improvements to signal-to-noise ratio over traditional readout are seen by using a strong local oscillator in both applications. In spectrum analysis applications, the recovery of the proper spectral line shape is demonstrated, and SNR improvements are shown for a given read power. In the grating experiments, a non-linear noise floor was shown that created a constraint on the usable read power for these experiments. In this case, the interferometric readout was able to produce an improvement in the signal-to-noise ratio that could not be achieved using a stronger read power.
High-visibility interference of photon echoes generated in spatially separated solid-state atomic ensembles is demonstrated. The solid-state ensembles were LiNbO(3) waveguides doped with erbium ions absorbing at 1.53 microm. Bright coherent states of light in several temporal modes (up to 3) are stored and retrieved from the optical memories using two-pulse photon echoes. The stored and retrieved optical pulses, when combined at a beam splitter, show almost perfect interference, which demonstrates both phase preserving storage and indistinguishability of photon echoes from separate optical memories. By measuring interference fringes for different storage times, we also show explicitly that the visibility is not limited by atomic decoherence. These results are relevant for novel quantum-repeater architectures with photon-echo based multimode quantum memories.
Optical memories based on spectral hole burning (SHB) and stimulated photon echoes (SPE) are attracting much attention. Both approaches add an extra dimension for addressing (frequency and temporal dimension respectively) to the spatial dimensions. With these concepts the storage density can become 103 – 106 times higher than in conventional optical memories. In both approaches, the ratio of the inhomogeneous line width to the homogeneous line width of the ions activated in the storage process determines the improvement in storage density. Compared to the SHB approach, SPE has certain advantages including high R/W rate and ability to process the stored (spatial as well we temporal) information. Using SPE, the authors have experimentally realised the AND, OR and NOT logical operations [1,2]. Further all optical processing, such as temporal pattern recognition, can be done using SPE.
We investigated the preservation of information encoded into the relative phase and amplitudes of optical pulses during storage and retrieval in an optical memory based on stimulated photon echo. By interfering photon echoes produced in a single-mode Ti:Er:LiNbO(3) waveguide, we found that decoherence in the medium translates only as loss and not as degradation of information. We measured a visibility for interfering echoes close to 100%. These results may have important implications for future long-distance quantum communication protocols.
The phase conjugation property of backward-stimulated photon echo (BSE) has numerous potential applications in optical data storage and processing. We demonstrate mixed binary multiplication of spatially encoded bit patterns, by taking advantage of the fact that the geometry of BSE is analogous to that of conventional holography or four-wave mixing of nonlinear optics, where an object (data) and a reference (write) beams interfere to create a grating inside the medium, and another reference (read) beam is diffracted from that grating. When all three input beams contain structures, the output pattern is the convolution and correlation of the input patterns, which, with certain arrangements and interpretation, can be used for multiplication of binary numbers. The experiments were done by using a 477.8 nm transition of praseodymium ion-doped in single-crystal lanthanum trifluoride.