Quantum light and in particular single photons have become essential resources for a growing number of quantum applications including quantum computing, quantum key distribution and quantum metrology. Solid-state atomlike systems such as semiconductor quantum dots and color defects in crystals have become the hallmark of highly pure single photon emitters in the past two decades. A particular interest has been developed in nanocrystal quantum dots (NQDs) and color centers in diamond as potential compact room-temperature emitters. There are however several challenges that inhibit the use of such sources in current technologies including low photon extraction efficiency, low emission rates and relatively low single photon purities. In this work we will review our efforts in overcoming these technical difficulties using several complementary methods including designing several nanoantenna devices that enhance the directionality and emission rate of the nanoemitter. In addition, we developed several temporal heralding techniques to overcome the hurdle of low single photon purity in NQDs in an effort to produce a highly pure, bright and efficient single photon source on-chip.
Quantum light and in particular single photons have become essential resources for a growing number of quantum applications including quantum computing, quantum key distribution and quantum metrology. Solid-state atomlike systems such as semiconductor quantum dots and color defects in crystals have become the hallmark of highly pure single photon emitters in the past two decades. A particular interest has been developed in nanocrystal quantum dots (NQDs) and color centers in diamond as potential compact room-temperature emitters. There are however several challenges that inhibit the use of such sources in current technologies including low photon extraction efficiency, low emission rates and relatively low single photon purities. In this work we will review our efforts in overcoming these technical difficulties using several complementary methods including designing several nanoantenna devices that enhance the directionality and emission rate of the nanoemitter. In addition, we developed several temporal heralding techniques to overcome the hurdle of low single photon purity in NQDs in an effort to produce a highly pure, bright and efficient single photon source on-chip.
Efficient, high rate photon sources with high single-photon purity are essential ingredients for quantum technologies. Single-photon sources based on solid state emitters such as quantum dots are very advantageous for integrated photonic circuits, but they can suffer from a high two-photon emission probability, which in cases of noncryogenic environment cannot be spectrally filtered. Here we propose two temporal purification-by-heralding methods for using a two-photon emission process to yield highly pure and efficient single-photon emission, bypassing the inherent problem of spectrally overlapping biphoton emission at elevated temperatures. We experimentally emulate their feasibility on the emission from a single nanocrystal quantum dot at room temperature, exhibiting single-photon purities exceeding 99.5%, without a significant loss of single-photon efficiency. By utilizing these methods with commercially available components, nanocrystal quantum dots can be made realistic high-quality room-temperature sources for single photons. These approaches can also be applied for any indeterministic source of spectrally broadband photon pairs.
Developing reliable and efficient single-photon sources is crucial for advancing quantum technologies, relying on nonlinear frequency conversion or spontaneous emission from individual quantum emitters. While different types of single-photon sources excel in specific applications, none meet all criteria for an “ideal” source: exceptional brightness, high purity, and indistinguishability. To address this challenge, coupling single-photon emitters with designer nanostructures can significantly enhance emission performance, a pivotal area in quantum nanophotonics. This review summarizes recent advancements over the past decade in generating and manipulating single photons, emphasizing the pivotal role of nanostructure coupling. Single-photon emission systems—such as nonlinear crystals, solid-state defects, quantum dots, carbon nanotubes, and two-dimensional materials—are categorized quantitatively based on their ability to achieve high purity, indistinguishability, and brightness, presented in a three-dimensional technology map. Furthermore, nanostructure engineering is showcased for manipulating properties such as emission direction, polarization, chirality, and entanglement of single photons. By elucidating these critical aspects, this review aims to advance understanding of how advancements in nanostructured environments promise to shape the future of single-photon generation and manipulation within quantum nanophotonics.
Quantum communication and quantum metrology established a demand for an accessible solid state systems which can generate a stream of single photons on demand [1]. Although single photon emission has been demonstrated from quantum dots (QD)[1,2], single molecules [3] and nanowires [4], their practical operation is limited by the temperature or photostability. Diamond crystals, however, are the most promising platform for generation of robust, photo-stable, single photons at room temperature [5,6]. Nevertheless, out of more than 500 existing optical centers in diamond only three known centers demonstrated a clear single photon emission: the nitrogen-vacancy complex [6,7], the silicon-vacancy complex [8] and the nickel-nitrogen complex [9,10]. Recent progress in materials science and fabrication techniques of diamond color centers unveiled novel quantum emitters with photo-physical properties surpassing the current mainstream [11,12,13]. Consequently, the versatility of the diamond lattice to host various impurities which give luminescence signals lead to a dramatic discovery of ultra bright single photon emitters operating in the MHz regime [14]. These new centers, comparable with QD in terms of brightness [1], but have the tremendous advantage of their room temperature operation and photo-stability. Furthermore, it opened a new avenue to investigate essentially an unknown group of single photon emitters. A brief description of the fabrication methods and a detailed quantum optical characterization of this class of diamond emitters is the subject of this presentation. In particular we will present the photo-physical properties of a novel family of single photon emitters, most likely originated from Cr impurities within the chemical vapor deposition grown nano-diamond crystals. We concentrate on the typical emission lines in the range of 740 - 790 nm, which exhibit single photon emission with count rate in the range of 0.8-3.2 106 counts/s at the limit of infinite optical excitation power, and life time as short as 1 ns. Even more, some of the emitters exhibit a photon statistics without any photon bunching, indicating a two-level system with unitary quantum efficiency. We will also show preliminary results of a resonant excitation at 4 K. We will highlight future directions to optimize these sources and avenues to investigate the fundamental properties of these centers.
The exploitation of emerging quantum technologies requires efficient fabrication of key building blocks. Sources of single photons are extremely important across many applications as they can serve as vectors for quantum information—thereby allowing long-range (perhaps even global-scale) quantum states to be made and manipulated for tasks such as quantum communication or distributed quantum computation. At the single-emitter level, quantum sources also afford new possibilities in terms of nanoscopy and bio-marking. Color centers in diamond are prominent candidates to generate and manipulate quantum states of light, as they are a photostable solid-state source of single photons at room temperature. In this review, we discuss the state of the art of diamond-based single-photon emitters and highlight their fabrication methodologies. We present the experimental techniques used to characterize the quantum emitters and discuss their photophysical properties. We outline a number of applications including quantum key distribution, bio-marking and sub-diffraction imaging, where diamond-based single emitters are playing a crucial role. We conclude with a discussion of the main challenges and perspectives for employing diamond emitters in quantum information processing.
Quantum light is a key resource for the development of quantum-enhanced technologies such as secure communications, quantum networks, distributed quantum computing, metrology, etc. The development of these technologies requires light sources emitting single photons in a pure quantum state as well as efficient photon-photon gates. Such sources and gates can be obtained making use of the single-photon sensitivity of an atomic transition. We study artificial atoms in the form of semiconductor quantum dots to develop building blocks for optical quantum technologies. We use the tools of opto-electronics and nanotechnology to fabricate close to ideal atom-photon interfaces, where a single artificial atom interacts with a single mode of the optical field. We show that cavity quantum electrodynamics allows to largely isolate the artificial atoms from all sources of decoherence such as charge noise and crystal vibrations. We obtain bright solid-state sources of single photons with very high quantum purity, not only in the frequency basis, but for the first time also in the photon number basis. Finally, we have made progresses toward the development of efficient two-photon gates, with devices performing as nonlinear switches at the single-photon level. Some references: High-performances quantum light sources Somaschi et al., Nature Photonics 10, 340 (2016) Grange et al, Phys. Rev. Lett. 118, 253602 (2017) Senellart, Solomon and White, Nature Nanotechnology 12, 1026 (2017) J. C. Loredo, C. Anton, et. al, arXiv:1810.05170 Scaling-up optical quantum computing Loredo et al., Optica 3, 433 (2016) Loredo et al., Phys. Rev. Lett. 118, 130503 (2017) Toward efficient photon-photon gates Giesz et al., Nat. Comm 7, 11986 (2016) De Santis et al, Nature Nanotechnology 12, 663 (2017)
The development of a robust light source that emits one photon at a time is an outstanding challenge in quantum science and technology. Here, at the transition from many to single photon optical communication systems, fully quantum mechanical effects may be utilized to achieve new capabilities, most notably perfectly secure communication via quantum cryptography. Practical implementations place stringent requirements on the device properties, including stable photon generation, room temperature operation, and efficient extraction of many photons. Single photon light emitting devices based on fluorescent dye molecules, quantum dots, and carbon nanotube material systems have all been explored, but none have simultaneously demonstrated all criteria. Here, we describe the design, fabrication, and characterization of a bright source of single photons consisting of an individual Nitrogen-vacancy color center (NV center) in a diamond nanowire operating in ambient conditions. The nanowire plays a positive role in increasing the number of single photons collected from the NV center by an order of magnitude over devices based on bulk diamond crystals, and allows operation at an order of magnitude lower power levels. This result enables a new class of nanostructured diamond devices for room temperature photonic and quantum information processing applications, and will also impact fields as diverse as biological and chemical sensing, opto-mechanics, and scanning-probe microscopy.