Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Temporal and spatial multiplexed infrared single-photon counter based on high-speed avalanche photodiode

Xiuliang Chen, Chengjie Ding, Haifeng Pan, Kun Huang, Julien Laurat, Guang Wu, E Wu

Published Mar 15, 2017• 13 citations
Publisher

Abstract

We report on a high-speed temporal and spatial multiplexed single-photon counter with photon-number-resolving capability up to four photons. The infrared detector combines a fiber loop to split, delay and recombine optical pulses and a 200 MHz dual-channel single-photon detector based on InGaAs/InP avalanche photodiode. To fully characterize the photon-number-resolving capability, we perform quantum detector tomography and then reconstruct its positive-operator-valued measure and the associated Wigner functions. The result shows that, despite of the afterpulsing noise and limited system detection efficiency, this temporal and spatial multiplexed single-photon counter can already find applications for large repetition rate quantum information schemes.

DOI
10.1038/srep44600

Related papers

Quantum witness of high-speed low-noise single-photon detection

Lin Zhao, Kun Huang, Yan Liang +4 more

We demonstrate high-speed and low-noise near-infrared single-photon detection by using a capacitance balancing circuit to achieve a high spike noise suppression for an InGaAs/InP avalanche photodiode. The single-photon detector could operate at a tunable gate repetition rate from 10 to 60 MHz. A peak detection efficiency of 34% has been achieved with a dark count rate of 9 × 10⁻³ per gate when the detection window was set to 1 ns. Additionally, quantum detector tomography has also been performed at 60 MHz of repetition rate and for the detection window of 1 ns, enabling to witness the quantum features of the detector with the help of a negative Wigner function. By varying the bias voltage of the detector, we further demonstrated a transition from the full-quantum to semi-classical regime.

Optics Express•Dec 2, 2015•2 citations

High-Speed Single-Photon Detection Using 2-GHz Sinusoidally Gated InGaAs/InP Avalanche Photodiode

Naoto Namekata, S. Adachi, Shuichiro Inoue

We report a telecom-band single-photon detector for high-speed quantum key distribution systems. The single-photon detector is based on a sinusoidally gated InGaAs/InP avalanche photodiode. The gate repetition frequency of the single-photon detector reached 2 GHz. A quantum efficiency of 10.5 % at 1550 nm was obtained with a dark count probability per gate of 6.1×10− 7 and an afterpulsing probability of 3.4 %.

Quantum Communication and Quantum Networking•Oct 11, 2012•1 citation

A single-photon detector for high-speed telecom-band quantum communication applications

Chuang Liang, Kim Fook Lee, Paul L. Voss +5 more

We present the design and construction of a high-speed telecom-band (1.5 μm) single-photon counting system based on an InGaAs/InP avalanche photodiode (APD) operating in the gated Geiger mode. The detector can be gated at high speeds (we examine its performance up to 25 MHz) to maximize the counting rate in long-distance, telecom-band, fiber-optic quantum communication applications. Narrow gate pulses (250 ps full width at half maximum) are used to reduce the dark-count and the after-pulse probability. In order to count the avalanche events, we employ a high-speed comparator to sample the unfiltered and unamplified avalanche photocurrent. The APD and all the associated electronics are integrated onto a printed circuit board with a computer interface. In addition, we cool the APD to -27°C to reduce the dark-count probability.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 18, 2005•6 citations

15 GHz single-photon detection at telecommunication wavelengths using sinusoidally gated InGaAs/InP avalanche photodiode

Naoto Namekata, S. Adachi, Shuichiro Inoue

We report a telecom-band single-photon detector for gigahertz clocked quantum key distribution systems. The single-photon detector is based on a sinusoidally gated InGaAs/InP avalanche photodiode. The gate repetition frequency of the single-photon detector reached 1.5 GHz. A quantum efficiency of 10.8 % at 1550 nm was obtained with a dark count probability per gate of 6.3 x 10(-7) and an afterpulsing probability of 2.8 %. Moreover, the maximum detection rate of the detector is 20 MHz.

Optics Express•Apr 2, 2009•137 citations

Quantum Calibration of Photon-Number-Resolving Detectors Based on Multi-Pixel Photon Counters

Yujie Cai, Yu Chen, Xiuliang Chen +5 more

In this paper, we reconstructed the positive operator-valued measure (POVM) of a photon-number-resolving detector (PNRD) based on a multi-pixel photon counter (MPPC) by means of quantum detector tomography (QDT) at 791 nm and 523 nm, respectively. MPPC is a kind of spatial-multiplexing PNRD with a silicon avalanche photodiode (Si-APD) array as the photon receiver. Experimentally, the quantum characteristics of MPPC were calibrated at 2 MHz at two different wavelengths. The POVM elements were given by QDT. The fidelity of the reconstructed POVM elements is higher than 99.96%, which testifies that the QDT is reliable to calibrate MPPC at different wavelengths. With QDT and associated Wigner functions, the quantum properties of MPPC can be calibrated more directly and accurately in contrast with those conventional methods of modeling detectors.

Applied Sciences•Jun 29, 2019•9 citations

Novel photon detection technologies for quantum communications

Masahide Sasaki, Akihiro Tanaka, Mikio Fujiwara +12 more

We present the latest results on two kinds of photon detectors: single photon detectors (SPDs) and photon number resolving detector (PNRD). We developed high speed and low noise SPDs using superconducting nano-wire (abbreviated by SNSPD) and semiconductor (InGaAs) avalanche photodiode (APD). The SNSPD system has totally four channels all of which have the detection eciency higher than 16% at 100Hz dark count rate. The InGaAs APD system also has four channels and the best performance is represented by the after-pulse probability of 0.61%, the dark count probability of 0.71×10-6 (~1kHz), and the detection eciency of 10.9%. Both systems were applied to wavelength division multiplexing quantum key distribution (WDM-QKD) operated at 1.2GHz repetition rate in a eld environment. The PNRD is made of superconducting transition edge sensor. It was applied to the implementation of quantum receiver which could beat the homodyne limit of the bit error rate of binary coherent states. We discuss future perspective of quantum communications with those photon detection technologies, including multi-user QKD networks and low-power high capacity communications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 1, 2012•0 citations
We report on a high-speed temporal and spatial multiplexed single-photon counter with photon-number-resolving capability up to four photons. The infrared detector combines a fiber loop to split, delay and recombine optical pulses and a 200 MHz dual-channel single-photon detector based on InGaAs/InP avalanche photodiode. To fully characterize the photon-number-resolving capability, we perform quantum detector tomography and then reconstruct its positive-operator-valued measure and the associated Wigner functions. The result shows that, despite of the afterpulsing noise and limited system detection efficiency, this temporal and spatial multiplexed single-photon counter can already find applications for large repetition rate quantum information schemes.
We demonstrate high-speed and low-noise near-infrared single-photon detection by using a capacitance balancing circuit to achieve a high spike noise suppression for an InGaAs/InP avalanche photodiode. The single-photon detector could operate at a tunable gate repetition rate from 10 to 60 MHz. A peak detection efficiency of 34% has been achieved with a dark count rate of 9 × 10⁻³ per gate when the detection window was set to 1 ns. Additionally, quantum detector tomography has also been performed at 60 MHz of repetition rate and for the detection window of 1 ns, enabling to witness the quantum features of the detector with the help of a negative Wigner function. By varying the bias voltage of the detector, we further demonstrated a transition from the full-quantum to semi-classical regime.
We present the design and construction of a high-speed telecom-band (1.5 μm) single-photon counting system based on an InGaAs/InP avalanche photodiode (APD) operating in the gated Geiger mode. The detector can be gated at high speeds (we examine its performance up to 25 MHz) to maximize the counting rate in long-distance, telecom-band, fiber-optic quantum communication applications. Narrow gate pulses (250 ps full width at half maximum) are used to reduce the dark-count and the after-pulse probability. In order to count the avalanche events, we employ a high-speed comparator to sample the unfiltered and unamplified avalanche photocurrent. The APD and all the associated electronics are integrated onto a printed circuit board with a computer interface. In addition, we cool the APD to -27°C to reduce the dark-count probability.
In this paper, we reconstructed the positive operator-valued measure (POVM) of a photon-number-resolving detector (PNRD) based on a multi-pixel photon counter (MPPC) by means of quantum detector tomography (QDT) at 791 nm and 523 nm, respectively. MPPC is a kind of spatial-multiplexing PNRD with a silicon avalanche photodiode (Si-APD) array as the photon receiver. Experimentally, the quantum characteristics of MPPC were calibrated at 2 MHz at two different wavelengths. The POVM elements were given by QDT. The fidelity of the reconstructed POVM elements is higher than 99.96%, which testifies that the QDT is reliable to calibrate MPPC at different wavelengths. With QDT and associated Wigner functions, the quantum properties of MPPC can be calibrated more directly and accurately in contrast with those conventional methods of modeling detectors.
We present the latest results on two kinds of photon detectors: single photon detectors (SPDs) and photon number resolving detector (PNRD). We developed high speed and low noise SPDs using superconducting nano-wire (abbreviated by SNSPD) and semiconductor (InGaAs) avalanche photodiode (APD). The SNSPD system has totally four channels all of which have the detection eciency higher than 16% at 100Hz dark count rate. The InGaAs APD system also has four channels and the best performance is represented by the after-pulse probability of 0.61%, the dark count probability of 0.71×10-6 (~1kHz), and the detection eciency of 10.9%. Both systems were applied to wavelength division multiplexing quantum key distribution (WDM-QKD) operated at 1.2GHz repetition rate in a eld environment. The PNRD is made of superconducting transition edge sensor. It was applied to the implementation of quantum receiver which could beat the homodyne limit of the bit error rate of binary coherent states. We discuss future perspective of quantum communications with those photon detection technologies, including multi-user QKD networks and low-power high capacity communications.