Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

APL Photonics

Photon pair generation using a silicon photonic hybrid laser

Xiaoxi Wang, Chaoxuan Ma, Ranjeet Kumar, Pierre Doussiere, Richard Jones, Haisheng Rong, Shayan Mookherjea

Published Aug 27, 2018• 12 citations
Publisher

Abstract

We report photon pairs and heralded single photons generated at 1310 nm wavelengths using silicon photonics technology, demonstrating that comparable performance could be achieved when a silicon microring resonator was pumped either by a desktop laser instrument or by an electrically injected, room-temperature hybrid silicon laser. Measurements showed that 130 kilo-coincidence-counts per second pair rates could be generated, with coincidences-to-accidentals ratio approximately 100 at about 0.34 mW optical pump power and anti-bunching upon heralding with second-order intensity correlation g(2)(0) = 0.06 at about 0.9 mW optical pump power. These results suggest that hybrid silicon lasers, which are ultra-compact and wafer-scale manufacturable, could be used in place of packaged, stand-alone lasers for generating photon pairs at data communication wavelengths and enable large-scale, cost-effective manufacturing of integrated sources for quantum communications and computing.

DOI
10.1063/1.5040118

Related papers

Integrated silicon photonics for quantum optical communications (Conference Presentation)

Shayan Mookherjea

Photon pairs and heralded single photons are a useful resource in quantum communication, computation, and measurement. Room-temperature microchip-scale integrated devices could enable scalability, robustness and low-cost deployment in practical applications. Silicon is an attractive integration platform, since pair generation by spontaneous four-wave mixing at 1.2 - 1.6 micron wavelengths requires optical power levels that can be delivered by compact electrically-driven laser diodes. However, silicon photonics lacks a native laser device, and the propagation losses are not especially low, although they are somewhat lower than III-V integrated optics, which does have an integrated laser. Nevertheless, silicon photonics can be expected to become a widely-adopted platform for photonics – both classical and quantum – because of the ability to leverage the mature fabrication processes using large-area silicon wafers inherited from the development of microelectronics. Moreover, scalable quantum optics requires electronics for control, drivers and readout circuits, which silicon microelectronic technology can supply. Our research is improving the performance of silicon photonics components for quantum optical communications, and is increasing the level of integration in the quantum silicon photonics toolkit, using microelectronic components and electrically-driven hybrid silicon lasers.

SPIE Silicon Photonics•Mar 14, 2018•0 citations

Photon Pair Generation Using Silicon Photonic Microring and Hybrid Laser

Xiaoxi Wang, Chaoxuan Ma, Ranjeet Kumar +4 more

Using all silicon photonic components, including an electrically-pumped hybrid silicon laser and a high-Q ring resonator, photon pairs with non-classical correlations were generated at room temperature near 1310 nm wavelengths.

Conference on Lasers and Electro-Optics•Jan 1, 2017•4 citations

Silicon photonic entangled photon-pair and heralded single photon generation with CAR > 12,000 and g^(2)(0) < 0006

Chaoxuan Ma, Xiaoxi Wang, Vikas Anant +3 more

We report measurements of time-frequency entangled photon pairs and heralded single photons at 1550~nm wavelengths generated using a microring resonator pumped optically by a diode laser. Along with a high spectral brightness of pair generation, the conventional metrics used to describe performance, such as Coincidences-to-Accidentals Ratio (CAR), conditional self-correlation [$g^{(2)}(0)$], two-photon energy-time {F}ranson interferometric visibility etc. are shown to reach a high-performance regime not yet achieved by silicon photonics, and attained previously only by crystal, glass and fiber-based pair-generation devices.

arXiv:1710.01001•Optics Express•Dec 19, 2017•154 citations

Generating photon pairs from a silicon microring resonator using an electronic step recovery diode for pump pulse generation

Marc Savanier, Shayan Mookherjea

Generation of photon pairs from compact, manufacturable, and inexpensive silicon (Si) photonic devices at room temperature may help develop practical applications of quantum photonics. An important characteristic of photon-pair generation is the two-photon joint spectral intensity, which describes the frequency correlations of the photon pair. Recent attempts to generate a factorizable photon-pair state suitable for heralding have used short optical pump pulses from mode-locked lasers, which are much more expensive and bigger table-top or rack-sized instruments compared with the Si microchip used for generating photon pairs, and thus dominate the cost and inhibit the miniaturization of the source. Here, we generate photon pairs from an Si microring resonator by using an electronic step-recovery diode to drive an electro-optic modulator which carves the pump light from a continuous-wave laser diode into pulses of the appropriate width, thus potentially eliminating the need for optical mode-locked lasers.

arXiv:1604.00408•Applied Physics Letters•Jun 20, 2016•9 citations

Optimizing photon-pair generation electronically using a p-i-n diode incorporated in a silicon microring resonator

Marc Savanier, Ranjeet Kumar, Shayan Mookherjea

Silicon photonic microchips may be useful for compact, inexpensive, room-temperature optically pumped photon-pair sources, which unlike conventional photon-pair generators based on crystals or optical fibers, can be manufactured using CMOS-compatible processes on silicon wafers. It has been shown that photon pairs can be created in simple structures such as microring resonators at a rate of a few hundred kilohertz using less than a milliwatt of optical pump power, based on the process of spontaneous four-wave mixing. To create a practical photon-pair source, however, also requires some way of monitoring the device and aligning the pump wavelength when the temperature varies, since silicon resonators are highly sensitive to temperature. In fact, monitoring photodiodes are standard components in classical laser diodes, but the incorporation of germanium or InGaAs photodiodes would raise the cost and fabrication complexity. Here, we present a simple and effective all-electronic technique for finding the optimum operating point for the microring used to generate photon pairs, based on measuring the reverse-biased current in a silicon p-i-n junction diode fabricated across the waveguide that constitutes the silicon microring. We show that by monitoring the current, and using it to tune the pump laser wavelength, the photon-pair generation properties of the microring can be preserved over a temperature range of more than 30 °C.

Applied Physics Letters•Sep 28, 2015•60 citations

Photon pair generation from compact silicon microring resonators using microwatt-level pump powers

Marc Savanier, Ranjeet Kumar, Shayan Mookherjea

Microring resonators made from silicon are becoming a popular microscale device format for generating photon pairs at telecommunications wavelengths at room temperature. In compact devices with a footprint less than 5 × 10(-4) mm2, we demonstrate pair generation using only a few microwatts of average pump power. We discuss the role played by important parameters such as the loss, group-velocity dispersion and the ring-waveguide coupling coefficient in finding the optimum operating point for silicon microring pair generation. Silicon photonics can be fabricated using deep ultraviolet lithography wafer-scale fabrication processes, which is scalable and cost-effective. Such small devices and low pump power requirements, and the side-coupled waveguide geometry which uses an integrated waveguide, could be beneficial for future scaled-up architectures where many pair-generation devices are required on the same chip.

arXiv:1511.03359•Optics Express•Feb 9, 2016•74 citations
We report photon pairs and heralded single photons generated at 1310 nm wavelengths using silicon photonics technology, demonstrating that comparable performance could be achieved when a silicon microring resonator was pumped either by a desktop laser instrument or by an electrically injected, room-temperature hybrid silicon laser. Measurements showed that 130 kilo-coincidence-counts per second pair rates could be generated, with coincidences-to-accidentals ratio approximately 100 at about 0.34 mW optical pump power and anti-bunching upon heralding with second-order intensity correlation g(2)(0) = 0.06 at about 0.9 mW optical pump power. These results suggest that hybrid silicon lasers, which are ultra-compact and wafer-scale manufacturable, could be used in place of packaged, stand-alone lasers for generating photon pairs at data communication wavelengths and enable large-scale, cost-effective manufacturing of integrated sources for quantum communications and computing.
Photon pairs and heralded single photons are a useful resource in quantum communication, computation, and measurement. Room-temperature microchip-scale integrated devices could enable scalability, robustness and low-cost deployment in practical applications. Silicon is an attractive integration platform, since pair generation by spontaneous four-wave mixing at 1.2 - 1.6 micron wavelengths requires optical power levels that can be delivered by compact electrically-driven laser diodes. However, silicon photonics lacks a native laser device, and the propagation losses are not especially low, although they are somewhat lower than III-V integrated optics, which does have an integrated laser. Nevertheless, silicon photonics can be expected to become a widely-adopted platform for photonics – both classical and quantum – because of the ability to leverage the mature fabrication processes using large-area silicon wafers inherited from the development of microelectronics. Moreover, scalable quantum optics requires electronics for control, drivers and readout circuits, which silicon microelectronic technology can supply. Our research is improving the performance of silicon photonics components for quantum optical communications, and is increasing the level of integration in the quantum silicon photonics toolkit, using microelectronic components and electrically-driven hybrid silicon lasers.
We report measurements of time-frequency entangled photon pairs and heralded single photons at 1550~nm wavelengths generated using a microring resonator pumped optically by a diode laser. Along with a high spectral brightness of pair generation, the conventional metrics used to describe performance, such as Coincidences-to-Accidentals Ratio (CAR), conditional self-correlation [g(2)(0)g^{(2)}(0)g(2)(0)], two-photon energy-time {F}ranson interferometric visibility etc. are shown to reach a high-performance regime not yet achieved by silicon photonics, and attained previously only by crystal, glass and fiber-based pair-generation devices.
Generation of photon pairs from compact, manufacturable, and inexpensive silicon (Si) photonic devices at room temperature may help develop practical applications of quantum photonics. An important characteristic of photon-pair generation is the two-photon joint spectral intensity, which describes the frequency correlations of the photon pair. Recent attempts to generate a factorizable photon-pair state suitable for heralding have used short optical pump pulses from mode-locked lasers, which are much more expensive and bigger table-top or rack-sized instruments compared with the Si microchip used for generating photon pairs, and thus dominate the cost and inhibit the miniaturization of the source. Here, we generate photon pairs from an Si microring resonator by using an electronic step-recovery diode to drive an electro-optic modulator which carves the pump light from a continuous-wave laser diode into pulses of the appropriate width, thus potentially eliminating the need for optical mode-locked lasers.
Silicon photonic microchips may be useful for compact, inexpensive, room-temperature optically pumped photon-pair sources, which unlike conventional photon-pair generators based on crystals or optical fibers, can be manufactured using CMOS-compatible processes on silicon wafers. It has been shown that photon pairs can be created in simple structures such as microring resonators at a rate of a few hundred kilohertz using less than a milliwatt of optical pump power, based on the process of spontaneous four-wave mixing. To create a practical photon-pair source, however, also requires some way of monitoring the device and aligning the pump wavelength when the temperature varies, since silicon resonators are highly sensitive to temperature. In fact, monitoring photodiodes are standard components in classical laser diodes, but the incorporation of germanium or InGaAs photodiodes would raise the cost and fabrication complexity. Here, we present a simple and effective all-electronic technique for finding the optimum operating point for the microring used to generate photon pairs, based on measuring the reverse-biased current in a silicon p-i-n junction diode fabricated across the waveguide that constitutes the silicon microring. We show that by monitoring the current, and using it to tune the pump laser wavelength, the photon-pair generation properties of the microring can be preserved over a temperature range of more than 30 °C.
Microring resonators made from silicon are becoming a popular microscale device format for generating photon pairs at telecommunications wavelengths at room temperature. In compact devices with a footprint less than 5 × 10(-4) mm2, we demonstrate pair generation using only a few microwatts of average pump power. We discuss the role played by important parameters such as the loss, group-velocity dispersion and the ring-waveguide coupling coefficient in finding the optimum operating point for silicon microring pair generation. Silicon photonics can be fabricated using deep ultraviolet lithography wafer-scale fabrication processes, which is scalable and cost-effective. Such small devices and low pump power requirements, and the side-coupled waveguide geometry which uses an integrated waveguide, could be beneficial for future scaled-up architectures where many pair-generation devices are required on the same chip.