We present the development of the multistate multireference second-order perturbation theory (CASPT2) with multiroot references, which are described using the density matrix renormalization group (DMRG) method to handle a large active space. The multistate first-order wave functions are expanded into the internally contracted (IC) basis of the single-state single-reference (SS-SR) scheme, which is shown to be the most feasible variant to use DMRG references. The feasibility of the SS-SR scheme comes from two factors: first, it formally does not require the fourth-order transition reduced density matrix (TRDM) and second, the computational complexity scales linearly with the number of the reference states. The extended multistate (XMS) treatment is further incorporated, giving suited treatment of the zeroth-order Hamiltonian despite the fact that the SS-SR based IC basis is not invariant with respect to the XMS rotation. In addition, the state-specific fourth-order reduced density matrix (RDM) is eliminated in an approximate fashion using the cumulant reconstruction formula, as also done in the previous state-specific DMRG-cu(4)-CASPT2 approach. The resultant method, referred to as DMRG-cu(4)-XMS-CASPT2, uses the RDMs and TRDMs of up to third-order provided by the DMRG calculation. The multistate potential energy curves of the photoisomerization of diarylethene derivatives with CAS(26e,24o) are presented to illustrate the applicability of our theoretical approach.
We present the development of the multistate multireference second-order perturbation theory (CASPT2) with multiroot references, which are described using the density matrix renormalization group (DMRG) method to handle a large active space. The multistate first-order wave functions are expanded into the internally contracted (IC) basis of the single-state single-reference (SS-SR) scheme, which is shown to be the most feasible variant to use DMRG references. The feasibility of the SS-SR scheme comes from two factors: first, it formally does not require the fourth-order transition reduced density matrix (TRDM) and second, the computational complexity scales linearly with the number of the reference states. The extended multistate (XMS) treatment is further incorporated, giving suited treatment of the zeroth-order Hamiltonian despite the fact that the SS-SR based IC basis is not invariant with respect to the XMS rotation. In addition, the state-specific fourth-order reduced density matrix (RDM) is eliminated in an approximate fashion using the cumulant reconstruction formula, as also done in the previous state-specific DMRG-cu(4)-CASPT2 approach. The resultant method, referred to as DMRG-cu(4)-XMS-CASPT2, uses the RDMs and TRDMs of up to third-order provided by the DMRG calculation. The multistate potential energy curves of the photoisomerization of diarylethene derivatives with CAS(26e,24o) are presented to illustrate the applicability of our theoretical approach.
We report an extension of our previous development that incorporated quantum-chemical density matrix renormalization group (DMRG) into the complete active space second-order perturbation theory (CASPT2) [Y. Kurashige and T. Yanai, J. Chem. Phys. 135, 094104 (2011)]. In the previous study, the combined theory, referred to as DMRG-CASPT2, was built upon the use of pseudo-canonical molecular orbitals (PCMOs) for one-electron basis. Within the PCMO basis, the construction of the four-particle reduced density matrix (4-RDM) using DMRG can be greatly facilitated because of simplicity in the multiplication of 4-RDM and diagonal Fock matrix in the CASPT2 equation. In this work, we develop an approach to use more suited orbital basis in DMRG-CASPT2 calculations, e.g., localized molecular orbitals, in order to extend the domain of applicability. Because the multiplication of 4-RDM and generalized Fock matrix is no longer simple in general orbitals, an approximation is made to it using the cumulant reconstruction neglecting higher-particle cumulants. Also, we present the details of the algorithm to compute 3-RDM of the DMRG wavefunction as an extension of the 2-RDM algorithm of Zgid et al. [J. Chem. Phys. 128, 144115 (2008)] and Chan et al. [J. Chem. Phys. 128, 144117 (2008)]. The performance of the extended DMRG-CASPT2 approach was examined for large-scale multireference systems, such as low-lying excited states of long-chain polyenes and isomerization potential of {[Cu(NH3)3]2O2}(2+).
The complete active space second order perturbation theory (CASPT2) can be extended to larger active spaces by using the density matrix renormalization group (DMRG) as solver. Two variants are commonly used: the costly DMRG-CASPT2 with exact 4-particle reduced density matrix (4-RDM) and the cheaper DMRG-cu(4)-CASPT2 in which the 4-cumulant is discarded. To assess the accuracy and limitations of the latter variant DMRG-cu(4)-CASPT2 we study the spin state energetics of iron porphyrin Fe(P) and its model compound FeL2, a model for the active center of NiFe hydrogenase, and manganese-oxo porphyrin MnO(P)(+); a series of excited states of chromium hexacarbonyl Cr(CO)6; and the interconversion of two Cu2O2(2+) isomers. Our results clearly show that PT2 on top of DMRG is essential in order to obtain quantitative results for transition metal complexes. Good results were obtained with DMRG-cu(4)-CASPT2 as compared to full CASPT2 and DMRG-CASPT2 in calculations with small- and medium-sized active spaces. In calculations with large-sized active spaces (∼30 active orbitals), the performance of DMRG-cu(4)-CASPT2 is less impressive due to the errors originating from both the finite number of renormalized states m and the 4-RDM approximation.
We present two efficient and intruder-free methods for treating dynamic correlation on top of general multiconfiguration reference wave functions — including such as obtained by the density matrix renormalization group (DMRG) with large active spaces. The new methods are the second order variant of the recently proposed multireference linearized coupled cluster method (MRLCC) [Sharma, S.; Alavi, A. J. Chem. Phys. 2015, 143, 102815] and of N-electron valence perturbation theory (NEVPT2), with expected accuracies similar to MRCI+Q and (at least) CASPT2, respectively. Great efficiency gains are realized by representing the first order wave function with a combination of internal contraction (IC) and matrix product state perturbation theory (MPSPT). With this combination, only third order reduced density matrices (RDMs) are required. Thus, we obviate the need for calculating (or estimating) RDMs of fourth or higher order; these had so far posed a severe bottleneck for dynamic correlation treatments involving the large active spaces accessible to DMRG. Using several benchmark systems, including first and second row containing small molecules, Cr 2, pentacene, and oxo-Mn(Salen), we show that active spaces containing at least 30 orbitals can be treated using this method. On a single node, MRLCC2 and NEVPT2 calculations can be performed with over 550 and 1100 virtual orbitals, respectively. We also critically examine the errors incurred due to the three sources of errors introduced in the present implementation – calculating second order instead of third order energy corrections, use of internal contraction, and approximations made in the reference wave function due to DMRG.
We present a second-order perturbation theory based on a density matrix renormalization group self-consistent field (DMRG-SCF) reference function. The method reproduces the solution of the complete active space with second-order perturbation theory (CASPT2) when the DMRG reference function is represented by a sufficiently large number of renormalized many-body basis, thereby being named DMRG-CASPT2 method. The DMRG-SCF is able to describe non-dynamical correlation with large active space that is insurmountable to the conventional CASSCF method, while the second-order perturbation theory provides an efficient description of dynamical correlation effects. The capability of our implementation is demonstrated for an application to the potential energy curve of the chromium dimer, which is one of the most demanding multireference systems that require best electronic structure treatment for non-dynamical and dynamical correlation as well as large basis sets. The DMRG-CASPT2/cc-pwCV5Z calculations were performed with a large (3d double-shell) active space consisting of 28 orbitals. Our approach using large-size DMRG reference addressed the problems of why the dissociation energy is largely overestimated by CASPT2 with the small active space consisting of 12 orbitals (3d4s), and also is oversensitive to the choice of the zeroth-order Hamiltonian.
We present an extended implementation of the multireference configuration interaction (MRCI) method combined with the quantum-chemical density matrix renormalization group (DMRG). In the previous study, we introduced the combined theory, referred to as DMRGMRCI, as a method to calculate high-level dynamic electron correlation on top of the DMRG wave function that accounts for active-space (or strong) correlation using a large number of active orbitals. The DMRG-MRCI method is built on the full internal-contraction scheme for the compact reference treatment and on the cumulant approximation for the treatment of the four-particle rank reduced density matrix (4-RDM). The previous implementation achieved the MRCI calculations with the active space (24e,24o), which are deemed the record largest, whereas the inherent Nact 8 × N complexity of computation was found a hindrance to using further large active space. In this study, an extended optimization of the tensor contractions is developed by explicitly incorporating the rank reduction of the decomposed form of the cumulant-approximated 4-RDM into the factorization. It reduces the computational scaling (to Nact7 × N) as well as the cache-miss penalty associated with direct evaluation of complex cumulant reconstruction. The present scheme, however, faces the increased complexity of factorization patterns for optimally implementing the tensor contraction terms involving the decomposed 4-RDM objects. We address this complexity using the enhanced symbolic manipulation computer program for deriving and coding programmable equations. The new DMRG-MRCI implementation is applied to the determination of the stability of the iron(IV)-oxo porphyrin relative to the iron(V) electronic isomer (electromer) using the active space (29e,29o) (including four second d-shell orbitals of iron) with triple-ζ-quality atomic orbital basis sets. The DMRG-cu(4)-MRCI+Q model is shown to favor the triradicaloid iron(IV)-oxo state as the lowest energy state and characterize the iron(V) electromer as thermally inaccessible, supporting the earlier experimental and density functional studies. This conflicts with the previous MR calculations using the restricted activespace second-order perturbation theory (RASPT2) with the similar-size active space (29e,28o) reported by Pierloot et al. (Radoń, M.; Broclawik, E.; Pierloot, K. J. Chem. Theory Comput. 2011, 7, 898), showing that the hypothetical iron(V) state indicated by recent laser flash photolysis (LFP) studies is likely thermally accessible because of its underestimated relative energy.
This paper describes an interface between the density matrix renormalization group (DMRG) method and the complete active-space self-consistent field (CASSCF) method and its analytical gradient, as well as an extension to the second-order perturbation theory (CASPT2) method. This interfacing allows large active-space multi-reference computations to be easily performed. The interface and its extension are both implemented in terms of reduced density matrices (RDMs) which can be efficiently computed via the DMRG sweep algorithm. We also present benchmark results showing that, in practice, the DMRG-CASSCF calculations scale with active-space size in a polynomial manner in the case of quasi-1D systems. Geometry optimization of a binuclear iron-sulfur cluster using the DMRG-CASSCF analytical gradient is demonstrated, indicating that the inclusion of the valence p-orbitals of sulfur and double-shell d-orbitals of iron lead to non-negligible changes in the geometry compared to the results of small active-space calculations. With the exception of the selection of M values, many computational settings in these practical DMRG calculations have been tuned and black-boxed in our interface, and so the resulting DMRG-CASSCF and DMRG-CASPT2 calculations are now available to novice users as a common tool to compute strongly correlated electronic wavefunctions.