Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Experiments on Zeeman-based Electromagnetically Induced Transparency and Optical Sensing in Turbid Media

Bradley Worth

Published Jan 1, 2013• 0 citations
OpenAlex

Abstract

This thesis is divided into two parts.In Part 1 I describe the experimental setup used to investigate electromagnetically induced transparency (EIT).It is shown that impure polarization, stray magnetic fields and imperfect optical alignments cause broadening of the EIT signal and other spurious effects.A systematic approach to minimizing these undesired effects is described, which is shown to produce signals that are four to six times narrower than measurements taken prior to minimization.I conclude part 1 by outlining the progress made toward the production of "slow" light.In Part 2 I describe my earlier research, performed during the first year of my graduate studies, on optical sensing in turbid media.This research culminated in a first accurate measurement of the complex refractive index and in-situ particle sizing in highly scattering opaque media.

Related papers

Attenuation, Delay and Noise properties of light slowed by Electromagnetically Induced Transparency

Kerry B. Burke

Electromagnetically Induced Transparency is an effect that allows light to propagate through an otherwise opaque material. Due to the dispersion properties of the EIT system, it also slows the information carried on the sideband frequencies of a light beam. The effect can also be used to store information in an atomic medium. It was therefore proposed that EIT systems can be applied in optical cicuits, specifically with regard to quantum information processing where it is necessary to delay, or store quantum states of light. Hence it is necessary to understand how EIT systems influence the quantum state of a light beam and whether EIT systems can ever have the potential to delay and store quantum information at the quantum noise limit. ¶ This thesis examines the transfer of an optical signal at the sideband frequencies through an EIT medium. A comprehensive characterisation of an EIT system in terms of delay and signal transmission is performed. This measurement technique provides data on EIT performance over a range of signal frequencies and a range of experimental parameters. Experiments were conducted with both pure Rubidium vapour and Rubidium vapour mixed with a noble gas. ¶ Studies have been made into a new system of measurement that will allow delay, attenuation and added noise spectra to be assessed via a single-shot measurement.

•Jan 1, 2006•0 citations

Toroidal electromagnetically induced transparency based meta-surfaces and its applications

Angana Bhattacharya, Rakesh Sarkar, Gagan Kumar

The vigorous research on low-loss photonic devices has brought significance to a new kind of electromagnetic excitation, known as toroidal resonances. Toroidal excitation, possessing high-quality factor and narrow linewidth of the resonances, has found profound applications in metamaterial (MM) devices. By the coupling of toroidal dipolar resonance to traditional electric/magnetic resonances, a metamaterial analogue of electromagnetically induced transparency effect (EIT) has been developed. Toroidal induced EIT has demonstrated intriguing properties including steep linear dispersion in transparency windows, often leading to elevated group refractive index in the material. This review summarizes the brief history and properties of the toroidal resonance, its identification in metamaterials, and their applications. Further, numerous theoretical and experimental demonstrations of single and multiband EIT effects in toroidal-dipole-based metamaterials and its applications are discussed. The study of toroidal-based EIT has numerous potential applications in the development of biomolecular sensing, slow light systems, switches, and refractive index sensing.

iScience•Dec 29, 2021•30 citations

Nonlinear optics using electromagnetically induced transparency

Stephen E. Harris, G. Y. Yin

It is now well understood that the characteristics of a nonlinear optical process are the result of the interplay of the linear and nonlinear susceptibilities. In general, as an atomic transition to the ground state is approached, the nonlinear susceptibility is resonantly enhanced, but, at the same time, the media exhibits a rapidly increasing refractive index and becomes opaque. During the last several years we have shown how electromagnetically induced transparency (EIT) may be used to dramatically solve this problem.

Nonlinear Optics•Nov 27, 2002•3 citations

Slow-light dynamics from electromagnetically-induced-transparency spectra

Mason Klein, Michael Hohensee, Yanhong Xiao +3 more

We show how slow-light pulse delays in realistic electromagnetically-induced-transparency (EIT) media can be determined directly from static transmission spectra. Using only the measured EIT linewidth and off-resonant transmission, the absolute delay of a slow-light pulse in an optically thick, power-broadened medium can be simply and accurately determined, while capturing more complex optical pumping behavior.

Physical Review A•May 18, 2009•23 citations

Electromagnetically Induced Transparency in Media with Rydberg Excitons 1: Slow Light

David Ziemkiewicz

In this paper, we show that Electromagnetically Induced Transparency (EIT) can be realized in mediums with Rydberg excitons. With realistic, reliable parameters which show good agreement with optical and electro-optical experiments, as well as the proper choice of Rydberg exciton states in the Cu2O crystal, we indicate how the EIT can be performed. The calculations show that, due to a large group index, one can expect the slowing down of a light pulse by a factor of about 10 4 in this medium.

Entropy•Feb 4, 2020•7 citations

Electromagnetically induced transparency metamaterials: theories, designs and applications

Lei Zhu, Liang Dong

Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.

Journal of Physics D Applied Physics•Mar 25, 2022•59 citations
This thesis is divided into two parts.In Part 1 I describe the experimental setup used to investigate electromagnetically induced transparency (EIT).It is shown that impure polarization, stray magnetic fields and imperfect optical alignments cause broadening of the EIT signal and other spurious effects.A systematic approach to minimizing these undesired effects is described, which is shown to produce signals that are four to six times narrower than measurements taken prior to minimization.I conclude part 1 by outlining the progress made toward the production of "slow" light.In Part 2 I describe my earlier research, performed during the first year of my graduate studies, on optical sensing in turbid media.This research culminated in a first accurate measurement of the complex refractive index and in-situ particle sizing in highly scattering opaque media.
Electromagnetically Induced Transparency is an effect that allows light to propagate through an otherwise opaque material. Due to the dispersion properties of the EIT system, it also slows the information carried on the sideband frequencies of a light beam. The effect can also be used to store information in an atomic medium. It was therefore proposed that EIT systems can be applied in optical cicuits, specifically with regard to quantum information processing where it is necessary to delay, or store quantum states of light. Hence it is necessary to understand how EIT systems influence the quantum state of a light beam and whether EIT systems can ever have the potential to delay and store quantum information at the quantum noise limit. ¶ This thesis examines the transfer of an optical signal at the sideband frequencies through an EIT medium. A comprehensive characterisation of an EIT system in terms of delay and signal transmission is performed. This measurement technique provides data on EIT performance over a range of signal frequencies and a range of experimental parameters. Experiments were conducted with both pure Rubidium vapour and Rubidium vapour mixed with a noble gas. ¶ Studies have been made into a new system of measurement that will allow delay, attenuation and added noise spectra to be assessed via a single-shot measurement.
The vigorous research on low-loss photonic devices has brought significance to a new kind of electromagnetic excitation, known as toroidal resonances. Toroidal excitation, possessing high-quality factor and narrow linewidth of the resonances, has found profound applications in metamaterial (MM) devices. By the coupling of toroidal dipolar resonance to traditional electric/magnetic resonances, a metamaterial analogue of electromagnetically induced transparency effect (EIT) has been developed. Toroidal induced EIT has demonstrated intriguing properties including steep linear dispersion in transparency windows, often leading to elevated group refractive index in the material. This review summarizes the brief history and properties of the toroidal resonance, its identification in metamaterials, and their applications. Further, numerous theoretical and experimental demonstrations of single and multiband EIT effects in toroidal-dipole-based metamaterials and its applications are discussed. The study of toroidal-based EIT has numerous potential applications in the development of biomolecular sensing, slow light systems, switches, and refractive index sensing.
It is now well understood that the characteristics of a nonlinear optical process are the result of the interplay of the linear and nonlinear susceptibilities. In general, as an atomic transition to the ground state is approached, the nonlinear susceptibility is resonantly enhanced, but, at the same time, the media exhibits a rapidly increasing refractive index and becomes opaque. During the last several years we have shown how electromagnetically induced transparency (EIT) may be used to dramatically solve this problem.
Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.