Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Synchronization of distant optical clocks across free-space optical links

Nathan R. Newbury, Laura C. Sinclair, Hugo Bergeron, William C. Swann, Jean-Daniel Deschênes, Esther Baumann, Ian R. Coddington, Fabrizio R. Giorgetta, Isaac H. Khader

Published Jun 1, 2017• 0 citations
Publisher

Abstract

The continued remarkable advances in optical clocks and oscillators has led to a parallel strong development of optical clock networks [1]. Such networks have the potential to support a wide range of applications from basic time/frequency dissemination, to clock-based geodesy, to tests of general relativity [1]. To support optical clocks/oscillators at their highest accuracy and precision, these networks must rely on optical signals between the nodes to carry the timing signals. Networks based on the reciprocal transmission across fiber optics have allowed frequency comparisons between remote clocks across Europe and Japan [2, 3]. However, there are many potential applications, both terrestrial and space-based, for which the clocks will not be connected via an optical fiber and the signals must be sent across free space optical links. To this end, we have been developing techniques for the free-space transfer of time and frequency [4-6]. Moreover, rather than pursuing only frequency comparison, we have developed an approach that allows time comparison and even real-time synchronization between nodes. Such a capability can support the wide variety of proposed applications of mobile optical clock networks.

DOI
10.1109/cleoe-eqec.2017.8087462

Related papers

Synchronization of Distant Optical Clocks at the Femtosecond Level

Jean-Daniel Deschênes, Laura C. Sinclair, Fabrizio R. Giorgetta +6 more

The use of optical clocks or oscillators in future ultraprecise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links.Here, we demonstrate full unambiguous synchronization of two optical time scales across a free-space link.The time deviation between synchronized time scales is below 1 fs over durations from 0.1 to 6500 s, despite atmospheric turbulence and kilometer-scale path length variations.Over 2 days, the time wander is 40 fs peak to peak.Our approach relies on the two-way reciprocity of a single-spatial-mode optical link, valid to below 225 attoseconds across a turbulent 4-km path.This femtosecond level of time-frequency transfer should enable optical networks using state-of-the-art optical clocks or oscillators.

arXiv:1509.07888•Physical Review X•May 11, 2016•164 citations

Real-Time Synchronization of Clocks at Femtosecond Level Through a 113 km-Free-Space Link

Min Li, Qi Shen, Jian-Yu Guan +18 more

SummaryHigh-precision time comparison and synchronization is required with the increasing application of the optical clocks in precise navigation, gravitational sensing, and relativity experiments. However, previous works at femtosecond-level time synchronization did not extend beyond dozens of kilometers. Here we demonstrate real-time synchronization of two optical clocks over a turbulent 113-km free space link via optical two-way time and frequency transfer. Despite optical power attenuation of 80dB due to atmospheric turbulence, the time deviation between two synchronized time scales is below 50 fs over a 15-hour measurement period, and a stability of less than 1.6 × 10−19at 10,000 s is achieved through an out-of-loop time-frequency transfer link. The ability to synchronize two distant optical clocks can support future precision navigation, and it also provides technical foundation for the future femtosecond clock synchronization over ground-to-satellite free-space paths.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

NEAT-FT: The European Fiber Link Collaboration

H. Schnatz, G. Bolognini, Davide Calonico +12 more

The development of clocks based on optical transitions during the past three decades culminates in the availability of optical clocks with unprecedented stability and uncertainty . Simultaneously, increasing requirements for accurate time and frequency signals, e.g. for tests of fundamental physics or novel applications in relativistic geodesy, put forward new challenges. Typically, such applications rely on the comparison of two remote clocks. Thus, major challenges are how to synchronize these clocks over long distances or how to get the time or frequency signal of a clock to the location where it is required. It is generally agreed that optical fiber links are an excellent alternative to established satellite based distant clock comparison and synchronization techniques. A European joint research project called Network for European Accurate Time and Frequency Transfer (NEAT-FT) has been initiated in 2011 to lay the foundations for a novel approach to disseminate high-precision timing and ultrastable frequency signals by using existing fiber infrastructure. Since Europe has a large number of modern ultra-precise clocks, special emphasis is put on the development of new techniques for time transfer and phase-coherent comparison of remotely located optical clocks and the feasibility of a European fibre network connecting optical clocks in Europe. This talk highlights recent achievements and discusses some applications and prospects.

•Jun 23, 2014•0 citations

Demonstrations of real-time precision optical time synchronization in a true three-node architecture*

Kyle W. Martin, Nader Zaki, Nolan Matthews +4 more

Abstract Multi-node optical clock networks will enable future studies of fundamental physics and enable applications in quantum and classical communications as well as navigation and geodesy. We implement the first ever multi-node optical clock network with real-time, relative synchronization over free-space communication channels and precision on the order of 10 femtoseconds, realized as a three-node system in a hub-and-spoke topology. In this paper we describe the system and its performance, including a first ever measurement of precision optical time synchronization between nodes with no direct communication link or causal feedback relationship.

arXiv:2312.16348•Journal of Physics Photonics•Mar 3, 2025•5 citations

Demonstration of Real-Time Precision Optical Time Synchronization in a True Three-Node Architecture

Kyle W. Martin, Matthew S. Bigelow, Nader Zaki +4 more

Multi-node optical clock networks will enable future studies of fundamental physics and enable applications in quantum and classical communications as well as navigation and geodesy. We implement the first ever multi-node optical clock network with real-time, relative synchronization over free-space communication channels and precision on the order of 10 fs, realized as a three-node system in a hub-and-spoke topology. In this paper we describe the system and its performance, including a new, independent, out-of-loop verification of two-way optical time synchronization.

Proceedings of the ... annual Precise Time and Time Interval (PTTI) Systems and Applications Meeting/Proceedings of a meeting - Precise Time and Time Interval (PTTI) Systems and Applications Meeting•Feb 15, 2024•0 citations

Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo +42 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

•Jan 1, 2017•0 citations
The continued remarkable advances in optical clocks and oscillators has led to a parallel strong development of optical clock networks [1]. Such networks have the potential to support a wide range of applications from basic time/frequency dissemination, to clock-based geodesy, to tests of general relativity [1]. To support optical clocks/oscillators at their highest accuracy and precision, these networks must rely on optical signals between the nodes to carry the timing signals. Networks based on the reciprocal transmission across fiber optics have allowed frequency comparisons between remote clocks across Europe and Japan [2, 3]. However, there are many potential applications, both terrestrial and space-based, for which the clocks will not be connected via an optical fiber and the signals must be sent across free space optical links. To this end, we have been developing techniques for the free-space transfer of time and frequency [4-6]. Moreover, rather than pursuing only frequency comparison, we have developed an approach that allows time comparison and even real-time synchronization between nodes. Such a capability can support the wide variety of proposed applications of mobile optical clock networks.
The use of optical clocks or oscillators in future ultraprecise navigation, gravitational sensing, coherent arrays, and relativity experiments will require time comparison and synchronization over terrestrial or satellite free-space links.Here, we demonstrate full unambiguous synchronization of two optical time scales across a free-space link.The time deviation between synchronized time scales is below 1 fs over durations from 0.1 to 6500 s, despite atmospheric turbulence and kilometer-scale path length variations.Over 2 days, the time wander is 40 fs peak to peak.Our approach relies on the two-way reciprocity of a single-spatial-mode optical link, valid to below 225 attoseconds across a turbulent 4-km path.This femtosecond level of time-frequency transfer should enable optical networks using state-of-the-art optical clocks or oscillators.
SummaryHigh-precision time comparison and synchronization is required with the increasing application of the optical clocks in precise navigation, gravitational sensing, and relativity experiments. However, previous works at femtosecond-level time synchronization did not extend beyond dozens of kilometers. Here we demonstrate real-time synchronization of two optical clocks over a turbulent 113-km free space link via optical two-way time and frequency transfer. Despite optical power attenuation of 80dB due to atmospheric turbulence, the time deviation between two synchronized time scales is below 50 fs over a 15-hour measurement period, and a stability of less than 1.6 × 10−19at 10,000 s is achieved through an out-of-loop time-frequency transfer link. The ability to synchronize two distant optical clocks can support future precision navigation, and it also provides technical foundation for the future femtosecond clock synchronization over ground-to-satellite free-space paths.
The development of clocks based on optical transitions during the past three decades culminates in the availability of optical clocks with unprecedented stability and uncertainty . Simultaneously, increasing requirements for accurate time and frequency signals, e.g. for tests of fundamental physics or novel applications in relativistic geodesy, put forward new challenges. Typically, such applications rely on the comparison of two remote clocks. Thus, major challenges are how to synchronize these clocks over long distances or how to get the time or frequency signal of a clock to the location where it is required. It is generally agreed that optical fiber links are an excellent alternative to established satellite based distant clock comparison and synchronization techniques. A European joint research project called Network for European Accurate Time and Frequency Transfer (NEAT-FT) has been initiated in 2011 to lay the foundations for a novel approach to disseminate high-precision timing and ultrastable frequency signals by using existing fiber infrastructure. Since Europe has a large number of modern ultra-precise clocks, special emphasis is put on the development of new techniques for time transfer and phase-coherent comparison of remotely located optical clocks and the feasibility of a European fibre network connecting optical clocks in Europe. This talk highlights recent achievements and discusses some applications and prospects.
Abstract Multi-node optical clock networks will enable future studies of fundamental physics and enable applications in quantum and classical communications as well as navigation and geodesy. We implement the first ever multi-node optical clock network with real-time, relative synchronization over free-space communication channels and precision on the order of 10 femtoseconds, realized as a three-node system in a hub-and-spoke topology. In this paper we describe the system and its performance, including a first ever measurement of precision optical time synchronization between nodes with no direct communication link or causal feedback relationship.
Multi-node optical clock networks will enable future studies of fundamental physics and enable applications in quantum and classical communications as well as navigation and geodesy. We implement the first ever multi-node optical clock network with real-time, relative synchronization over free-space communication channels and precision on the order of 10 fs, realized as a three-node system in a hub-and-spoke topology. In this paper we describe the system and its performance, including a new, independent, out-of-loop verification of two-way optical time synchronization.
The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].