As one of the most potential types of low-density parity-check (LDPC) codes, CPM-QC-LDPC code has considerable advantages but there still exist some limitations in practical application, for example, the existing decoding algorithm has a low convergence rate and a high decoding complexity.According to the structural property of this code, we propose a new method based on a CPM-RID decoding algorithm that decodes block-by-block with weights, which are obtained by neural network training.From the simulation results, we can conclude that our proposed method not only improves the bit error rate and frame error rate performance but also increases the convergence rate, when compared with the original CPM-RID decoding algorithm and scaled MSA algorithm.
As one of the most potential types of low-density parity-check (LDPC) codes, CPM-QC-LDPC code has considerable advantages but there still exist some limitations in practical application, for example, the existing decoding algorithm has a low convergence rate and a high decoding complexity.According to the structural property of this code, we propose a new method based on a CPM-RID decoding algorithm that decodes block-by-block with weights, which are obtained by neural network training.From the simulation results, we can conclude that our proposed method not only improves the bit error rate and frame error rate performance but also increases the convergence rate, when compared with the original CPM-RID decoding algorithm and scaled MSA algorithm.
Quasi cyclic LDPC (QC-LDPC) codes consisting of circulant permutation matrices (CPM-QC-LDPC) are one of the most attractive types of LDPC codes due to their many advantages. In this paper, we mainly do some research on CPM-QC-LDPC codes. We first propose a two-stage decoding scheme mainly based on parity check matrix transform (MT), which can efficiently improve the bit error rate performance. To optimize the tradeoff between hardware implementation complexity and decoding performance, an improved method that combines our proposed MT scheme with the existing CPM-RID decoding scheme is presented. An experiment shows that both schemes can improve the bit error rate (BER) performance. Finally, we show that the MT decoding mechanism can be applied to other types of LDPC codes. We apply the MT scheme to random LDPC codes and show that it can efficiently lower the error floor.
A very important and near optimum group of the block codes that have been developed in direction of Shannon's theory concept, is low density parity check (LDPC) code. There have been presented different algorithms for decoding of this class of code such as maximum likelihood (ML), bit flipping (BF), a posteriori probability (APP) and sum product (SP) algorithms that the first two of them decode by hard criterion and two others decode by soft criterion. In this article, considering LDPC codes structure and taking advantage of LDPC codes demonstrated by Tanner graph, we have presented a quite new method based on multi layer perceptron (MLP) neural networks that decodes LDPC codes by soft decision manner. This method opens another new way for LDPC and even other block codes decoding. Simulation results display good performance of this method compared to other known algorithms.
In this paper, a combined Low-Density Parity-Check (LDPC) code decoding design method, called modified Block-Type LDPC (B-LDPC), for realistic LDPC coding system architectures is presented. The B-LDPC code, which is a special class of quasi-cyclic LDPC (QC-LDPC), has an efficient encoding algorithm owing to the simple structure of their parity-check matrices. A proposed distribution of irregular parity-check matrix for the modified B-LDPC is developed so that we can obtain an area-efficient decoder design, good error correction performance, and achievable architecture implementation. The modified B-LDPC code decoding utilizes the iterative min-sum algorithm (MSA) and its decoding architecture design employs the non-overlapping operations of bit node unit (BNU) and check node unit (CNU). Different block matrix sizes for parity-check matrix can be adopted so that the modified B-LDPC code decoding improves the throughput without obvious performance degradation.
Low-density parity-check (LDPC) codes have been one of the most popular error correction candidates in modern communication and data storage systems for the past three decades due to their capacity-approaching error correction capability under the Belief Propagation (BP) decoding algorithms. In this dissertation, we investigate three topics related to efficient and effective decoding algorithms and the code design of LDPC codes. In the first part of this dissertation, we propose a methodology with the help of artificial intelligence to design Finite Alphabet Iterative Decoders (FAID) for LDPC codes, which are not only of great theoretical but also practical importance. This model-driven neural network (NN) framework unfolds the decoding iterations, introduces quantized neural networks (QNN) to model the FAIDs, and proposes a new cost function, namely, bit error rate (BER), to address the inefficiency in discrete-output channel scenarios. The low precision activations in the QNN and quantization in the cost functions cause a critical issue that their gradients vanish almost everywhere, making it difficult to use classical backward propagation. We design and leverage straight-through estimators as surrogate gradients to tackle this issue and provide a joint training scheme. These QNN-aided FAIDs, are capable of surpassing the floating-point BP algorithms, with much lower complexity and faster convergence. The QNN-aided approach is general, as it can be applied to both continuous and discrete-output channels. In the second part of this dissertation, we propose a new code construction of LDPC codes based on the conventional parity-check matrices of Reed-Solomon (RS) codes. We investigate the girth and cycle structure and introduce an efficient searching algorithm to reduce short cycles in their Tanner graphs and to construct LDPC codes with a girth of at least eight. We use masking to further reduce the number of short cycles and to adjust the column and row weights of the parity-check matrices of the constructed codes for performance improvement. Our designs are systematic and flexible, which balance the requirements of good waterfall performance and low error-floor while maintaining a structure that facilitates implementation. In the third part of this dissertation, we investigate binary quasi-cyclic (QC) LDPC codes and their capability to correct phased bursts of erasures. We prove that the peeling algorithm when applied to such parity-check matrices of column weight two can correct all erasures that can be corrected by a maximum likelihood (ML) decoder. We show that by modifying the parity-check matrices of column weight two and globally coupling them, the erasure correcting capability can be further enhanced. For the Additive White Gaussian Noise (AWGN) channel, we design QC LDPC codes with parity-check matrices of column weight three or more that can correct phased bursts of erasures and perform well over the AWGN channel. Our analysis of QC-LDPC codes with parity-check matrices of column weight two is rather comprehensive as we determine, for all such codes, their dimensions, minimum Hamming distances, and their capabilities to correct phased bursts.
Abstract Low Density Parity Check (LDPC) codes have been extraordinarily important in the field of communications because its error-correction approximates to Shannon limit. Binary LDPC codes have been applied in many fields, and relatively Non-Binary (NB) LDPC codes have recently attracted considerable attention on account of their better error performance. Common NB-LDPC codes decoding algorithm involves Belief Propagation (BP) algorithm, Fast Hadamard Transform-BP (FHT-BP) algorithm, etc. The decoding performance of each algorithm has a certain upper limit. In this paper, the code word structure of NB-LDPC codes is considered, and the decoding of LDPC codes under Galois Field(4) (GF(4)) is mainly indicated. On the basis of the FHT-BP algorithm, Multi-Layer Perceptron (MLP) neural networks and bit flipping (BF) method are introduced for joint decoding. This method can improve the error performance of LDPC codes and achieve better decoding results.
Low-density parity-check (LDPC) codes have been successfully commercialized in communication systems due to their strong error correction capabilities and simple decoding process. However, the error-floor phenomenon of LDPC codes, in which the error rate stops decreasing rapidly at a certain level, presents challenges for achieving extremely low error rates and deploying LDPC codes in scenarios demanding ultra-high reliability. In this work, we propose training methods for neural min-sum (NMS) decoders to eliminate the error-floor effect. First, by leveraging the boosting learning technique of ensemble networks, we divide the decoding network into two neural decoders and train the post decoder to be specialized for uncorrected words that the first decoder fails to correct. Secondly, to address the vanishing gradient issue in training, we introduce a block-wise training schedule that locally trains a block of weights while retraining the preceding block. Lastly, we show that assigning different weights to unsatisfied check nodes effectively lowers the error-floor with a minimal number of weights. By applying these training methods to standard LDPC codes, we achieve the best error-floor performance compared to other decoding methods. The proposed NMS decoder, optimized solely through novel training methods without additional modules, can be integrated into existing LDPC decoders without incurring extra hardware costs. The source code is available at https://github.com/ghy1228/LDPC_Error_Floor .