Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Optimizing Optical TESs for High-Efficiency Multimode Fiber Coupling

Federico Malnati, Greta Andrini, Hobey Garrone, Elena Losero, E. Monticone, Carlo Pepe, P. Traina, Salvatore Virzì, M. Rajteri

Published Mar 23, 2026• 0 citations
Publisher

Abstract

Transition-Edge Sensors (TESs) are superconducting photon detectors offering high quantum efficiency, energy resolution, and photon-number discrimination, making them attractive for quantum sensing applications. We report on the design, fabrication, and characterization of a Ti/Au/Ti TES optimized for multimode fiber coupling in NV-center experiments. The device integrates a bi-layer anti-reflective coating optimized for 700 nm, the emission wavelength range of NV centers in which we are interested. Optical characterization in a cryogenic setup demonstrated an energy resolution below 2 eV and photon-number resolution capability. A dedicated calibration setup was used to evaluate the system detection efficiency (SDE), yielding$0.85 \pm 0.02$. These results confirm the suitability of large-area TESs for efficient multimode fiber coupling and highlight their potential for improving the performance of NV-center-based quantum sensing experiments.

DOI
10.1109/tasc.2026.3676549

Related papers

Development of High Detection Efficiency Titanium Transition-Edge Sensors for 1550 nm Single-Photon Detection

Xiaolong Xu, Peizhan Li, Carlo Pepe +10 more

Transition-edge sensors (TESs) have shown the capability of both energy resolution and resolving photon numbers. In this work, we present the fabrication and characterization of high detection efficiency Ti optical TESs with the critical temperatureTc= 213 mK and the photon-number resolving capability at telecommunication wavelength 1550 nm. The Ti superconducting film is prepared by a DC magnetron sputtering technique. An optical cavity comprised of 5-layers antireflection and 15-layers high-reflection Ta2O5/SiO2is enclosed with the Ti film by an ion beam assisted deposition method to improve detection efficiency, which brings the absorption of 99.74%. The energy resolution for the Ti TES with sensitive area 20 μm × 20 μm is 0.45 eV and the detection efficiency is 97% ± 1%.

IEEE Transactions on Applied Superconductivity•Jan 12, 2026•2 citations

Characterization of Optical Fast Transition-Edge Sensors With Optimized Fiber Coupling

L. Lolli, E. Taralli, M. Rajteri +2 more

Energy resolution (ΔE), recovery time (τeff), and quantum efficiency (QE) are some of the most important single photon-counting detector parameters. New applications in the quantum optics field place extreme demand on detector performances that go beyond the capabilities of established single-photon detectors. Unfortunately, it is hard to reach best results for all these parameters at the same time. Concerning transition-edge sensors (TESs) as single photon detectors, ΔEand τeffare directly and inversely proportional to the transition temperatureTc, respectively. Moreover, the geometrical optical coupling between illuminating fiber and detector, the device material and the characteristics of the optical cavity or the antireflection coating, drastically influence theQEand in some cases also the ΔE. Previous TESs fabricated by Istituto Nazionale di Ricerca Metrologica were characterized by very high energy resolution (0.18 eV) but high τeffand lowQE. In this work, we present a Ti/Au TES with higherTc(300 mK) that, using the optical alignment system implemented by AIST, shows an optimization of these important parameters, energy resolution of 0.26 eV, recovery time of 186 ns, and a quantum efficiency of 50% without using any optical structure deposited on the detector.

IEEE Transactions on Applied Superconductivity•Feb 20, 2013•25 citations

Development of Titanium-Based Transition-Edge Single-Photon Detector

Wen Zhang, Yue Geng, Zheng Wang +7 more

Superconducting transition-edge sensors (TESs), working as single-photon detectors with high quantum efficiency, low dark count rate, and photon number resolving capability, have been successfully used in quantum information experiments as well as astronomical transient object observations. Aiming to achieve high count rate, we are developing titanium-based superconducting TES single-photon detectors with a critical temperature of ~300 mK. Ti-based TESs with active area from 10 × 10 μm to 40 × 40 μm are first fabricated on silicon substrate coated with SiOx. The fabricated TES devices show a thermal conductance scaling with the active area and an effective time constant of ~4 μs from pulsed laser diode illumination. In order to get high quantum efficiency, we further design and fabricate a 1550-nm optical cavity based on dielectric mirror and antireflection layer, and study its absorption with an IR spectrometer. Ti TES devices on the dielectric mirror are then fabricated and the superconducting transition is measured.

IEEE Transactions on Applied Superconductivity•Mar 19, 2019•19 citations

Development of transition-edge sensors with high detection efficiency and fast response time

Takeshi Jodoi, Tetsuya Tsuruta, Takahiro Kikuchi +4 more

This study developed transition-edge sensors (TESs), which can achieve high detection efficiency and fast response time through an optimized optical cavity design. Their suitability for optical quantum information processing was confirmed. Furthermore, we developed TESs with two different sensitive area sizes—8 × 7 ţm2, 12 × 11 ţm2—and systematically evaluated their performances. By employing a titanium (Ti)/gold (Au) bilayer with a relatively high transition temperature as the sensitive element, we achieved a fast total response time—defined as the sum of the rise and decay times—of ∼160 ns. Furthermore, the optical cavity structure—predicted by simulations to achieve a photon absorptance of 99.9% at 1550 nm—yielded measured system detection efficiencies of 94.7% ± 0.62% for the 8 × 7 ţm2 TES and 99.0% ± 0.60% for the 12 × 11 ţm2 TES. Photon response measurements indicate an energy resolution of 0.20 eV for the 8 × 7 ţm2 TES and 0.37 eV for the 12 × 11 ţm2 TES. These results establish that the proposed TESs are the fastest and most efficient devices reported to date. The proposed devices offer a high detection efficiency, high count rate, and accurate photon-number resolution. Therefore, they provide a breakthrough platform for scalable fault-tolerant quantum information processing and enable significant advances in experimental quantum optics.

APL Photonics•Jul 1, 2026•0 citations

Fabrication and Characterization of Fast TESs With Small Area for Single Photon Counting

Chiara Portesi, E. Taralli, L. Lolli +2 more

Transition edge sensors (TESs) with high energy resolution (ΔE) at telecommunication wavelengths have been realized in the last years for application to experiments of quantum optics and quantum information. In these fields, lasers with repetition rate of the order of 50 MHz are usually applied and hence TES with recovery times lower than 20 ns would be desirable. To this aim, Ti TESs with area ranging between 1 μm × 1 μm and 2 μm × 2 μm are fabricated and characterized, to study the effects of the different sizes of active areas and critical temperatures on the energy resolutions and on the response times. Titanium TESs have been fabricated by thermal evaporation and Electron Beam Lithography technique on Si/SiN substrates, and they have been electrically and optically characterized. The experimental data have been analyzed and correlated to the detector geometrical parameters. The superconducting transitions of TESs with areas down to 1 μm × 1 μm result to be affected by lateral proximity effects of Nb wirings. Ti TESs with critical temperature of 470 mK show response time of about 150 ns and energy resolution of 0.16 eV.

IEEE Transactions on Applied Superconductivity•Nov 20, 2014•20 citations

Counting near-infrared single-photons with 95% efficiency

Adriana E. Lita, Aaron Miller, Sae Woo Nam

Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.

Optics Express•Jan 1, 2008•733 citations
Transition-Edge Sensors (TESs) are superconducting photon detectors offering high quantum efficiency, energy resolution, and photon-number discrimination, making them attractive for quantum sensing applications. We report on the design, fabrication, and characterization of a Ti/Au/Ti TES optimized for multimode fiber coupling in NV-center experiments. The device integrates a bi-layer anti-reflective coating optimized for 700 nm, the emission wavelength range of NV centers in which we are interested. Optical characterization in a cryogenic setup demonstrated an energy resolution below 2 eV and photon-number resolution capability. A dedicated calibration setup was used to evaluate the system detection efficiency (SDE), yielding0.85±0.020.85 \pm 0.020.85±0.02. These results confirm the suitability of large-area TESs for efficient multimode fiber coupling and highlight their potential for improving the performance of NV-center-based quantum sensing experiments.
Transition-edge sensors (TESs) have shown the capability of both energy resolution and resolving photon numbers. In this work, we present the fabrication and characterization of high detection efficiency Ti optical TESs with the critical temperatureTc= 213 mK and the photon-number resolving capability at telecommunication wavelength 1550 nm. The Ti superconducting film is prepared by a DC magnetron sputtering technique. An optical cavity comprised of 5-layers antireflection and 15-layers high-reflection Ta2O5/SiO2is enclosed with the Ti film by an ion beam assisted deposition method to improve detection efficiency, which brings the absorption of 99.74%. The energy resolution for the Ti TES with sensitive area 20 μm × 20 μm is 0.45 eV and the detection efficiency is 97% ± 1%.
Energy resolution (ΔE), recovery time (τeff), and quantum efficiency (QE) are some of the most important single photon-counting detector parameters. New applications in the quantum optics field place extreme demand on detector performances that go beyond the capabilities of established single-photon detectors. Unfortunately, it is hard to reach best results for all these parameters at the same time. Concerning transition-edge sensors (TESs) as single photon detectors, ΔEand τeffare directly and inversely proportional to the transition temperatureTc, respectively. Moreover, the geometrical optical coupling between illuminating fiber and detector, the device material and the characteristics of the optical cavity or the antireflection coating, drastically influence theQEand in some cases also the ΔE. Previous TESs fabricated by Istituto Nazionale di Ricerca Metrologica were characterized by very high energy resolution (0.18 eV) but high τeffand lowQE. In this work, we present a Ti/Au TES with higherTc(300 mK) that, using the optical alignment system implemented by AIST, shows an optimization of these important parameters, energy resolution of 0.26 eV, recovery time of 186 ns, and a quantum efficiency of 50% without using any optical structure deposited on the detector.
Superconducting transition-edge sensors (TESs), working as single-photon detectors with high quantum efficiency, low dark count rate, and photon number resolving capability, have been successfully used in quantum information experiments as well as astronomical transient object observations. Aiming to achieve high count rate, we are developing titanium-based superconducting TES single-photon detectors with a critical temperature of ~300 mK. Ti-based TESs with active area from 10 × 10 μm to 40 × 40 μm are first fabricated on silicon substrate coated with SiOx. The fabricated TES devices show a thermal conductance scaling with the active area and an effective time constant of ~4 μs from pulsed laser diode illumination. In order to get high quantum efficiency, we further design and fabricate a 1550-nm optical cavity based on dielectric mirror and antireflection layer, and study its absorption with an IR spectrometer. Ti TES devices on the dielectric mirror are then fabricated and the superconducting transition is measured.
This study developed transition-edge sensors (TESs), which can achieve high detection efficiency and fast response time through an optimized optical cavity design. Their suitability for optical quantum information processing was confirmed. Furthermore, we developed TESs with two different sensitive area sizes—8 × 7 ţm2, 12 × 11 ţm2—and systematically evaluated their performances. By employing a titanium (Ti)/gold (Au) bilayer with a relatively high transition temperature as the sensitive element, we achieved a fast total response time—defined as the sum of the rise and decay times—of ∼160 ns. Furthermore, the optical cavity structure—predicted by simulations to achieve a photon absorptance of 99.9% at 1550 nm—yielded measured system detection efficiencies of 94.7% ± 0.62% for the 8 × 7 ţm2 TES and 99.0% ± 0.60% for the 12 × 11 ţm2 TES. Photon response measurements indicate an energy resolution of 0.20 eV for the 8 × 7 ţm2 TES and 0.37 eV for the 12 × 11 ţm2 TES. These results establish that the proposed TESs are the fastest and most efficient devices reported to date. The proposed devices offer a high detection efficiency, high count rate, and accurate photon-number resolution. Therefore, they provide a breakthrough platform for scalable fault-tolerant quantum information processing and enable significant advances in experimental quantum optics.
Transition edge sensors (TESs) with high energy resolution (ΔE) at telecommunication wavelengths have been realized in the last years for application to experiments of quantum optics and quantum information. In these fields, lasers with repetition rate of the order of 50 MHz are usually applied and hence TES with recovery times lower than 20 ns would be desirable. To this aim, Ti TESs with area ranging between 1 μm × 1 μm and 2 μm × 2 μm are fabricated and characterized, to study the effects of the different sizes of active areas and critical temperatures on the energy resolutions and on the response times. Titanium TESs have been fabricated by thermal evaporation and Electron Beam Lithography technique on Si/SiN substrates, and they have been electrically and optically characterized. The experimental data have been analyzed and correlated to the detector geometrical parameters. The superconducting transitions of TESs with areas down to 1 μm × 1 μm result to be affected by lateral proximity effects of Nb wirings. Ti TESs with critical temperature of 470 mK show response time of about 150 ns and energy resolution of 0.16 eV.
Single-photon detectors operating at visible and near-infrared wavelengths with high detection efficiency and low noise are a requirement for many quantum-information applications. Superconducting transition-edge sensors (TESs) are capable of detecting visible and near-infrared light at the single-photon level and are capable of discriminating between one- and two-photon absorption events; however these capabilities place stringent design requirements on the TES heat capacity, thermometry, and optical detection efficiency. We describe the fabrication and evaluation of a fiber-coupled, photon-number-resolving TES detector optimized for absorption at 1550 and 1310 nm wavelengths. The measured system detection efficiency at 1556 nm is 95 % +/- 2 %, which to our knowledge is the highest system detection efficiency reported for a near-infrared single-photon detector.