Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Optical Transition Edge Sensors: Wavelength Dependence of System Detection Efficiency

K. Hattori, Shuichiro Inoue, R. Kobayashi, K. Niwa, T. Numata, Daiji Fukuda

Published Jul 1, 2018• 3 citations
Publisher

Abstract

Optical transition edge sensors (TESs) which can resolve an energy of a single photon have proven desirable in quantum information and biology. TESs can provide spectra ranging from near-infrared to visible regions, and have the potential to reveal new phenomena in biology. To obtain reliable spectra, wavelength dependence of the system detection efficiency should be calibrated. The dependence is due to a cavity structure of the detector, consisting of an anti-reflection coating and a mirror. We will present a calibration using a supercontinuum laser and acousto-optic tunable filters (AOTF).

DOI
10.1109/cpem.2018.8501179

Related papers

Optical Transition-Edge Sensors: Dependence of System Detection Efficiency on Wavelength

K. Hattori, Shuichiro Inoue, Ryo Kobayashi +3 more

Optical transition-edge sensors (TESs) that can resolve the energy of a single photon have been proven useful in quantum information and biology. TESs can provide spectra ranging from near-infrared to visible regions and have the potential to reveal new phenomena in biology. In this paper, we have investigated the responses of TESs to photons at near-infrared and visible wavelengths, from 450 to 1000 nm in 10-nm increments using a supercontinuum laser and a tunable bandpass filter, which converted the multichromatic light source into monochromatic light. The system detection efficiency of an optical TES optimized for photon detection at 950 nm was nearly 100% at some wavelengths and was more than 10% for the overall bandwidth. We found that the detector responses strongly depended on the wavelengths. A spectrum of the filtered light at shorter wavelengths was more likely to show a second peak with energy lower than that of the primary peak.

IEEE Transactions on Instrumentation and Measurement•Dec 11, 2018•6 citations

Superconducting transition-edge sensors optimized for high-efficiency photon-number resolving detectors

Adriana E. Lita, Brice Calkins, Lenson A. Pellouchoud +2 more

Superconducting photon detectors have emerged as a powerful new option for detecting single photons. System detection efficiency that incorporates the quantum efficiency of the device and system losses is one of the most important single-photon detector performance metrics for quantum information applications. Superconducting transition-edge sensors (TESs) are microcalorimeters that have the ability of distinguishing single photons with negligible dark counts. In addition, TESs are capable of directly measuring the photon number in a pulse of light. We have achieved near-unity system detection efficiency with TESs at particular wavelengths in the near-infrared by using multilayer structures that enhance the absorption of light into the active device material. We describe the design of the multilayer structure enabling high detection efficiency TESs including issues and requirements for obtaining detection efficiency values higher than 99 %. We describe the device fabrication and finally, show recent results of devices optimized for high detection efficiency using the multilayer structure.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 20, 2010•51 citations

Counting near-infrared single-photons with 95% efficiency

Adriana E. Lita, Aaron Miller, Sae Woo Nam

Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.

Optics Express•Jan 1, 2008•733 citations

Optimizing Optical TESs for High-Efficiency Multimode Fiber Coupling

Federico Malnati, Greta Andrini, Hobey Garrone +6 more

Transition-Edge Sensors (TESs) are superconducting photon detectors offering high quantum efficiency, energy resolution, and photon-number discrimination, making them attractive for quantum sensing applications. We report on the design, fabrication, and characterization of a Ti/Au/Ti TES optimized for multimode fiber coupling in NV-center experiments. The device integrates a bi-layer anti-reflective coating optimized for 700 nm, the emission wavelength range of NV centers in which we are interested. Optical characterization in a cryogenic setup demonstrated an energy resolution below 2 eV and photon-number resolution capability. A dedicated calibration setup was used to evaluate the system detection efficiency (SDE), yielding$0.85 \pm 0.02$. These results confirm the suitability of large-area TESs for efficient multimode fiber coupling and highlight their potential for improving the performance of NV-center-based quantum sensing experiments.

IEEE Transactions on Applied Superconductivity•Mar 23, 2026•0 citations

Development of High Detection Efficiency Titanium Transition-Edge Sensors for 1550 nm Single-Photon Detection

Xiaolong Xu, Peizhan Li, Carlo Pepe +10 more

Transition-edge sensors (TESs) have shown the capability of both energy resolution and resolving photon numbers. In this work, we present the fabrication and characterization of high detection efficiency Ti optical TESs with the critical temperatureTc= 213 mK and the photon-number resolving capability at telecommunication wavelength 1550 nm. The Ti superconducting film is prepared by a DC magnetron sputtering technique. An optical cavity comprised of 5-layers antireflection and 15-layers high-reflection Ta2O5/SiO2is enclosed with the Ti film by an ion beam assisted deposition method to improve detection efficiency, which brings the absorption of 99.74%. The energy resolution for the Ti TES with sensitive area 20 μm × 20 μm is 0.45 eV and the detection efficiency is 97% ± 1%.

IEEE Transactions on Applied Superconductivity•Jan 12, 2026•2 citations

Characterization of Optical Fast Transition-Edge Sensors With Optimized Fiber Coupling

L. Lolli, E. Taralli, M. Rajteri +2 more

Energy resolution (ΔE), recovery time (τeff), and quantum efficiency (QE) are some of the most important single photon-counting detector parameters. New applications in the quantum optics field place extreme demand on detector performances that go beyond the capabilities of established single-photon detectors. Unfortunately, it is hard to reach best results for all these parameters at the same time. Concerning transition-edge sensors (TESs) as single photon detectors, ΔEand τeffare directly and inversely proportional to the transition temperatureTc, respectively. Moreover, the geometrical optical coupling between illuminating fiber and detector, the device material and the characteristics of the optical cavity or the antireflection coating, drastically influence theQEand in some cases also the ΔE. Previous TESs fabricated by Istituto Nazionale di Ricerca Metrologica were characterized by very high energy resolution (0.18 eV) but high τeffand lowQE. In this work, we present a Ti/Au TES with higherTc(300 mK) that, using the optical alignment system implemented by AIST, shows an optimization of these important parameters, energy resolution of 0.26 eV, recovery time of 186 ns, and a quantum efficiency of 50% without using any optical structure deposited on the detector.

IEEE Transactions on Applied Superconductivity•Feb 20, 2013•25 citations
Optical transition edge sensors (TESs) which can resolve an energy of a single photon have proven desirable in quantum information and biology. TESs can provide spectra ranging from near-infrared to visible regions, and have the potential to reveal new phenomena in biology. To obtain reliable spectra, wavelength dependence of the system detection efficiency should be calibrated. The dependence is due to a cavity structure of the detector, consisting of an anti-reflection coating and a mirror. We will present a calibration using a supercontinuum laser and acousto-optic tunable filters (AOTF).
Optical transition-edge sensors (TESs) that can resolve the energy of a single photon have been proven useful in quantum information and biology. TESs can provide spectra ranging from near-infrared to visible regions and have the potential to reveal new phenomena in biology. In this paper, we have investigated the responses of TESs to photons at near-infrared and visible wavelengths, from 450 to 1000 nm in 10-nm increments using a supercontinuum laser and a tunable bandpass filter, which converted the multichromatic light source into monochromatic light. The system detection efficiency of an optical TES optimized for photon detection at 950 nm was nearly 100% at some wavelengths and was more than 10% for the overall bandwidth. We found that the detector responses strongly depended on the wavelengths. A spectrum of the filtered light at shorter wavelengths was more likely to show a second peak with energy lower than that of the primary peak.
Superconducting photon detectors have emerged as a powerful new option for detecting single photons. System detection efficiency that incorporates the quantum efficiency of the device and system losses is one of the most important single-photon detector performance metrics for quantum information applications. Superconducting transition-edge sensors (TESs) are microcalorimeters that have the ability of distinguishing single photons with negligible dark counts. In addition, TESs are capable of directly measuring the photon number in a pulse of light. We have achieved near-unity system detection efficiency with TESs at particular wavelengths in the near-infrared by using multilayer structures that enhance the absorption of light into the active device material. We describe the design of the multilayer structure enabling high detection efficiency TESs including issues and requirements for obtaining detection efficiency values higher than 99 %. We describe the device fabrication and finally, show recent results of devices optimized for high detection efficiency using the multilayer structure.
Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.
Transition-Edge Sensors (TESs) are superconducting photon detectors offering high quantum efficiency, energy resolution, and photon-number discrimination, making them attractive for quantum sensing applications. We report on the design, fabrication, and characterization of a Ti/Au/Ti TES optimized for multimode fiber coupling in NV-center experiments. The device integrates a bi-layer anti-reflective coating optimized for 700 nm, the emission wavelength range of NV centers in which we are interested. Optical characterization in a cryogenic setup demonstrated an energy resolution below 2 eV and photon-number resolution capability. A dedicated calibration setup was used to evaluate the system detection efficiency (SDE), yielding0.85±0.020.85 \pm 0.020.85±0.02. These results confirm the suitability of large-area TESs for efficient multimode fiber coupling and highlight their potential for improving the performance of NV-center-based quantum sensing experiments.
Transition-edge sensors (TESs) have shown the capability of both energy resolution and resolving photon numbers. In this work, we present the fabrication and characterization of high detection efficiency Ti optical TESs with the critical temperatureTc= 213 mK and the photon-number resolving capability at telecommunication wavelength 1550 nm. The Ti superconducting film is prepared by a DC magnetron sputtering technique. An optical cavity comprised of 5-layers antireflection and 15-layers high-reflection Ta2O5/SiO2is enclosed with the Ti film by an ion beam assisted deposition method to improve detection efficiency, which brings the absorption of 99.74%. The energy resolution for the Ti TES with sensitive area 20 μm × 20 μm is 0.45 eV and the detection efficiency is 97% ± 1%.
Energy resolution (ΔE), recovery time (τeff), and quantum efficiency (QE) are some of the most important single photon-counting detector parameters. New applications in the quantum optics field place extreme demand on detector performances that go beyond the capabilities of established single-photon detectors. Unfortunately, it is hard to reach best results for all these parameters at the same time. Concerning transition-edge sensors (TESs) as single photon detectors, ΔEand τeffare directly and inversely proportional to the transition temperatureTc, respectively. Moreover, the geometrical optical coupling between illuminating fiber and detector, the device material and the characteristics of the optical cavity or the antireflection coating, drastically influence theQEand in some cases also the ΔE. Previous TESs fabricated by Istituto Nazionale di Ricerca Metrologica were characterized by very high energy resolution (0.18 eV) but high τeffand lowQE. In this work, we present a Ti/Au TES with higherTc(300 mK) that, using the optical alignment system implemented by AIST, shows an optimization of these important parameters, energy resolution of 0.26 eV, recovery time of 186 ns, and a quantum efficiency of 50% without using any optical structure deposited on the detector.