We analyze the coupling of two qubits via an epitaxial semiconducting junction. In particular, we consider three configurations that include pairs of transmons or gatemons as well as gatemonlike two qubits formed by an epitaxial four-terminal junction. These three configurations provide electrical control of the interaction between the qubits by applying voltage to a metallic gate near the semiconductor junction and can be utilized to naturally realize a controlled-Z gate (CZ). We calculate the fidelity and timing for such a CZ gate. We demonstrate that in the absence of decoherence, the CZ gate can be performed under 50 ns with gate error below ${10}^{\ensuremath{-}4}$.
Precise control of superconducting qubits is essential for advancing both quantum simulation and quantum error correction. Recently, transmon qubit systems employing the single-transmon coupler (STC) scheme have demonstrated high-fidelity single- and two-qubit gate operations by dynamically tuning the effective coupling between qubits. However, the integration of STCs increases the number of control lines, thereby posing a significant bottleneck for chip routing and scalability. To address this challenge, we propose a robust control line multiplexing scheme based on a double-transmon coupler (DTC) architecture, which enables shared coupler control lines to substantially reduce wiring complexity. Moreover, we experimentally verify that this multiplexed configuration efficiently suppresses undesirable static
ZZ coupling while maintaining accurate control over two-qubit gate operations. We further demonstrate the feasibility of the architecture through two distinct gate implementations: a fast coupler
Z-control-based CZ gate and a parametric iSWAP gate. To validate the practical applicability of this multiplexing approach in quantum circuits, we prepare Bell and three-qubit GHZ states using the proposed scheme with fidelity exceeding 99% and 96%, respectively. This multiplexed DTC architecture offers significant potential to minimize wiring overhead in two-dimensional qubit arrays, thereby greatly enhancing the scalability of superconducting quantum processors.
Recent experiments have demonstrated superconducting transmon qubits with semiconductor nanowire Josephson junctions. These hybrid gatemon qubits utilize field effect tunability characteristic of semiconductors to allow complete qubit control using gate voltages, potentially a technological advantage over conventional flux-controlled transmons. Here, we present experiments with a two-qubit gatemon circuit. We characterize qubit coherence and stability and use randomized benchmarking to demonstrate single-qubit gate errors below 0.7% for all gates, including voltage-controlled Z rotations. We show coherent capacitive coupling between two gatemons and coherent swap operations. Finally, we perform a two-qubit controlled-phase gate with an estimated fidelity of 91%, demonstrating the potential of gatemon qubits for building scalable quantum processors.
Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.