Quantum communication enables various technological possibilities that are hard or impossible with classical communication. These include secure distribution of keys, transfer of quantum information and distributed quantum computation and sensing. Quantum communication relies on the ability to transmit a quantum state over some distance. Exponential photon loss from fibre inevitably limits the distance one would be able to achieve this over and therefore make use of these promising new technologies.Quantum repeaters have been proposed as a solution to this problem. Elementary repeater protocols involve dividing the channel into smaller segments with repeater nodes, distributing entanglement between these nodes and then performing swapping operations to connect entangled pairs and purification to correct operation errors. In the years since these elementary protocols, quantum repeaters have been through extensive theoretical improvements including utilising the benefits of quantum error correction to improve efficiency.However, the vast majority of these protocols are for discrete encodings of quantum information. There is significant interest in using continuous variable encodings of quantum information for quantum communication applications. This is motivated in part by the ease of generating, manipulating and detecting quantum states and additionally the increased compatibility with existing infrastructure. In this thesis we present one of the first quantum repeater protocols for continuous variable encodings of quantum information.The continuous variable quantum repeater we present in this thesis is based on concatenated error correction protocols that work to correct loss on any optical field state. We thoroughly investigate operation of this error correction protocol including the trade-offs associated with real implementations, various modifications to the error correction protocol as well as whether it can be implemented with current technology.We illustrate how these error correction protocols may be structured to form a quantum repeater that inhibits the exponential photon loss problem with a resource cost that scales polynomially with distance. We show that our continuous variable repeater is able to beat the fundamental bound on quantum communication without a repeater. Finally, we compare the performance of our first generation continuous variable repeater to existing first generation discrete variable protocols.
Quantum communication enables various technological possibilities that are hard or impossible with classical communication. These include secure distribution of keys, transfer of quantum information and distributed quantum computation and sensing. Quantum communication relies on the ability to transmit a quantum state over some distance. Exponential photon loss from fibre inevitably limits the distance one would be able to achieve this over and therefore make use of these promising new technologies.Quantum repeaters have been proposed as a solution to this problem. Elementary repeater protocols involve dividing the channel into smaller segments with repeater nodes, distributing entanglement between these nodes and then performing swapping operations to connect entangled pairs and purification to correct operation errors. In the years since these elementary protocols, quantum repeaters have been through extensive theoretical improvements including utilising the benefits of quantum error correction to improve efficiency.However, the vast majority of these protocols are for discrete encodings of quantum information. There is significant interest in using continuous variable encodings of quantum information for quantum communication applications. This is motivated in part by the ease of generating, manipulating and detecting quantum states and additionally the increased compatibility with existing infrastructure. In this thesis we present one of the first quantum repeater protocols for continuous variable encodings of quantum information.The continuous variable quantum repeater we present in this thesis is based on concatenated error correction protocols that work to correct loss on any optical field state. We thoroughly investigate operation of this error correction protocol including the trade-offs associated with real implementations, various modifications to the error correction protocol as well as whether it can be implemented with current technology.We illustrate how these error correction protocols may be structured to form a quantum repeater that inhibits the exponential photon loss problem with a resource cost that scales polynomially with distance. We show that our continuous variable repeater is able to beat the fundamental bound on quantum communication without a repeater. Finally, we compare the performance of our first generation continuous variable repeater to existing first generation discrete variable protocols.
Quantum repeaters are a well known method to overcome the exponential photon loss scaling that quantum states acquire as they are transmitted over long distances. While repeaters for discrete variable encodings of quantum information have existed for some time, novel approaches for continuous variable encoding quantum repeaters have recently been proposed. In this work, we present a method of utilising a discrete variable repeater protocol to distribute continuous variable states and then utilize this to compare the rates of continuous variable entanglement distribution between first generation continuous and discrete variable repeaters.
Quantum communications enable secure key transmission and entanglement distribution, but their rates and maximum transmission distances are limited due to the losses and noise introduced by quantum channels. Various techniques have been developed to address these limitations, tailored to the platform and the nature of the decoherence. In this thesis, we explore ways to enhance the performance of quantum communications, with a particular focus on increasing the key rates and transmission distances in quantum key distribution (QKD), a method that leverages quantum mechanics to securely share keys between trusted parties. Additionally, we aim to improve the purity of entangled states shared between two parties, contributing to broader advancements in quantum communications. We begin by introducing a software-enhanced continuous-variable QKD (CV-QKD) protocol, where keys are encoded onto the phase and amplitude degrees of the optical field. This protocol enhances both transmission distance and key rates through a post-selection method employing arbitrary filters, experimentally demonstrated on two different platforms. Its adaptability makes it highly promising, as it can be implemented on existing CV-QKD platforms and dynamically optimises key rates for rapidly changing channels. We then present a protocol for the pure-loss channel leveraging quantum repeaters to mitigate the channel losses by segmenting the total communication distance into smaller, more manageable intervals. This repeater-like protocol introduces a more efficient entanglement-swapping measurement at the repeater station than the state-of-the-art twin-field protocols. Instead of polarisation encoding, our protocol relies on encoding keys in the photon-number basis, optimising the states to achieve the highest key rates for each distance. Notably, this protocol shows strong potential for improving long-distance quantum communication by surpassing the capacity of the direct communication channel at a shorter distance than the existing repeater protocols such as twin-field QKD while achieving an overall higher transmission distance. Finally, in this thesis, we demonstrate that for the Pauli-dephasing channel, placing a node in the middle of the quantum channel to perform a Bell-state measurement as an entanglement-swapping operation does not result in improved key rates, even with reduced decoherence. As a result, we propose an entanglement purification protocol that refines a larger set of noisy entangled states into a smaller set of high-fidelity ones using local operations and classical communication. This purification protocol builds upon earlier purification methods, extending their application from two Bell pairs to any number of Bell pairs and thereby achieving the capacity of the dephasing channel. Through numerous recursive iterations, it produces near-perfect Bell pairs, making it well-suited for quantum repeaters and correcting dephasing errors in quantum computers.
Quantum repeaters are used to overcome the exponential photon loss scaling that quantum states acquire as they are transmitted over long distances. While repeaters for discrete-variable encodings of quantum information have existed for some time, approaches for continuous-variable encoding quantum repeaters have only recently been proposed. In this work, we present a method of using a discrete-variable repeater protocol to distribute continuous-variable states and utilize it to compare the rates of continuous-variable entanglement distribution between first-generation continuous- and discrete-variable quantum repeaters. Such a comparison allows us to begin to benchmark the two quite different approaches.
Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.
Optical telecommunication is at the heart of today's internet and is currently enabled by the transmission of intense optical signals between remote locations. As we look to the future of telecommunication, quantum mechanics promise new ways to be able to transmit and process that information. Demonstrations of quantum key distribution and quantum teleportation using multiphoton states have been performed, but only over ranges limited to a few hundred kilometers. To go beyond this, we need repeaters that are compatible with these quantum multiphoton continuous-variable pulses. Here we present a design for continuous-variable quantum repeaters that can distribute entangled and pure two-mode squeezed states over arbitrarily long distances with a success probability that scales only polynomially with distance. The proposed quantum repeater is composed from several basic known building blocks such as non-Gaussian operations for entanglement distillation and an iterative Gaussification protocol (for retaining the Gaussian character of the final state), but complemented with a heralded non-Gaussian entanglement swapping protocol, which allows us to avoid extensive iterations of quantum Gaussification. We characterize the performance of this scheme in terms of key rates for quantum key distribution and show a secure key can be generated over thousands of kilometers.
Long-distance quantum communication faces significant challenges due to photon loss and operational errors in fiber optic channels. Quantum repeaters (QRs) offer a promising solution by extending the communication range and enabling secure exchange of quantum information over continental distances. This article provides an overview of the three generations of QRs, comparing their technological requirements and challenges. We introduce the basic techniques, such as entanglement swapping, distillation, and error correction, and discuss their relevance to each generation of QRs. In addition, we present a future direction that integrates superconducting qubits with optical fibers, enabled by recent advances in microwave-optical transduction. This new hybrid architecture offers promising prospects for scalable and efficient quantum networks. It is also applicable in quantum key distribution protocols, such as E91.