This thesis deals with controlled interactions between superconducting circuit elements for quantum computation and simulation applications. First, the electrical design and measurements of transmon type qubits, which are coupled to superconducting resonators, are presented. Secondly the controllable coupling of superconducting microwave resonators via an rf SQUID is experimentally investigated. Thirdly, a theoretical discussion about interaction and entanglement of a microwave resonator with a nanomechanical beam via an rf SQUID is discussed.
This thesis deals with controlled interactions between superconducting circuit elements for quantum computation and simulation applications. First, the electrical design and measurements of transmon type qubits, which are coupled to superconducting resonators, are presented. Secondly the controllable coupling of superconducting microwave resonators via an rf SQUID is experimentally investigated. Thirdly, a theoretical discussion about interaction and entanglement of a microwave resonator with a nanomechanical beam via an rf SQUID is discussed.
This thesis presents a detailed investigation of coherent tunable coupling between two coupled quantum circuits. Quantum circuits have the potential to be used as the fundamental building blocks in quantum processors. Any large scale quantum processor will be composed of a large number of these coupled circuits. The efficient implementation of quantum algorithms will be difficult without a reliable mechanism for controlling the interaction strength between coupled systems, while preserving the delicate quantum information stored in the coherent superpositions of quantum states. We show that a flux-biased rf-SQUID can be used to coherently mediate the interaction between two coupled quantum circuits, a phase qubit and LC resonator. This interaction results from an effective mutual inductance between the qubit and resonator as a result of their direct coupling to the rf-SQUID. The sign and magnitude of this effective mutual inductance can be tuned with applied flux to the rf-SQUID, thus controlling the coupled interactions over a large range. We observe the modulation in coupling strength using measurements in both the frequency and time domains. The measurements are shown to agree well with theoretical predictions. This thesis discusses all aspects of the experiments from a theoretical description of each component to the design, fabrication, experimental setup and measurements.
This thesis explores nonlinear couplings in superconducting circuits with the purpose of achieving quantum control over the elementary excitations of light and motion. It consists mainly of three research themes. The first theme concerns the experimental realisation of a tuneable coupling scheme, giving rise to different interactions with adjustable ratios, between two transmon qubits. The tuneable capabilities of the device together with its versatile geometry and high coherence make it an interesting building block for analog quantum simulators of certain classes of complex problems. The second theme concerns two theoretical proposals for controlling mechanical resonators using transmon qubits. In the first part we analyse an electromechanical circuit architecture giving rise to tuneable three-body interactions between two qubits and a mechanical beam. Several protocols are performed numerically demonstrating ground-state cooling and the creation of mechanical quantum states, such as single-phonon and multi-phonon superposition states as well as qubit-phonon entanglement. Additionally, schemes for generating arbitrary quantum states are explored. The second part relies on the same concept for coupling a mechanical resonator to a transmon qubit and explores the qubit-resonator system in the ultrastrong coupling regime, where the optomechanical coupling approaches or even exceeds the mechanical frequency. We find that for certain coupling strengths ground-state cooling is possible and devise a protocol for generating macroscopic quantum superposition states, known as “Shrödinger cats”, on the mechanical resonator. Finally, the third research theme presented in the thesis concerns an experiment where a cold superconducting qubit is employed to readout and control a thermally populated radio-frequency resonator coupled via a strong dispersive coupling. By means of reservoir engineering, ground-state cooling as well as stabilisation of Fock states in the resonator are demonstrated reaching a new operating regime for circuit quantum electrodynamics.
The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.
One of the key elements in circuit quantum electrodynamics (cQED) is the superconducting microwave resonator, which can enable strong coupling to and between nanoscale quantum systems, and as a result has emerged as an essential tool for both quantum information and quantum sensing. In this thesis, I will discuss new applications of superconducting resonators in both of these fields, which illustrates how quantum information and quantum sensing can be strongly tied together. As the field of quantum information continues to grow, various platforms for realizing a quantum computer have been proposed. One attractive platform is to control and manipulate the spin of an electron to form spin qubits, which have demonstrated a long coherence time, weak coupling to the environment, and high fidelity single- and two-qubit gates. However, scaling beyond two qubits has proven challenging, as has incorporating long-range coupling, although both are crucial for making spin qubits a scalable quantum computing platform. The confinement of electromagnetic fields in superconducting resonators enables strong coupling to small systems, such as the single electrons of a spin qubit. In the first part of this thesis, I will describe how a singlet-triplet spin qubit coupled to a high-impedance superconducting resonator constitutes a promising architecture for mediating long-ranged interactions based on a longitudinal coupling between the resonator and qubit. I will discuss the technical developments needed to successfully implement this novel type of interaction in a hybrid spin qubit-resonator device. This type of interaction has several advantages over the more commonly studied transverse coupling scheme: it does not require careful tuning of the qubit frequency to match that of the resonator, which facilitates scaling to a large number of qubits, and also avoids the loss of coherence, which is inevitable in resonant coupling. This type of interaction therefore opens promising paths for generating high-fidelity long-ranged two-qubit coupling by employing superconducting microwave resonators. By adapting techniques used in quantum information, we have also developed a new technique in quantum sensing, where we employ superconducting resonators as a probe of quantum materials such as mesoscopic systems, two-dimensional materials, and heterostructures, which are otherwise challenging to experimentally access with conventional techniques. In the second part of my thesis, I will discuss how implementing cQED techniques from quantum information allows us to probe the symmetry of the order parameter in unconventional superconductors. Unconventional superconductors are not readily available, and we therefore study an engineered system that comprises of interfacing a ferromagnet and superconductor, in which unconventional pairing can be induced into the ferromagnet. This platform allows us to simultaneously excite spin waves, a collective excitation of spins, in the ferromagnet, which opens new directions for studying interactions between coherently coupled magnons (quanta of spin waves) and unconventional superconducting states. Finally, by applying the same technique to a two-dimensional (2D) superconductor, tungsten ditelluride, we leverage this platform in an attempt to study the order parameter of its intrinsic superconducting phase. The nature of the order parameter in this material remains an open question, as both topological and superconducting phases can exist, possibly simultaneously. This work thus demonstrates a unique use of superconducting resonators beyond quantum information applications.
In this thesis, measurements on superconducting electrical circuits that exhibit quantum mechanical effects are presented. Nonlinear superconducting circuits can be regarded as artificial atoms with energy spectra that can be engineered. The artificial atoms can be used as quantum bits for quantum computation. By coupling the artificial atoms to the electromagnetic field inside a transmission line resonator, quantum optical effects can be studied in these electrical circuits.The possibility of using a frequency tunable transmission line resonators for coupling of superconducting quantum bits is investigated. Tunable superconducting resonators consisting of coplanar waveguide structures, terminated to ground in one end via a superconducting quantum interference device (SQUID), are characterized. By applying a magnetic field to the SQUID loop, the boundary condition of the resonator changes leading to a change in resonance frequency.A change of the resonance frequency by more than 250 linewidths is demonstrated. It is also demonstrated that the resonator can be tune by several hundred MHz on a time scale that is much shorter than the photon lifetime of the resonator.Circuits containing both one and two transmon qubits coupled to the resonator are characterized. Quantum mechanical interactions between the resonator and the qubits, in form of vacuum Rabi splitting, are observed. Coherent control of a single qubit coupled to the resonator is demonstrated by performing Rabi oscillations of the qubit. In the two qubit case, coherent interaction between the qubits is observed in terms of a nonlinear scaling of the coupling strength between the resonator and the collective two qubit system.Measurements on a strongly driven single Cooper-pair box, using a quantum capacitance readout, are also presented. A rich structure in the response is well explained in terms of longitudinal dressed states of the single-Cooper pair box.When measuring the response of a single-electron box, a gate dependent excess dissipation is observed. The dissipation is understood by considering the internal dynamics of the single electron box. The excess dissipation is modeled as an effective resistance named the Sisyphus resistance.
In this work we show that a tunable coupling between microwave resonators can be engineered by means of simple Josephson junctions circuits, such as dc and rf superconducting quantum interference devices. We show that by controlling the time dependence of the coupling it is possible to switch on and off and modulate the cross-talk and boost the interaction towards the ultrastrong regime, as well as to engineer red and blue sideband couplings, nonlinear photon hopping, and classical gauge fields. We discuss how these dynamically tunable superconducting circuits enable key applications in the fields of all-optical quantum computing, continuous-variable quantum information, and quantum simulation---all within the reach of the state of the art in circuit-QED experiments.