We comprehensively simulate and experimentally demonstrate a novel approach to generate tunable electromagnetically induced transparency (EIT) in a fully integrated silicon photonics circuit. It can also generate tunable fast and slow light. The circuit is a single ring resonator with two integrated tunable reflectors inside, which form an embedded Fabry-Perot (FP) cavity inside the ring cavity. The mode of the FP cavity can be controlled by tuning the reflections using integrated thermo-optic tuners. Under correct tuning conditions, the interaction of the FP mode and the ring resonance mode will generate a Fano resonance and an EIT response. The extinction ratio and bandwidth of the EIT can be tuned by controlling the reflectors. Measured group delay proves that both fast light and slow light can be generated under different tuning conditions. A maximum group delay of 1100 ps is observed because of EIT. Pulse advance around 1200 ps is also demonstrated.
We comprehensively simulate and experimentally demonstrate a novel approach to generate tunable electromagnetically induced transparency (EIT) in a fully integrated silicon photonics circuit. It can also generate tunable fast and slow light. The circuit is a single ring resonator with two integrated tunable reflectors inside, which form an embedded Fabry-Perot (FP) cavity inside the ring cavity. The mode of the FP cavity can be controlled by tuning the reflections using integrated thermo-optic tuners. Under correct tuning conditions, the interaction of the FP mode and the ring resonance mode will generate a Fano resonance and an EIT response. The extinction ratio and bandwidth of the EIT can be tuned by controlling the reflectors. Measured group delay proves that both fast light and slow light can be generated under different tuning conditions. A maximum group delay of 1100 ps is observed because of EIT. Pulse advance around 1200 ps is also demonstrated.
We propose and demonstrate an on-chip coupling resonant system to generate electromagnetically induced transparency (EIT)-like effect and Fano resonance on silicon platform. It is composed of a microring resonator (MRR) and two cascaded Sagnac-loop mirrors (SLMs) assisted Fabry-Perot (FP) cavity on silicon-on-insulator. According to the coupling conditions of the MRR, two cases are studied theoretically. When the MRR is over coupling, EIT-like transmission can be observed. In contrast, Fano resonances can be generated by the condition of under coupling. In the experiment, the add-drop MRR is under coupling, leading to a sharp asymmetric line shape for Fano resonance. The resonance wavelength of the MRR can be dynamically tuned based on thermal-optic effects by tuning the micro-heater. The experiment results show Fano resonances with maximum extinction ratio (ER) of 23.22 dB and maximum slope rate (SR) of 252 dB/nm. Moreover, the wavelength of Fano resonance can be shifted widely with a tuning efficiency of 0.2335 nm/mW.
An all-pass microring-Bragg gratings (APMR-BG) based coupling resonant system is proposed and experimentally demonstrated to generate electromagnetically induced transparency (EIT)-like transmission for the first time. The coupling between two light path ways in the micro-ring resonator and the Fabry-Pérot (F-P) resonator formed by two sections of Bragg gratings gives rise to the EIT-like spectrum. This system has the advantage of a small footprint consisting of only one microring resonator and one bus waveguide with Bragg gratings. It also has a large fabrication tolerance as the overlap requirement between the resonance wavelengths of the microring and the F-P resonator is more relaxed. The two most important properties of the EIT-like transmission namely the insertion loss (IL) and the full-width-at-half-maximum (FWHM) have been analytically investigated by utilizing the specially developed model based on the transfer matrix method. The APMR-BG based coupling resonant system was fabricated on a silicon-on-insulator (SOI) platform. The EIT-like transmission with an extinction ratio (ER) of 12 dB, a FWHM of 0.077 nm and a quality factor (Q factor) of 20200 was achieved, which agree well with the simulated results based on our numerical model. A slow light with a group delay of 38 ps was also obtained.
Controlling the optical response of a medium through suitably tuned coherent electromagnetic fields is highly relevant in a number of potential applications, from all-optical modulators to optical storage devices. In particular, electromagnetically induced transparency (EIT) is an established phenomenon in which destructive quantum interference creates a transparency window over a narrow spectral range around an absorption line, which, in turn, allows to slow and ultimately stop light due to the anomalous refractive index dispersion. Here we report on the observation of a new form of both induced transparency and amplification of a weak probe beam in a strongly driven silicon photonic crystal resonator at room temperature. The effect is based on the oscillating temperature field induced in a nonlinear optical cavity, and it reproduces many of the key features of EIT while being independent of either atomic or mechanical resonances. Such thermo-optically induced transparency will allow a versatile implementation of EIT-analogs in an integrated photonic platform, at almost arbitrary wavelength of interest, room temperature and in a practical, low cost, and scalable system.
Tunable slow and fast light generation in a silicon-on-insulator (SOI) Fano resonator is proposed and experimentally demonstrated. The slow and fast light generation with symmetric and asymmetric coupling conditions of the Fano resonator is theoretically analyzed. Under a slightly imbalanced coupling condition, the two output ports of the Fano resonator could produce a fast light and a slow light, respectively. By utilizing the thermo-optic (TO) effect to change the phase difference of the two optical beams coupled into the resonator, the transition of fast and slow light can be realized at the fixed resonance wavelength. Experimental results show that a slow-to-fast transition (group delay from 0.852 to -1.057 ns) at one resonance wavelength, and a fast-to-slow transition (group delay from -0.22 to 0.867 ns) at another resonance wavelength are realized simultaneously by controlling the microheater to tune the phase difference.
Slow light technique has significant potential applications in many contemporary photonic device developments for integrated all-optical circuit, such as buffers, regenerators, switches and interferometers. In this paper, we present an efficient coupling mechanism of an electromagnetically induced transparency like (EIT-like) effect in an all-dielectric nano-metamaterial. This EIT-like effect is generated by destructive interference between a radiative Fabry-Perot (FP) mode and a dark waveguide (WG) mode, which is based on a combined structure of a dielectric grating and multilayer films. The dark WG mode is excited by guided mode of dielectric grating instead of radiative FP mode. In analogy to the molecular transition process, the FP mode, guided mode and WG mode are denoted by excited states of |1〉, |2〉 and |3〉. The two coupling pathways of the EIT-like effect in our metamaterial are |0〉 → |1〉 and |0〉 → |2〉 → |3〉 → |1〉, where |0〉 is the ground state. The simulated resonant wavelength of WG mode is consistent with theoretical result. We further confirm this EIT-like effect through a two-oscillator coupling analysis. We achieve a group refractive index of 913.6 by adjusting these two modes coupling of the EIT-like effect, which is useful for developing slow light device. This work provides a valuable solution to realize electromagnetically induced transparency in all-dielectric nanomaterial.
In this paper, we realize tunable Fano and electromagnetically induced transparency (EIT)-like resonances in the outputs of a nested feedback ring resonator. Compared with the traditional add-drop ring resonator, the feedback arm introduces interference between different resonance modes. Using coupled mode theory, we reveal that the output Fano resonances are the interference of discrete modes and continuum modes, whereas the EIT-like resonance only appears in the over-coupled state. We experimentally confirm the two effects using optical fiber ring resonators, finding that the Fano effect can be easily controlled with phase shifts in the feedback arm. Moreover, we achieve the double Fano resonance, which displays an ‘X’ type lineshape utilizing one ring resonator, predicting it to be a good candidate in wavelength monitor. The proposed simple configuration provides a platform to study Fano and EIT-like effect, which is useful in the optical filter, fast and slow light, optical switching, and optical sensing.