Fully Internally Contracted Multireference Configuration Interaction Theory Using Density Matrix Renormalization Group: A Reduced-Scaling Implementation Derived by Computer-Aided Tensor Factorization
We present an extended implementation of the multireference configuration interaction (MRCI) method combined with the quantum-chemical density matrix renormalization group (DMRG). In the previous study, we introduced the combined theory, referred to as DMRGMRCI, as a method to calculate high-level dynamic electron correlation on top of the DMRG wave function that accounts for active-space (or strong) correlation using a large number of active orbitals. The DMRG-MRCI method is built on the full internal-contraction scheme for the compact reference treatment and on the cumulant approximation for the treatment of the four-particle rank reduced density matrix (4-RDM). The previous implementation achieved the MRCI calculations with the active space (24e,24o), which are deemed the record largest, whereas the inherent Nact 8 × N complexity of computation was found a hindrance to using further large active space. In this study, an extended optimization of the tensor contractions is developed by explicitly incorporating the rank reduction of the decomposed form of the cumulant-approximated 4-RDM into the factorization. It reduces the computational scaling (to Nact7 × N) as well as the cache-miss penalty associated with direct evaluation of complex cumulant reconstruction. The present scheme, however, faces the increased complexity of factorization patterns for optimally implementing the tensor contraction terms involving the decomposed 4-RDM objects. We address this complexity using the enhanced symbolic manipulation computer program for deriving and coding programmable equations. The new DMRG-MRCI implementation is applied to the determination of the stability of the iron(IV)-oxo porphyrin relative to the iron(V) electronic isomer (electromer) using the active space (29e,29o) (including four second d-shell orbitals of iron) with triple-ζ-quality atomic orbital basis sets. The DMRG-cu(4)-MRCI+Q model is shown to favor the triradicaloid iron(IV)-oxo state as the lowest energy state and characterize the iron(V) electromer as thermally inaccessible, supporting the earlier experimental and density functional studies. This conflicts with the previous MR calculations using the restricted activespace second-order perturbation theory (RASPT2) with the similar-size active space (29e,28o) reported by Pierloot et al. (Radoń, M.; Broclawik, E.; Pierloot, K. J. Chem. Theory Comput. 2011, 7, 898), showing that the hypothetical iron(V) state indicated by recent laser flash photolysis (LFP) studies is likely thermally accessible because of its underestimated relative energy.
We present an extended implementation of the multireference configuration interaction (MRCI) method combined with the quantum-chemical density matrix renormalization group (DMRG). In the previous study, we introduced the combined theory, referred to as DMRGMRCI, as a method to calculate high-level dynamic electron correlation on top of the DMRG wave function that accounts for active-space (or strong) correlation using a large number of active orbitals. The DMRG-MRCI method is built on the full internal-contraction scheme for the compact reference treatment and on the cumulant approximation for the treatment of the four-particle rank reduced density matrix (4-RDM). The previous implementation achieved the MRCI calculations with the active space (24e,24o), which are deemed the record largest, whereas the inherent Nact 8 × N complexity of computation was found a hindrance to using further large active space. In this study, an extended optimization of the tensor contractions is developed by explicitly incorporating the rank reduction of the decomposed form of the cumulant-approximated 4-RDM into the factorization. It reduces the computational scaling (to Nact7 × N) as well as the cache-miss penalty associated with direct evaluation of complex cumulant reconstruction. The present scheme, however, faces the increased complexity of factorization patterns for optimally implementing the tensor contraction terms involving the decomposed 4-RDM objects. We address this complexity using the enhanced symbolic manipulation computer program for deriving and coding programmable equations. The new DMRG-MRCI implementation is applied to the determination of the stability of the iron(IV)-oxo porphyrin relative to the iron(V) electronic isomer (electromer) using the active space (29e,29o) (including four second d-shell orbitals of iron) with triple-ζ-quality atomic orbital basis sets. The DMRG-cu(4)-MRCI+Q model is shown to favor the triradicaloid iron(IV)-oxo state as the lowest energy state and characterize the iron(V) electromer as thermally inaccessible, supporting the earlier experimental and density functional studies. This conflicts with the previous MR calculations using the restricted activespace second-order perturbation theory (RASPT2) with the similar-size active space (29e,28o) reported by Pierloot et al. (Radoń, M.; Broclawik, E.; Pierloot, K. J. Chem. Theory Comput. 2011, 7, 898), showing that the hypothetical iron(V) state indicated by recent laser flash photolysis (LFP) studies is likely thermally accessible because of its underestimated relative energy.
We report development of the multireference configuration interaction (MRCI) method that can use active space scalable to much larger size references than has previously been possible. The recent development of the density matrix renormalization group (DMRG) method in multireference quantum chemistry offers the ability to describe static correlation in a large active space. The present MRCI method provides a critical correction to the DMRG reference by including high-level dynamic correlation through the CI treatment. When the DMRG and MRCI theories are combined (DMRG-MRCI), the full internal contraction of the reference in the MRCI ansatz, including contraction of semi-internal states, plays a central role. However, it is thought to involve formidable complexity because of the presence of the five-particle rank reduced-density matrix (RDM) in the Hamiltonian matrix elements. To address this complexity, we express the Hamiltonian matrix using commutators, which allows the five-particle rank RDM to be canceled out without any approximation. Then we introduce an approximation to the four-particle rank RDM by using a cumulant reconstruction from lower-particle rank RDMs. A computer-aided approach is employed to derive the exceedingly complex equations of the MRCI in tensor-contracted form and to implement them into an efficient parallel computer code. This approach extends to the size-consistency-corrected variants of MRCI, such as the MRCI+Q, MR-ACPF, and MR-AQCC methods. We demonstrate the capability of the DMRG-MRCI method in several benchmark applications, including the evaluation of single-triplet gap of free-base porphyrin using 24 active orbitals.
The recent development of the density matrix renormalization group (DMRG) method in multireference quantum chemistry makes it practical to evaluate static correlation in a large active space, while dynamic correlation provides a critical correction to the DMRG reference for strong-correlated systems and is usually obtained using multireference perturbation (MRPT) or configuration interaction (MRCI) methods with internal contraction (ic) approximation. These methods can use an active space scalable to relatively larger size references than has previously been possible. However, they are still hardly applicable to systems with an active space larger than 30 orbitals and/or a large basis set because of high computation and storage costs of high-order reduced density matrices (RDMs) and the crucial dependence of the MRCI Hamiltonian dimension on the number of virtual orbitals. In this work, we propose a new effective implementation of DMRG-MRCI, in which we use reconstructed CASCI-type configurations from DMRG wave function via the entropy-driving genetic algorithm (EDGA) [Luo et al. J. Chem. Theory Comput. 2017, 13, 4699−4710.] and integrate it with MRCI by an external contraction (ec) scheme. This bypasses the bottleneck of computing high-order RDMs in traditional DMRG dynamic correlation methods with ic approximation, and the number of MRCI configurations is not dependent on the number of virtual orbitals. Therefore, the DMRG-ec-MRCI method is promising for dealing with a larger active space than 30 orbitals and large basis sets. We demonstrate the capability of our DMRG-ec-MRCI method in several benchmark applications, including the evaluation of the potential energy curve of Cr 2, single-triplet gaps of higher n-acene molecules, and the energy of the Eu-BTBP(NO 3 ) 3 complex.
We present two efficient and intruder-free methods for treating dynamic correlation on top of general multiconfiguration reference wave functions — including such as obtained by the density matrix renormalization group (DMRG) with large active spaces. The new methods are the second order variant of the recently proposed multireference linearized coupled cluster method (MRLCC) [Sharma, S.; Alavi, A. J. Chem. Phys. 2015, 143, 102815] and of N-electron valence perturbation theory (NEVPT2), with expected accuracies similar to MRCI+Q and (at least) CASPT2, respectively. Great efficiency gains are realized by representing the first order wave function with a combination of internal contraction (IC) and matrix product state perturbation theory (MPSPT). With this combination, only third order reduced density matrices (RDMs) are required. Thus, we obviate the need for calculating (or estimating) RDMs of fourth or higher order; these had so far posed a severe bottleneck for dynamic correlation treatments involving the large active spaces accessible to DMRG. Using several benchmark systems, including first and second row containing small molecules, Cr 2, pentacene, and oxo-Mn(Salen), we show that active spaces containing at least 30 orbitals can be treated using this method. On a single node, MRLCC2 and NEVPT2 calculations can be performed with over 550 and 1100 virtual orbitals, respectively. We also critically examine the errors incurred due to the three sources of errors introduced in the present implementation – calculating second order instead of third order energy corrections, use of internal contraction, and approximations made in the reference wave function due to DMRG.
The implementation of multireference configuration interaction (MRCI) methods in quantum systems with large active spaces is hindered by the expansion of configuration bases or the intricate handling of reduced density matrices (RDMs). In this work, we present a spin-adapted renormalized-residue-based MRCI (RR-MRCI) approach that leverages renormalized residues to effectively capture the entanglement between active and inactive orbitals. This approach is reinforced by a novel efficient algorithm, which also facilitates an efficient deployment of spin-adapted matrix product state MRCI (MPS-MRCI). The RR-MRCI framework possesses several advantages: (1) It considers the orbital entanglement and utilizes highly compressed MPS structure, improving computational accuracy and efficiency compared with internally contracted (ic) MRCI. (2) Utilizing small-sized buffer environments of a few external orbitals as probes based on quantum information theory, it enhances computational efficiency over MPS-MRCI and offers potential application to large molecular systems. (3) The RR framework can be implemented in conjunction with ic-MRCI, eliminating the need for high-rank RDMs, by using distinct renormalized residues. We evaluated this method across nine diverse molecular systems, including Cu 2 O 2 2+ with an active space of (24e,24o) and two complexes of lanthanide and actinide with active space (38e,36o), demonstrating the method’s versatility and efficacy.
Thanks to the high compression of the matrix product state (MPS) form of the wave function and the efficient site-by-site iterative sweeping optimization algorithm, the density matrix normalization group (DMRG) and its time-dependent variant (TD-DMRG) have been established as powerful computational tools in accurately simulating the electronic structure and quantum dynamics of strongly correlated molecules with a large number (10 1–2 ) of quantum degrees of freedom (active orbitals or vibrational modes). However, the quantitative characterization of the quantum many-body behaviors of realistic strongly correlated systems requires a further consideration of the interaction between the embedded active subsystem and the remaining correlated environment, e.g., a larger number (10 2–3 ) of external orbitals in electronic structure or infinite condensed-phase phononic modes in nucleus dynamics. To this end, we introduced three new post-DMRG and TD-DMRG approaches, namely (1) DMRG2sCI-MRCI and DMRG2sCI-ENPT by the reconstruction of selected configuration interaction (sCI) type of compact reference function from DMRG coefficients and the use of externally contracted MRCI (multireference configuration interaction) and Epstein–Nesbet perturbation theory (ENPT), without recourse to the expensive high order n -electron reduced density matrices ( n -RDMs). (2) DMRG combined with RR-MRCI (renormalized residue-based MRCI), which improves the computational accuracy and efficiency of internally contracted (ic) MRCI by renormalizing the contracted bases with small-sized buffer environment(s) of a few external orbitals as probes based on quantum information theory. (3) HM (hierarchical mapping)-TD-DMRG in which a large environment is reduced to a small number of renormalized environmental modes (which accounts for the most vital system–environment interactions) through stepwise mapping transformation. These advances extend the efficacy of highly accurate DMRG/TD-DMRG computations to the quantitative characterization of the electronic structure and quantum dynamics in realistic strongly correlated systems coupled with large environments and are reviewed in this paper.
We report an extension of our previous development that incorporated quantum-chemical density matrix renormalization group (DMRG) into the complete active space second-order perturbation theory (CASPT2) [Y. Kurashige and T. Yanai, J. Chem. Phys. 135, 094104 (2011)]. In the previous study, the combined theory, referred to as DMRG-CASPT2, was built upon the use of pseudo-canonical molecular orbitals (PCMOs) for one-electron basis. Within the PCMO basis, the construction of the four-particle reduced density matrix (4-RDM) using DMRG can be greatly facilitated because of simplicity in the multiplication of 4-RDM and diagonal Fock matrix in the CASPT2 equation. In this work, we develop an approach to use more suited orbital basis in DMRG-CASPT2 calculations, e.g., localized molecular orbitals, in order to extend the domain of applicability. Because the multiplication of 4-RDM and generalized Fock matrix is no longer simple in general orbitals, an approximation is made to it using the cumulant reconstruction neglecting higher-particle cumulants. Also, we present the details of the algorithm to compute 3-RDM of the DMRG wavefunction as an extension of the 2-RDM algorithm of Zgid et al. [J. Chem. Phys. 128, 144115 (2008)] and Chan et al. [J. Chem. Phys. 128, 144117 (2008)]. The performance of the extended DMRG-CASPT2 approach was examined for large-scale multireference systems, such as low-lying excited states of long-chain polyenes and isomerization potential of {[Cu(NH3)3]2O2}(2+).