Ultra-precise measurements of various parameters such as the mass of nano-particles, magnetic fields or gravity can be attained by probing the phononic modes of a micro-mechanical oscillator with light. The sensitivity of such measurements is in part governed by the noise of the phononic mode as well as the noise of the probing light mode, so by decreasing the noise of the probe beam an enhanced sensitivity can be expected. We demonstrate this effect by using squeezed states of light where the quantum uncertainty of the relevant quadrature is reduced below the shot noise level. Using this squeezing-enhanced sensitivity effect, we demonstrate 1) improved feedback cooling of a phononic mode in a microtoroidal cavity and 2) improved sensing of a magnetic field using the coupling to a microtoroidal phononic mode via a magnetorestrictive material. We present our recent experimental results and discuss future directions.
Ultra-precise measurements of various parameters such as the mass of nano-particles, magnetic fields or gravity can be attained by probing the phononic modes of a micro-mechanical oscillator with light. The sensitivity of such measurements is in part governed by the noise of the phononic mode as well as the noise of the probing light mode, so by decreasing the noise of the probe beam an enhanced sensitivity can be expected. We demonstrate this effect by using squeezed states of light where the quantum uncertainty of the relevant quadrature is reduced below the shot noise level. Using this squeezing-enhanced sensitivity effect, we demonstrate 1) improved feedback cooling of a phononic mode in a microtoroidal cavity and 2) improved sensing of a magnetic field using the coupling to a microtoroidal phononic mode via a magnetorestrictive material. We present our recent experimental results and discuss future directions.
Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser cooling can, in principle, be improved by using squeezed light as an electromagnetic reservoir; while quantum feedback control using a squeezed light probe is also predicted to allow improved cooling. Here we show the implementation of quantum feedback control of a micro-mechanical oscillator using squeezed probe light. This allows quantum-enhanced feedback cooling with a measurement rate greater than it is possible with classical light, and a consequent reduction in the final oscillator temperature. Our results have significance for future applications in areas ranging from quantum information networks, to quantum-enhanced force and displacement measurements and fundamental tests of macroscopic quantum mechanics.
According to the Heisenberg uncertainty principle, the precision of any physical quantity measurement is limited by quantum fluctuation in general, which leads to the so-called standard quantum limit (SQL). The SQL can be beaten by using squeezed light, hence enhancing the measurement accuracy. Squeezed light is a typical nonclassical light, it exhibits reduced noise in one quadrature component. Since Caves proposed the scheme of phase measurement enhancement with squeezing, squeezed light has been used to enhance measurement precision in many areas. This review focuses on the following four kinds of precision measurements based on squeezed light: the measurements of relative phase, small lateral displacement and tilt, magnetic field, and clock synchronization. For all of these measurements, vacuum squeezing has been used to enhance measurement precision, while the types of squeezing (squeezing angle, transverse mode, polarization etc.) are different. For phase measurement, quadrature squeezing is injected into the conventionally unused input port of Mach-Zehnder interferometer (MZI) or Michelson interferometer (MI). For displacement or tilt measurement, a vacuum squeezing beam of a special transverse mode is coupled into an intense coherent beam, yielding a spatial-squeezed light whose transverse position or tilt angle noise is lower than that of a classical light beam. Based on the Faraday effect of polarization rotation, the magnetic field can be detected precisely. The precision can be increased further by using the polarization squeezing. The polarization squeezing can be generated by coupling two orthogonal polarized beams together, a coherent beam and a vacuum squeezed beam. Various polarization squeezing can be illustrated on the Poincaré sphere. Finally, in the clock synchronization based on the optical frequency comb, squeezed light can be used to enhance the time measurement precision. A theoretical scheme with multimode squeezing of supermode (a kind of mode describing the frequency mode of a pulse laser beam) is introduced. The squeezing has extensively been applied into the quantum precision measurements such as gravitational wave detection as well as biological measurement and will play a more important role in the near future.
Levitated mechanical systems are promising candidates for quantum gravimetry, as gravity couples directly to their center-of-mass motion, enabling the large mass of a mesoscopic particle to serve as a sensing resource. In this paper, we propose a mechanical squeezed-Fock qubit gravimeter using a Duffing oscillator that is driven by a detuned two-phonon pump. In the squeezed-Fock basis, the gravitational force couples to the anti-squeezed quadrature, which enhances the gravity-induced transition rate while preserving the direct mass scaling of the mechanical force coupling. We show that sensitivity improves with reduced effective qubit splitting that is controlled by the squeezing parameter and the Duffing nonlinearity. We further analyze mechanical damping and show that squeezing converts ordinary dissipation into anisotropic qubit noise, setting a practical trade-off between signal amplification and decoherence rate. These results identify the mechanical squeezed-Fock qubit as a new platform for quantum-enhanced gravimetry.
Squeezed light, a prominent non-classical state of light, exhibits reduced quantum noise in one quadrature component below the standard quantum limit (SQL). The property enables quantum-enhanced precision measurements, surpassing the SQL in quantum sensing applications. This review comprehensively introduces the fundamental concepts, classifications, and experimental generation techniques of squeezed light. It further explores its pivotal role and recent advances in diverse quantum sensing domains, including interferometry, gravitational wave detection, magnetometry, force sensing, biomedical sensing, and quantum radar. The review covers theoretical foundations of squeezed states (including quadrature operators and classification schemes, experimental generation techniques in atomic ensembles, nonlinear crystals, and fibers), fundamentals of quantum sensing with squeezed light (from quantum noise theory to quantum-enhanced metrology), and quantum-enhanced sensing applications across the aforementioned domains. Finally, future challenges and opportunities in the field are discussed.
We determine the theoretical limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system. The motion of a mechanical resonator is transduced onto quadrature fluctuations of a cavity optical field and a measurement is performed on the optical field exiting the cavity. We compare measurement sensitivities obtained with coherent probing and quantum-enhanced probing of the mechanical motion, i.e. the coherent probe field carries vacuum states and quadrature squeezed vacuum states at sideband frequencies, respectively. We find that quantum-enhanced probing provides little to no improvement in motion sensing for resonators in the unresolved sideband regime but may significantly increase measurement sensitivities for resonators in the resolved sideband regime.
This research focuses on advanced noise suppression technologies for high-precision measurement systems, particularly addressing the limitations of classical noise reducing approaches. The noise level of laser sources is a crucial factor that directly affects the measurement sensitivity in applications such as gravitational wave detection and biomedical imaging. Classical feedback control technologies are effective but often encounter a bottleneck resulting from the classical noise suppression limits. To cope with these challenges, a novel method integrating quantum squeezed light with classical feedback control systems to reduce intensity noise is proposed in this work. By employing an amplitude-squeezed light field, a quantum-enhanced feedback control model is developed, thereby theoretically examining the influence of both the feedback loop gain and the degree of squeezing on the noise suppression performance. The results show that the injection of squeezed light significantly reduces the intensity noise, approaching the shot noise limit (SNL), thereby improving the system sensitivity beyond the classical noise reduction boundaries. Specifically, –10 dB squeezed state injection into the feedback system yields an additional noise suppression of approximately 8.97 dB, exceeding what is achievable using classical feedback alone. This demonstrates that the potential of the proposed method can enhance measurement precision close to the quantum noise limits without increasing the laser power. The analysis highlights the asymmetric noise suppression effects between the inner feedback loop and outer feedback loop. Although the outer loop benefits significantly from the squeezed light injection and achieves noise levels that are unattainable by classical feedback methods, the inner loop shows relatively minor improvements. This asymmetry is attributed to the inherent characteristics of quantum squeezing and the limitations of the feedback loop design. Further investigation into the individual noise components reveals that the primary contributors to the intensity noise include input noise, photodetector noise, and beam splitter-induced vacuum fluctuations. The injection of squeezed light effectively mitigates these vacuum fluctuations, which are typically a major noise source in high-precision laser systems. Theoretical research results show that the use of squeezed light in feedback control systems can effectively enhance noise suppression, equivalent to a nine fold increase in detected optical power, without the physical drawbacks of increasing laser power such as thermal noise. In conclusion, this study provides a theoretical validation of combining quantum squeezed states with classical feedback control to exceed classical noise suppression limits. The integration of a –10 dB squeezed state demonstrates a significant noise reduction, showing that this hybrid approach could revolutionize noise management in precision measurement applications. The results pave the way for further exploring quantum-enhanced control technologies in fields such as gravitational wave detection, quantum communication, and advanced optical sensing, providing a pathway for improving sensitivity and noise suppression without increasing additional power requirements.