Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

A single-photon detector for high-speed telecom-band quantum communication applications

Chuang Liang, Kim Fook Lee, Paul L. Voss, Eric Corndorf, Gregory S. Kanter, Jun Chen, Xiaoying Li, Prem Kumar

Published Aug 18, 2005• 6 citations
Publisher

Abstract

We present the design and construction of a high-speed telecom-band (1.5 μm) single-photon counting system based on an InGaAs/InP avalanche photodiode (APD) operating in the gated Geiger mode. The detector can be gated at high speeds (we examine its performance up to 25 MHz) to maximize the counting rate in long-distance, telecom-band, fiber-optic quantum communication applications. Narrow gate pulses (250 ps full width at half maximum) are used to reduce the dark-count and the after-pulse probability. In order to count the avalanche events, we employ a high-speed comparator to sample the unfiltered and unamplified avalanche photocurrent. The APD and all the associated electronics are integrated onto a printed circuit board with a computer interface. In addition, we cool the APD to -27°C to reduce the dark-count probability.

DOI
10.1117/12.616188

Related papers

High-Speed Single-Photon Detection Using 2-GHz Sinusoidally Gated InGaAs/InP Avalanche Photodiode

Naoto Namekata, S. Adachi, Shuichiro Inoue

We report a telecom-band single-photon detector for high-speed quantum key distribution systems. The single-photon detector is based on a sinusoidally gated InGaAs/InP avalanche photodiode. The gate repetition frequency of the single-photon detector reached 2 GHz. A quantum efficiency of 10.5 % at 1550 nm was obtained with a dark count probability per gate of 6.1×10− 7 and an afterpulsing probability of 3.4 %.

Quantum Communication and Quantum Networking•Oct 11, 2012•1 citation

High-speed bridge circuit for InGaAs avalanche photodiode single-photon detector

Hirofumi Hashimoto, Akihisa Tomita, Atsushi Okamoto

Because of low power consumption and small footprint, avalanche photodiodes (APD) have been commonly applied to photon detection. Recently, high speed quantum communication has been demonstrated for high bit-rate quantum key distribution. For the high speed quantum communication, photon detectors should operate at GHz-clock frequencies. We propose balanced detection circuits for GHz-clock operation of InGaAs-APD photon detectors. The balanced single photon detector operates with sinusoidal wave gating. The sinusoidal wave appearing in the output is removed by the subtraction from APD signal without sharp band-elimination filters. Omission of the sharp filters removes the constraint on the operating frequency of the single photon detector. We present two designs, one works with two identical APDs, the other with one APD and a low-pass filter. The sinusoidal gating enables to eliminate the gating noise even with the simple configuration of the latter design. We demonstrated the balanced single photon detector operating with 1.020GHz clock at 233 K, 193 K, and 186.5 K. The dark count probability was 4.0 x 10-4 counts/pulse with the quantum efficiency of 10% at 233K, and 1.6 x 10-4 counts/pulse at 186.5 K. These results were obtained with easily available APDs (NR8300FP-C.C, RENESASS) originally developed for optical time-domain reflectmeters.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 1, 2014•0 citations

High-speed bridge circuit for InGaAs avalanche photodiode single-photon detector

Hirofumi Hashimoto, Akihisa Tomita, Atsushi Okamoto

Because of low power consumption and small footprint, avalanche photodiodes (APD) have been commonly applied to photon detection. Recently, high speed quantum communication has been demonstrated for high bit-rate quantum key distribution. For the high speed quantum communication, photon detectors should operate at GHz-clock frequencies. We propose balanced detection circuits for GHz-clock operation of InGaAs-APD photon detectors. The balanced single photon detector operates with sinusoidal wave gating. The sinusoidal wave appearing in the output is removed by the subtraction from APD signal without sharp band-elimination filters. Omission of the sharp filters removes the constraint on the operating frequency of the single photon detector. We present two designs, one works with two identical APDs, the other with one APD and a low-pass filter. The sinusoidal gating enables to eliminate the gating noise even with the simple configuration of the latter design. We demonstrated the balanced single photon detector operating with 1.020GHz clock at 233 K, 193 K, and 186.5 K. The dark count probability was 4.0 x 10-4 counts/pulse with the quantum efficiency of 10% at 233K, and 1.6 x 10-4 counts/pulse at 186.5 K. These results were obtained with easily available APDs (NR8300FP-C.C, RENESASS) originally developed for optical time-domain reflectmeters.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 19, 2014•2 citations

Linear-mode single-photon-sensitive avalanche photodiodes for GHz-rate near-infrared quantum communications

Andrew S. Huntington, Madison A. Compton, Sam Coykendall +2 more

We present design and performance data for a high-speed telecom-band (1.3 mum) single-photon-sensitive receiver based on a new class of multi-stage InGaAs avalanche photodiode (APD) operated in the proportional mode (linear mode). Unlike Geiger-mode single-photon-sensitive APDs (SPADs), a multi-stage linear SPAD is operated below its avalanche breakdown voltage and need not be gated to suppress afterpulsing. Further, the linear-mode APD preserves signal amplitude information, whereas the response of a Geiger APD is binary. Unlike contemporary near-infrared (NIR) APDs, the engineered APDs have excess avalanche noise comparable to silicon, sufficient for quantum communication protocols.

IEEE Military Communications Conference (MILCOM)•Nov 1, 2008•7 citations

15 GHz single-photon detection at telecommunication wavelengths using sinusoidally gated InGaAs/InP avalanche photodiode

Naoto Namekata, S. Adachi, Shuichiro Inoue

We report a telecom-band single-photon detector for gigahertz clocked quantum key distribution systems. The single-photon detector is based on a sinusoidally gated InGaAs/InP avalanche photodiode. The gate repetition frequency of the single-photon detector reached 1.5 GHz. A quantum efficiency of 10.8 % at 1550 nm was obtained with a dark count probability per gate of 6.3 x 10(-7) and an afterpulsing probability of 2.8 %. Moreover, the maximum detection rate of the detector is 20 MHz.

Optics Express•Apr 2, 2009•137 citations

Single‐photon detector for long‐distance quantum cryptography

Naoto Namekata, Yuuki Makino, Shuichiro Inoue

Abstract In order to realize long‐distance quantum cryptography based on standard optical fiber network, we have developed a single‐photon detector at 1550 nm using InGaAs/InP avalanche photodiodes (APDs). To reduce the dark count probability, APDs were cooled and operated with a Gated Passive Quenching Circuit. A quantum efficiency of 13.7% was obtained at −55 °C while keeping the dark count probability per gate (2 ns) as low as 2.4 × 10−5. In this paper we will discuss the performance of the developed single‐photon detector in view of application to quantum cryptography. © 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 2, 86(5): 10–15, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/ecjb.10115

Electronics and Communications in Japan (Part II Electronics)•Apr 4, 2003•0 citations
We present the design and construction of a high-speed telecom-band (1.5 μm) single-photon counting system based on an InGaAs/InP avalanche photodiode (APD) operating in the gated Geiger mode. The detector can be gated at high speeds (we examine its performance up to 25 MHz) to maximize the counting rate in long-distance, telecom-band, fiber-optic quantum communication applications. Narrow gate pulses (250 ps full width at half maximum) are used to reduce the dark-count and the after-pulse probability. In order to count the avalanche events, we employ a high-speed comparator to sample the unfiltered and unamplified avalanche photocurrent. The APD and all the associated electronics are integrated onto a printed circuit board with a computer interface. In addition, we cool the APD to -27°C to reduce the dark-count probability.
Because of low power consumption and small footprint, avalanche photodiodes (APD) have been commonly applied to photon detection. Recently, high speed quantum communication has been demonstrated for high bit-rate quantum key distribution. For the high speed quantum communication, photon detectors should operate at GHz-clock frequencies. We propose balanced detection circuits for GHz-clock operation of InGaAs-APD photon detectors. The balanced single photon detector operates with sinusoidal wave gating. The sinusoidal wave appearing in the output is removed by the subtraction from APD signal without sharp band-elimination filters. Omission of the sharp filters removes the constraint on the operating frequency of the single photon detector. We present two designs, one works with two identical APDs, the other with one APD and a low-pass filter. The sinusoidal gating enables to eliminate the gating noise even with the simple configuration of the latter design. We demonstrated the balanced single photon detector operating with 1.020GHz clock at 233 K, 193 K, and 186.5 K. The dark count probability was 4.0 x 10-4 counts/pulse with the quantum efficiency of 10% at 233K, and 1.6 x 10-4 counts/pulse at 186.5 K. These results were obtained with easily available APDs (NR8300FP-C.C, RENESASS) originally developed for optical time-domain reflectmeters.
Because of low power consumption and small footprint, avalanche photodiodes (APD) have been commonly applied to photon detection. Recently, high speed quantum communication has been demonstrated for high bit-rate quantum key distribution. For the high speed quantum communication, photon detectors should operate at GHz-clock frequencies. We propose balanced detection circuits for GHz-clock operation of InGaAs-APD photon detectors. The balanced single photon detector operates with sinusoidal wave gating. The sinusoidal wave appearing in the output is removed by the subtraction from APD signal without sharp band-elimination filters. Omission of the sharp filters removes the constraint on the operating frequency of the single photon detector. We present two designs, one works with two identical APDs, the other with one APD and a low-pass filter. The sinusoidal gating enables to eliminate the gating noise even with the simple configuration of the latter design. We demonstrated the balanced single photon detector operating with 1.020GHz clock at 233 K, 193 K, and 186.5 K. The dark count probability was 4.0 x 10-4 counts/pulse with the quantum efficiency of 10% at 233K, and 1.6 x 10-4 counts/pulse at 186.5 K. These results were obtained with easily available APDs (NR8300FP-C.C, RENESASS) originally developed for optical time-domain reflectmeters.
We present design and performance data for a high-speed telecom-band (1.3 mum) single-photon-sensitive receiver based on a new class of multi-stage InGaAs avalanche photodiode (APD) operated in the proportional mode (linear mode). Unlike Geiger-mode single-photon-sensitive APDs (SPADs), a multi-stage linear SPAD is operated below its avalanche breakdown voltage and need not be gated to suppress afterpulsing. Further, the linear-mode APD preserves signal amplitude information, whereas the response of a Geiger APD is binary. Unlike contemporary near-infrared (NIR) APDs, the engineered APDs have excess avalanche noise comparable to silicon, sufficient for quantum communication protocols.
Abstract In order to realize long‐distance quantum cryptography based on standard optical fiber network, we have developed a single‐photon detector at 1550 nm using InGaAs/InP avalanche photodiodes (APDs). To reduce the dark count probability, APDs were cooled and operated with a Gated Passive Quenching Circuit. A quantum efficiency of 13.7% was obtained at −55 °C while keeping the dark count probability per gate (2 ns) as low as 2.4 × 10−5. In this paper we will discuss the performance of the developed single‐photon detector in view of application to quantum cryptography. © 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 2, 86(5): 10–15, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/ecjb.10115