Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.02249

Multiplexed double-transmon coupler scheme in scalable superconducting quantum processor

Tianqi Cai, Chitong Chen, Kunliang Bu, Sainan Huai, Xiaopei Yang, Zhiwen Zong, Yuan Li, Zhenxing Zhang, Yi-Cong Zheng, Shengyu Zhang

quant-phSubmitted Nov 4, 2025• Announced Nov 5, 2025• 0 citations
arXivHTMLPDF

Abstract

Precise control of superconducting qubits is essential for advancing both quantum simulation and quantum error correction. Recently, transmon qubit systems employing the single-transmon coupler (STC) scheme have demonstrated high-fidelity single- and two-qubit gate operations by dynamically tuning the effective coupling between qubits. However, the integration of STCs increases the number of control lines, thereby posing a significant bottleneck for chip routing and scalability. To address this challenge, we propose a robust control line multiplexing scheme based on a double-transmon coupler (DTC) architecture, which enables shared coupler control lines to substantially reduce wiring complexity. Moreover, we experimentally verify that this multiplexed configuration efficiently suppresses undesirable static $ZZ$ coupling while maintaining accurate control over two-qubit gate operations. We further demonstrate the feasibility of the architecture through two distinct gate implementations: a fast coupler $Z$-control-based CZ gate and a parametric iSWAP gate. To validate the practical applicability of this multiplexing approach in quantum circuits, we prepare Bell and three-qubit GHZ states using the proposed scheme with fidelity exceeding 99% and 96%, respectively. This multiplexed DTC architecture offers significant potential to minimize wiring overhead in two-dimensional qubit arrays, thereby greatly enhancing the scalability of superconducting quantum processors.

Related papers

High-performance multiqubit system with double-transmon couplers: Toward scalable superconducting quantum computers

Kentaro Kubo, Yinghao Ho, Hayato Goto

Tunable couplers in superconducting quantum computers have enabled fast and accurate two-qubit gates, with reported high fidelities over 99% in various architectures and gate-implementation schemes. However, there are few tunable couplers whose performance in multiqubit systems is clarified, except for the most widely used one: single-transmon coupler (STC). Achieving similar accuracy to isolated two-qubit systems remains challenging due to various undesirable couplings but is necessary for scalability. In this work, we numerically analyze a system of three fixed-frequency qubits coupled via two double-transmon couplers (DTCs) where nearest-neighbor qubits are highly detuned and also next-nearest-neighbor ones are nearly resonant. The DTC is a recently proposed tunable coupler, which consists of two fixed-frequency transmons coupled through a common loop with an additional Josephson junction. We find that the DTC cannot only reduce undesired residual couplings sufficiently, as well as in isolated two-qubit systems, but also enables implementations of 30-ns CZ gates and individual and simultaneous 10-ns π / 2 pulses with fidelities over 99.99%. For comparison, we also investigate the system where the DTCs are replaced by the STCs. The results show that the DTC outperforms the STC in terms of both residual coupling suppression and gate accuracy in the above systems. From these results, we expect that the DTC architecture is promising for realizing high-performance, scalable superconducting quantum computers. Published by the American Physical Society 2024

arXiv:2402.05361•Physical Review Applied•Aug 21, 2024•8 citations

Multiplexed control scheme for scalable quantum information processing with superconducting qubits

Shi, Pan, Jiahao Yuan, Fei Yan +1 more

The advancement of scalable quantum information processing relies on the accurate and parallel manipulation of a vast number of qubits, potentially reaching into the millions. Superconducting qubits, traditionally controlled through individual circuitry, currently face a formidable scalability challenge due to the excessive use of wires. This challenge is nearing a critical point where it might soon surpass the capacities of on-chip routing, I/O packaging, testing platforms, and economically feasible solutions. Here we introduce a multiplexed control scheme that efficiently utilizes shared control lines for operating multiple qubits and couplers. By integrating quantum hardware-software co-design, our approach utilizes advanced techniques like frequency multiplexing and individual tuning. This enables simultaneous and independent execution of single- and two-qubit gates with significantly simplified wiring. This scheme has the potential to diminish the number of control lines by one to two orders of magnitude in the near future, thereby substantially enhancing the scalability of superconducting quantum processors.

arXiv:2312.06911•Dec 12, 2023•3 citations

High-fidelity iSWAP gate with Double Transmon Coupler

Tarush Tiwari, Sudhir K. Sahu, Guilhem Ribeill +6 more

Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.

quant-pharXiv:2604.27080•May 1, 2026•0 citations

System-Level Design of Scalable Fluxonium Quantum Processors with Double-Transmon Couplers

Guo Xuan Chan, Wangwei Lan, Tenghui Wang +3 more

Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.

quant-pharXiv:2604.26373•Apr 30, 2026•0 citations

Realization of High-Fidelity CZ Gate Based on a Double-Transmon Coupler

Rui Li, Kentaro Kubo, Yinghao Ho +3 more

Striving for higher gate fidelity is crucial not only for enhancing existing noisy intermediate-scale quantum devices, but also for unleashing the potential of fault-tolerant quantum computation through quantum error correction. A recently proposed theoretical scheme, the double-transmon coupler (DTC), aims to achieve both suppressed residual interaction and a fast high-fidelity two-qubit gate simultaneously, particularly for highly detuned qubits. Harnessing the state-of-the-art fabrication techniques and a model-free pulse-optimization process based on reinforcement learning, we translate the theoretical DTC scheme into reality, attaining fidelities of 99.90% for a controlled- Z gate and 99.98% for single-qubit gates. The performance of the DTC scheme demonstrates its potential as a competitive building block for superconducting quantum processors. Published by the American Physical Society 2024

arXiv:2402.18926•Physical Review X•Nov 21, 2024•44 citations

Modular Tunable Coupler for Superconducting Circuits

Daniel L. Campbell, Archana Kamal, Leonardo Ranzani +2 more

The development of modular and versatile quantum interconnect hardware is a key next step in the scaling of quantum information platforms to larger size and greater functionality. For superconducting quantum systems, fast and well-controlled tunable circuit couplers will be paramount for achieving high-fidelity and resource-efficient connectivity, whether for performing two-qubit gate operations, encoding or decoding a quantum data bus, or interfacing across modalities. Here we propose a versatile and internally tunable double-transmon coupler (DTC) architecture that implements tunable coupling via flux-controlled interference in a three-junction dc superconducting quantum interference device. Crucially, the DTC possesses an internally defined zero-coupling state that is independent of the coupled data qubits or circuit resonators. This makes it particularly attractive as a modular and versatile design element for realizing fast and robust linear coupling in several applications such as high-fidelity two-qubit gate operations, qubit readout, and quantum bus interfacing.

arXiv:2207.06607•Physical Review Applied•Jun 13, 2023•27 citations
Precise control of superconducting qubits is essential for advancing both quantum simulation and quantum error correction. Recently, transmon qubit systems employing the single-transmon coupler (STC) scheme have demonstrated high-fidelity single- and two-qubit gate operations by dynamically tuning the effective coupling between qubits. However, the integration of STCs increases the number of control lines, thereby posing a significant bottleneck for chip routing and scalability. To address this challenge, we propose a robust control line multiplexing scheme based on a double-transmon coupler (DTC) architecture, which enables shared coupler control lines to substantially reduce wiring complexity. Moreover, we experimentally verify that this multiplexed configuration efficiently suppresses undesirable static ZZZZZZ coupling while maintaining accurate control over two-qubit gate operations. We further demonstrate the feasibility of the architecture through two distinct gate implementations: a fast coupler ZZZ-control-based CZ gate and a parametric iSWAP gate. To validate the practical applicability of this multiplexing approach in quantum circuits, we prepare Bell and three-qubit GHZ states using the proposed scheme with fidelity exceeding 99% and 96%, respectively. This multiplexed DTC architecture offers significant potential to minimize wiring overhead in two-dimensional qubit arrays, thereby greatly enhancing the scalability of superconducting quantum processors.
Tunable couplers in superconducting quantum computers have enabled fast and accurate two-qubit gates, with reported high fidelities over 99% in various architectures and gate-implementation schemes. However, there are few tunable couplers whose performance in multiqubit systems is clarified, except for the most widely used one: single-transmon coupler (STC). Achieving similar accuracy to isolated two-qubit systems remains challenging due to various undesirable couplings but is necessary for scalability. In this work, we numerically analyze a system of three fixed-frequency qubits coupled via two double-transmon couplers (DTCs) where nearest-neighbor qubits are highly detuned and also next-nearest-neighbor ones are nearly resonant. The DTC is a recently proposed tunable coupler, which consists of two fixed-frequency transmons coupled through a common loop with an additional Josephson junction. We find that the DTC cannot only reduce undesired residual couplings sufficiently, as well as in isolated two-qubit systems, but also enables implementations of 30-ns CZ gates and individual and simultaneous 10-ns π / 2 pulses with fidelities over 99.99%. For comparison, we also investigate the system where the DTCs are replaced by the STCs. The results show that the DTC outperforms the STC in terms of both residual coupling suppression and gate accuracy in the above systems. From these results, we expect that the DTC architecture is promising for realizing high-performance, scalable superconducting quantum computers. Published by the American Physical Society 2024
The advancement of scalable quantum information processing relies on the accurate and parallel manipulation of a vast number of qubits, potentially reaching into the millions. Superconducting qubits, traditionally controlled through individual circuitry, currently face a formidable scalability challenge due to the excessive use of wires. This challenge is nearing a critical point where it might soon surpass the capacities of on-chip routing, I/O packaging, testing platforms, and economically feasible solutions. Here we introduce a multiplexed control scheme that efficiently utilizes shared control lines for operating multiple qubits and couplers. By integrating quantum hardware-software co-design, our approach utilizes advanced techniques like frequency multiplexing and individual tuning. This enables simultaneous and independent execution of single- and two-qubit gates with significantly simplified wiring. This scheme has the potential to diminish the number of control lines by one to two orders of magnitude in the near future, thereby substantially enhancing the scalability of superconducting quantum processors.
Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.
Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.
Striving for higher gate fidelity is crucial not only for enhancing existing noisy intermediate-scale quantum devices, but also for unleashing the potential of fault-tolerant quantum computation through quantum error correction. A recently proposed theoretical scheme, the double-transmon coupler (DTC), aims to achieve both suppressed residual interaction and a fast high-fidelity two-qubit gate simultaneously, particularly for highly detuned qubits. Harnessing the state-of-the-art fabrication techniques and a model-free pulse-optimization process based on reinforcement learning, we translate the theoretical DTC scheme into reality, attaining fidelities of 99.90% for a controlled- Z gate and 99.98% for single-qubit gates. The performance of the DTC scheme demonstrates its potential as a competitive building block for superconducting quantum processors. Published by the American Physical Society 2024
The development of modular and versatile quantum interconnect hardware is a key next step in the scaling of quantum information platforms to larger size and greater functionality. For superconducting quantum systems, fast and well-controlled tunable circuit couplers will be paramount for achieving high-fidelity and resource-efficient connectivity, whether for performing two-qubit gate operations, encoding or decoding a quantum data bus, or interfacing across modalities. Here we propose a versatile and internally tunable double-transmon coupler (DTC) architecture that implements tunable coupling via flux-controlled interference in a three-junction dc superconducting quantum interference device. Crucially, the DTC possesses an internally defined zero-coupling state that is independent of the coupled data qubits or circuit resonators. This makes it particularly attractive as a modular and versatile design element for realizing fast and robust linear coupling in several applications such as high-fidelity two-qubit gate operations, qubit readout, and quantum bus interfacing.