CRC Press eBooks

Amplification and Lasing without Inversion

Paul Mandel

Published May 4, 2018• 0 citations

Abstract

When an atomic system interacts with light, it can amplify the electromagnetic radiation when gain exceeds loss. This requires that transitions from the upper level to the lower level prevail over the transitions from the lower level to the upper level. If one deals with a two-level system, the only way to obtain amplification is to create a state of population inversion, i.e. the upper level must be more densely populated that the lower level. "Lasing without inversion" may be possible when part of the atoms are trapped, which removes them from the subspace of states with which the upper level can have transitions. This chapter determines to what extent population inversion is necessary to achieve amplification. Independently, amplification without inversion and lasing without inversion were predicted by Harris using a different type of atomic interference. The amplification threshold has a number of features that are reminiscent of the laser threshold.

DOI: 10.1201/9781351075046-11

Related papers

Amplitude squeezing and transition from lasing with inversion to lasing without inversion in a multilevel laser

Min Xiao Yifu Zhu

Considerable attention has been directed recently to the study of lasing without the need of population inversion. The optical coherence and quantum interference associated with the light amplification may lead to interesting statistical properties in inversionless lasers. Here we analyze a laser model that consists of an ensemble of closed multi-level (three or four levels) atoms driven by a single coherent field. Unlike conventional lasers where population inversion is maintained and kept at the threshold value for arbitrary laser output, the multi-level laser analyzed here can start lasing from population inversion and evolves from population inversion into non-inversion with the increasing atomic pumping. In other words, the system makes transition from light amplification by population inversion into light amplification by coherence. On the other hand, the system can be also made to start lasing without population inversion in any state basis. In both cases, initial inversion and non-inversion, which are controlled by the ratio of spontaneous decay rates, the laser well above threshold is always maintained by lasing without inversion (light amplification by coherence), and the laser intensity fluctuations may drop below the shot noise limit. Two factors contribute to the noise reduction: first, the disappearance of the population inversion leads to the depleted atomic population in the upper lasing state, which reduces the spontaneous emission noises; second, the fast coherent cycling of electrons between excited states leads to the highly regulated absorption and emission processes. We found that the combination of these two mechanisms can lead to the noise reduction in the laser output more than 50% below the shot-noise limit.

Annual Meeting Optical Society of AmericaJan 1, 19930 citations

Lasing without inversion: progress and prognosis

Olga A. Kocharovskaya, Paul Mandel

[6]. This state is called trapped state or nonabsorbingstate. Therefore, if one managed to prepare all atoms at lower levels in such trapped state any small amount ofatoms at upper level should be sufficient for amplification since there should be transitions from the upper state tothe state which is orthogonal to the trapped one. Apparently, such inversionless amplification implies some hiddeninversion, namely, with respect to the empty untrapped state. In general, population inversion is required between

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEMay 10, 19960 citations

Laser oscillations

E. Rosencher, B. Vinter

Introduction We were able to show in Chapter 3 that a medium in which we can obtain a population inversion (i.e. a situation in which the population density in the excited state is greater than that in the fundamental level) allows for optical gain of an electromagnetic wave having a frequency near to the resonant frequency of the system. By introducing feedback of the amplified signal into the medium, the system can be made to oscillate naturally, resulting in laser oscillations . To obtain this population inversion, we must introduce at least a third (and perhaps even a fourth) energy level into the system. (We saw how a two-level system under the influence of an intense pump beam will saturate with no resulting population inversion.) The aim then of this chapter is to introduce the concepts necessary to extend our two-level system into a working model capable of illustrating the phenomenon of laser oscillation. We will not spend too much time discussing atomic transition lasers as they do not figure readily in our treatment of quantum electronic properties of semiconductors. An exception will be made, however; we brush upon the particular topics of a diode pumped laser in Complement 4.E and a quantum cascade laser in Complement 13.H. Population inversion and optical amplification Population inversion We will show how population inversion can be achieved by carrier transfer from higher lying levels to the upper level of a two-level subsystem of interest.

Cambridge University Press eBooksMay 30, 20020 citations

Amplification without population inversion

Olga A. Kocharovskaya, Paul Mandel, Yakov I. Khanin

Three- and four-level schemes of inversionless amplification with different types of coherent pumping is reviewed. Amplification without inversion between the 'bare' states is a result of population inversion between eigenstates of the density matrix. In particular, it can be achieved due to the coherent population trapping, i.e., effective removal from the interaction with the field a fraction of atoms at lower levels.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEDec 16, 19922 citations

Theory of lasing without population inversion

Heide Doss, Lorenzo M. Narducci

This thesis is concerned with the amplification of coherent radiation from an active medium under conditions which require no population inversion between the energy levels. Gain without population inversion may be obtained by creating a sufficiently strong correlation between pairs of atomic states, usually with the help of external sources of resonant electromagnetic radiation. Our main objective is to investigate two possible selections for the active medium: a three level atom in a lambda configuration and a Raman-driven four level model. For both we identify the conditions that lead to inversionless laser action, we calculate the small signal gain and investigate the physical mechanisms which are responsible for the emergence of gain. While the ultimate cause of the gain is quantum interference, we propose attractive alternative pictures based on the dressed states of the coupled atom-driving field systems. We address the important practical issue of the effect of atomic motion and related Doppler broadening on the inversionless gain profile and we also analyze the transient response of each laser model with the help of the appropriate Maxwell-Bloch equations. Finally we develop a fully quantum mechanical description of the lambda model and find that the radiated field can display unique quantum features which manifest themselves with sub-Poissonian photon fluctuations.

Jan 1, 19921 citation

Theory of lasers without inversion

Victor R. Blok, Gennady M. Krochik

We here present the theory of lasing without inversion for systems with a split upper laser level. We show that the effect of amplification without inversion may be realized for at least two different situations. In the first situation, the effect is due to the asymmetry of radiative characteristics of quasidegenerate transitions. In the second situation, the effect can be provided without any asymmetry and is achievable for the definite phase of the transfer of coherence between the quasidegenerate levels (quasiparametric amplification). We also show that for laser amplification without inversion, the rate (frequency) of mixing of the quasidegenerate levels should be significantly higher than the linewidths of these levels. This mixing of quasidegenerate levels can be realized by low-frequency electromagnetic radiation or by interaction with an auxiliary third level. In addition, we derive the conditions for providing laser action for such systems rigorously, and we give some specific examples for the realization of this effect in gaseous and solid-state media. One of the most promising configurations may be realized in solid-state media when two narrow quasidegenerate levels are embedded in quasifree states (low-density state conduction band). We also discuss the use of a parametric mechanism for the creation of spatial gratings and for the construction of new types of electro-optical devices.

Physical Review AFeb 1, 199044 citations