Quantum communication holds the promise of achieving long-distance secure message transmission by exploiting quantum entanglement between remote locations. Quantum repeaters are indispensable to the realization of quantum networks for long-distance quantum communication. Similar to its classical analogue, a good quantum repeater should be able to compensate channel attenuation with a quantum amplifier, and to combat channel distortion through a quantum equaliser. This quantum repeater should also operate by an efficient and robust protocol. The first part of this project researches the continuous mode operation of a noiseless linear amplifier (NLA). We develop a dynamical model to describe the operation of the nondeterministic NLA in the regime of continuous-mode inputs. Both the quantum scissor based NLA and the photon addition-subtraction based NLA are analysed. Simulation results are also presented to confirm theoretical analysis. The second part proposes two quantum protocols. An atomic ensemble based quantum protocol is developed to generate distributed W-states. These generated distributed W-states could be considered as an entanglement resource between more than two distant nodes and would be useful in quantum communication and distributed quantum computation in the future. We also propose a protocol by which quantum key distribution can be achieved deterministically between multiple nodes.This deterministic quantum key distribution scheme may be used to guarantee secure communication for wireless sensor networks and Internet of Things. The last project analyses distortion of quantum channels and develops physically realisable modules to combat it. The minimum phase channel and non-minimum phase all pass channel are discussed separately.
Quantum communication holds the promise of achieving long-distance secure message transmission by exploiting quantum entanglement between remote locations. Quantum repeaters are indispensable to the realization of quantum networks for long-distance quantum communication. Similar to its classical analogue, a good quantum repeater should be able to compensate channel attenuation with a quantum amplifier, and to combat channel distortion through a quantum equaliser. This quantum repeater should also operate by an efficient and robust protocol. The first part of this project researches the continuous mode operation of a noiseless linear amplifier (NLA). We develop a dynamical model to describe the operation of the nondeterministic NLA in the regime of continuous-mode inputs. Both the quantum scissor based NLA and the photon addition-subtraction based NLA are analysed. Simulation results are also presented to confirm theoretical analysis. The second part proposes two quantum protocols. An atomic ensemble based quantum protocol is developed to generate distributed W-states. These generated distributed W-states could be considered as an entanglement resource between more than two distant nodes and would be useful in quantum communication and distributed quantum computation in the future. We also propose a protocol by which quantum key distribution can be achieved deterministically between multiple nodes.This deterministic quantum key distribution scheme may be used to guarantee secure communication for wireless sensor networks and Internet of Things. The last project analyses distortion of quantum channels and develops physically realisable modules to combat it. The minimum phase channel and non-minimum phase all pass channel are discussed separately.
Optical telecommunication is at the heart of today's internet and is currently enabled by the transmission of intense optical signals between remote locations. As we look to the future of telecommunication, quantum mechanics promise new ways to be able to transmit and process that information. Demonstrations of quantum key distribution and quantum teleportation using multiphoton states have been performed, but only over ranges limited to a few hundred kilometers. To go beyond this, we need repeaters that are compatible with these quantum multiphoton continuous-variable pulses. Here we present a design for continuous-variable quantum repeaters that can distribute entangled and pure two-mode squeezed states over arbitrarily long distances with a success probability that scales only polynomially with distance. The proposed quantum repeater is composed from several basic known building blocks such as non-Gaussian operations for entanglement distillation and an iterative Gaussification protocol (for retaining the Gaussian character of the final state), but complemented with a heralded non-Gaussian entanglement swapping protocol, which allows us to avoid extensive iterations of quantum Gaussification. We characterize the performance of this scheme in terms of key rates for quantum key distribution and show a secure key can be generated over thousands of kilometers.
As children, whispering into the ear of a friend in the presence of others allows us to pass a secret without interception, and forms one of the simplest attempts at secret communications we can employ. However, sending secret messages becomes deeply nontrivial over long distances. \n \nA solution for two parties to communicate securely is to encrypt and decrypt a message with two identical strings of bits, one for each party. In this case, the security of the encrypted message is provable and does not rely on assumptions on computational power. Quantum theory provides a clear solution for the initial distribution of these identical bit strings through Quantum Key Distribution. However, once long distances are involved, the corresponding loss involved in direct transmission ruins the effectiveness of quantum key distribution by reducing the effective rate exponentially with the distance. \n \nTo circumvent the losses involved in direct transmission, quantum repeater architectures have been proposed. We present our contributions towards three aspects of quantum repeater systems in this thesis. We ensure conditions for implementing quantum repeaters with atomic ensembles, explore the option of optomechanical systems for implementing quantum repeaters and verify the success of completed quantum repeater protocols. \n \nIn the first part of this thesis, we show how we can ensure conditions for the successful implementation of quantum repeater systems with atomic ensembles. These quantum repeater systems are formed with 1-dimensional networks, where the nodes are made up of quantum memories connected by means of single photons. This requires memories that are highly efficient. Also, if quantum repeater systems are implemented with hybrid resources, tunable photon waveforms will be desirable. We propose a protocol to implement quantum memories with atomic ensembles using a clear recipe to optimise the efficiency. We also demonstrate that a cold ensemble of Rubidium-87 can act as an efficient tunable source of single photons, along with flexibility in the produced temporal shapes. \n \nNext, we show how we can explore alternative options for the nodes of quantum repeater systems. We focus on optomechanical oscillators, and recognise that they can also be used as quantum memories. We present a witness to certify that this memory successfully operates in the quantum regime. \n \nFinally, we focus on the verification of successfully implemented quantum repeater protocols. This verification will be essential for certifying that quantum repeater systems operate as instructed. We use only local homodyne measurements to witness the success of the network, and find that the witness is robust to loss. \n \nWe thus present distinct contributions towards three important aspects of quantum repeater systems. As far as a full-fledged quantum repeater system might seem to be right now, we have faith that our work brings the field of quantum-enabled secure communications forward.
Future quantum networks will enable the realisation of a large family of quantum protocols, hence allowing for implementation of various tasks ranging from quantum cryptography through quantum computing to quantum metrology.In this thesis we analyse and develop the building blocks of quantum repeater networks.These networks consist of quantum repeater nodes, which are equipped with quantum memories enabling storage of quantum information.The repeater nodes are connected using optical fibres that enable for the transmission of photonic quantum signals between the repeater nodes.We specifically focus on the two building blocks: remote entanglement generation and entanglement distillation.We then investigate various proof of principle quantum repeater schemes used for generating shared secret key between distant parties.The repeater schemes that we consider utilise one to three memory nodes capable of generating memory-photon entanglement.Finally, we introduce a novel framework for investigating a foundational aspect in the use of quantum communication related to the uncertainty principle.Efficient remote entanglement generation is an indispensable building block of most near-term quantum repeater networks.In this thesis we consider various remote entanglement generation schemes that permit multiplexing, which aims at increasing the throughput of this procedure.We find that for the specific schemes that are suitable for platforms with a single communication qubit and multiple memory qubits, the performance of the multiplexing approach is strongly dependent on the time it takes to perform local operations within the memory nodes.Entanglement distillation enables for filtering out the noise from imperfect entangled states using only local operations and classical communication.Using a general framework for optimising such schemes, which we have developed, we have proven optimality of specific generic and experimentally relevant distillation schemes.We have developed a general framework for optimising such schemes, which we have used to prove optimality of various generic and experimentally relevant distillation schemes.In designing proof of principle quantum repeater schemes we assume an informationtheoretic approach, which enables us to assess their performance in a hardware-agnostic way.We find that all the schemes that we consider can prove useful in specific parameter regimes for the nitrogen-vacancy centre platform.Moreover, we find that one scheme which has already been realised experimentally in the context of remote entanglement generation, is expected to significantly outperform every possible system based on direct communication without repeaters.However, our analysis shows that encapsulating the nitrogen-vacancy centres in optical cavities for the enhancement of the emission rates is a necessary requirement for such a successful demonstration of the first proofof-principle quantum repeater.xi xii SUMMARY Finally, we investigate the quantum uncertainty principle which is a fundamental feature of quantum mechanics, allowing for security in many quantum cryptographic protocols.We find that in a particular scenario, relevant from the perspective of quantum key distribution, a significant part of the observed uncertainty is in fact due to lack of information rather than intrinsic.If the eavesdropper could access that information, she would be able to much better, or in some cases even with certainty, guess the value of the raw bit of the generated key.
Quantum communication enables various technological possibilities that are hard or impossible with classical communication. These include secure distribution of keys, transfer of quantum information and distributed quantum computation and sensing. Quantum communication relies on the ability to transmit a quantum state over some distance. Exponential photon loss from fibre inevitably limits the distance one would be able to achieve this over and therefore make use of these promising new technologies.Quantum repeaters have been proposed as a solution to this problem. Elementary repeater protocols involve dividing the channel into smaller segments with repeater nodes, distributing entanglement between these nodes and then performing swapping operations to connect entangled pairs and purification to correct operation errors. In the years since these elementary protocols, quantum repeaters have been through extensive theoretical improvements including utilising the benefits of quantum error correction to improve efficiency.However, the vast majority of these protocols are for discrete encodings of quantum information. There is significant interest in using continuous variable encodings of quantum information for quantum communication applications. This is motivated in part by the ease of generating, manipulating and detecting quantum states and additionally the increased compatibility with existing infrastructure. In this thesis we present one of the first quantum repeater protocols for continuous variable encodings of quantum information.The continuous variable quantum repeater we present in this thesis is based on concatenated error correction protocols that work to correct loss on any optical field state. We thoroughly investigate operation of this error correction protocol including the trade-offs associated with real implementations, various modifications to the error correction protocol as well as whether it can be implemented with current technology.We illustrate how these error correction protocols may be structured to form a quantum repeater that inhibits the exponential photon loss problem with a resource cost that scales polynomially with distance. We show that our continuous variable repeater is able to beat the fundamental bound on quantum communication without a repeater. Finally, we compare the performance of our first generation continuous variable repeater to existing first generation discrete variable protocols.
In present-day quantum communications, one of the main problems is the lack of a quantum repeater design that can simultaneously secure high rates and long distances. Recent literature has established the end-to-end capacities that are achievable by the most general protocols for quantum and private communication within a quantum network, encompassing the case of a quantum repeater chain. However, whether or not a physical design exists to approach such end-to-end capacities remains a challenging objective. Driven by this motivation, in this work we put forward a design for continuous-variable quantum repeaters and show that it can actually achieve the feat. We also show that even in a noisy regime, our rates surpass the Pirandola-Laurenza-Ottaviani-Banchi bound. Our repeater setup is developed upon using noiseless linear amplifiers, quantum memories, and continuous-variable Bell measurements. Furthermore, we propose a nonideal model for continuous-variable quantum memories that we make use of in our design. We then show that potential quantum communication rates would deviate from the theoretical capacities, as one would expect, if the quantum link is too noisy, and/or if low-quality quantum memories and amplifiers are employed.
Quantum communications enable secure key transmission and entanglement distribution, but their rates and maximum transmission distances are limited due to the losses and noise introduced by quantum channels. Various techniques have been developed to address these limitations, tailored to the platform and the nature of the decoherence. In this thesis, we explore ways to enhance the performance of quantum communications, with a particular focus on increasing the key rates and transmission distances in quantum key distribution (QKD), a method that leverages quantum mechanics to securely share keys between trusted parties. Additionally, we aim to improve the purity of entangled states shared between two parties, contributing to broader advancements in quantum communications. We begin by introducing a software-enhanced continuous-variable QKD (CV-QKD) protocol, where keys are encoded onto the phase and amplitude degrees of the optical field. This protocol enhances both transmission distance and key rates through a post-selection method employing arbitrary filters, experimentally demonstrated on two different platforms. Its adaptability makes it highly promising, as it can be implemented on existing CV-QKD platforms and dynamically optimises key rates for rapidly changing channels. We then present a protocol for the pure-loss channel leveraging quantum repeaters to mitigate the channel losses by segmenting the total communication distance into smaller, more manageable intervals. This repeater-like protocol introduces a more efficient entanglement-swapping measurement at the repeater station than the state-of-the-art twin-field protocols. Instead of polarisation encoding, our protocol relies on encoding keys in the photon-number basis, optimising the states to achieve the highest key rates for each distance. Notably, this protocol shows strong potential for improving long-distance quantum communication by surpassing the capacity of the direct communication channel at a shorter distance than the existing repeater protocols such as twin-field QKD while achieving an overall higher transmission distance. Finally, in this thesis, we demonstrate that for the Pauli-dephasing channel, placing a node in the middle of the quantum channel to perform a Bell-state measurement as an entanglement-swapping operation does not result in improved key rates, even with reduced decoherence. As a result, we propose an entanglement purification protocol that refines a larger set of noisy entangled states into a smaller set of high-fidelity ones using local operations and classical communication. This purification protocol builds upon earlier purification methods, extending their application from two Bell pairs to any number of Bell pairs and thereby achieving the capacity of the dephasing channel. Through numerous recursive iterations, it produces near-perfect Bell pairs, making it well-suited for quantum repeaters and correcting dephasing errors in quantum computers.