A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 → F′ = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 μGal/Hz1/2 and a resolution of better than 1 μGal (1 μGal = 1 × 10−8 m/s2) in an integration time of 3000 s.
We describe an optical bench in which we lock the relative frequencies or phases of a set of three lasers in order to use them in a cold atoms interferometry experiment. As a new feature, the same two lasers serve alternately to cool atoms and to realize the atomic interferometer. This requires a fast change of the optical frequencies over a few GHz. The number of required independent laser sources is then only 3, which enables the construction of the whole laser system on a single transportable optical bench. Recent results obtained with this optical setup are also presented. c © 2005 Optical Society of America OCIS codes: 140.3320, 120.3180, 140.3550, 120.3930. Within the last decades, atom interferometers have de-veloped into a highly competitive tool for precision measurements.1 Atomic fountains used as atomic clocks are the best realization of the time unit.2 Atom inter-ferometry also promises sensors to be highly sensitive to inertial forces.3–6 The use of stimulated Raman transi-tions to manipulate the atomic wave packet has proven to be an efficient way to obtain high accuracy devices.5, 6
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.
In this paper, we report the design, implementation and experimental results of a portable, compact cold Cs atom physics package for atom interferometer experiments. With the physics package, we trapped and deep-cooled Cs atoms to ultracold temperatures of <; 5 μK. The deep-cooling method used in this work is relatively simple and effective, with which we obtained controlled temperature adjustment between 5 and 80 μK. The portability of the physics package makes it suitable for implementing atom interferometry with various interrogation configurations and relative orientations. The system is also good for studies of compact cold atom frequency standards. With the Raman laser and light pulse manipulation system we developed in this work, this portable cold Cs atom physics package is being used for atom interferometer experiments in our laboratory.
Ushered forth by advances in time and frequency metrology, atom interferometry remains an indispensable measurement tool in atomic physics due to its precision and versatility. A sequence of four
pi/2 beam splitter pulses can create either an interferometer sensitive to the atom's recoil frequency when the momentum imparted by the light reverses direction between pulse pairs or, when constructed from pulses without such reversal, sensitive to the perturbing potential from an external optical field. Here, we demonstrate the first atom interferometer with laser-cooled lithium, advantageous for its low mass and simple atomic structure. We study both a recoil-sensitive Ramsey-Bord\\'e interferometer and interferometry sensitive to the dynamic polarizability of the ground state of lithium. Recoil-sensitive Ramsey-Bord\\'e interferometry benefits from lithium's high recoil frequency, a consequence of its low mass. At an interrogation time of 10 ms, a Ramsey-Bord\\'e lithium interferometer could achieve sensitivities comparable to those realized at much longer times with heavier alkali atoms. However, in contrast with other atoms that are used for atom interferometry, lithium's unresolved excited-state hyperfine structure precludes the the cycling transition necessary for efficient cooling. Without sub-Doppler cooling techniques. As as result, a lithium atomic gas is typically laser cooled to temperatures around 300
muK, above the Doppler limit, and well above the recoil temperature of 6
muK. This higher temperature gas expands rapidly during the operation of an atom interferometer, limiting the experimental interrogation time and preventing spatially resolved detection. In this work, a light-pulse lithium matter-wave interferometer is demonstrated in spite of these limitation. Two-photon Raman interferometer pulses coherently couple the atom's spin and momentum and are thus able to spectrally resolve the outputs. These fast pulses drive conjugate interferometers simultaneously which beat with a fast frequency component proportional to the atomic recoil frequency and an envelope modulated by the two-photon detuning of the Raman transition. We detect the summed signal at short experimental times, preventing perturbation of the signal from vibration noise. This demonstration of a sub-recoil measurement with a super-recoil sample opens the door to similar scheme with other particles that are difficult to trap and cool well, like electrons. An interferometer instead composed of
pi/2-pulses with a single direction of momentum transfer, can be sensitive to the dynamic polarizability of the atomic ground state. By scanning the frequency of an external driving field, such a measurement can be used to determine the atom's tune-out wavelength. This is the wavelength at which the frequency-dependent polarizability vanishes due to compensating ac-Stark shifts from other atomic states. Lithium's simple atomic structure allows for a precise computation of properties with only {\\em ab initio} wave functions and spectroscopic data. A direct interferometric measurement of lithium's red tune-out wavelength at 670.971626(1) nm, is a precise comparison to existing `all-order' atomic theory computations. It also provides another way to experimentally determine the
S− to
P− transitions matrix elements, for which large correlations and small values complicate computations. Finally, a future measurement of lithium's ultraviolet tune-out wavelength of at 324.192(2) nm would be sensitive to relativistic approximations in the atomic structure description.Atom interferometry simultaneously verifies existing atomic theory with measurements of atomic properties and searches for exotic physics lurking in plain sight. The techniques developed here broaden the applicability of interferometry and increase measurement sensitivity by simplifying cooling, increasing atom number and reducing the cycle time. Overcoming the current experimental limitations on interrogation time would allow for ultra-precise measurements of both the tune-out wavelength and the fine structure constant.