Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Japan Institute of Metals and Materials

Velocity Distribution Control of Cesium Atoms by Frequency Modulated Diode Laser

Yuji Fukaya, Shunichi Sato

Published Jan 1, 2001• 0 citations
Publisher

Abstract

A simple control method for the velocity distribution of cesium atoms is demonstrated using a frequency modulated diode laser with a wider spectrum. Current to the diode laser was modulated and the laser spectrum was broadened to overlap the Doppler broadening of the atomic beam. The reduction of the atom velocity was achieved on the basis of the laser cooling technique and a single narrow peak at approximately 45 m/s was observed. From a view point of a novel purification process, the possibility to deflect this cooled cesium atomic beam was discussed to spatially separate the beam from impurities.

DOI
10.2320/jinstmet1952.65.6_534

Related papers

Cooling cesium atoms using diode lasers

Carl Wieman, R. N. Watts

We have cooled and stopped a beam of cesium atoms using frequency chirped diode lasers. In this technique, a moving atom absorbs and reemits many photons from a counter propagating laser that is frequency swept to keep it in resonance with an atomic transition. The resulting momentum transfer slows the atom. The basic approach is identical to that developed by Hall and co-workers, however, the use of diode lasers allows us to obtain the necessary frequency modulation simply by sweeping the laser injection current. We use two diode lasers tuned to each of the 6s hyperfine ground state levels to drive the 6s—6p3/2 transitions. Each laser is simultaneously swept over the Doppler profile of the 100°C thermal cesium beam to bring a substantial number to a stop. Using additional fast frequency modulation, the same lasers are used to probe the resulting velocity distribution. This technique allows us to bring ~106 atoms/cm3 to a temperature of 1 K. This method is an extremely simple and inexpensive way to produce cold atoms.

International Laser Science Conference•Jan 1, 1986•0 citations

Velocity Control of Cesium Atomic Beam Using Two Frequency-Modulated External-Cavity Diode Lasers

Toru Hirayama, Shunichi Sato

The velocity of a cesium atomic beam was controlled using two broadband frequency-modulated, external-cavity diode lasers. One laser beam was used to decelerate faster atoms and the other was used to accelerate slower atoms. The central velocity of the atoms was readily tuned in a wide range while maintaining the width and peak height of a velocity distribution. In addition, the velocity distribution of cesium atoms was calculated on the basis of the scattering force caused by two frequency-modulated laser beams. The calculated peak ratio was in good agreement with the experimental result.

Japanese Journal of Applied Physics•Nov 1, 2006•0 citations

The Diode Laser Manipulation Of Cesium Atoms (polarization, Stopping).

Richard N. Watts

The results of two experiments involving the rapid frequency modulation of diode lasers are presented. In the first experiment, a cesium beam of 10('14) atoms/sec is produced with more than 98% of the atoms in a single spin state. The beam is polarized by optically pumping it with a single diode laser whose frequency is switched between the 6s(F = 4)-6p(,3/2)(F = 5) and 6s(F = 3)-6p(,3/2)(F = 4) transitions at 100 kHz. To do this, the frequency response of a diode laser to changes in injection current was first determined and the injection current modified to force a jump of 9.2 GHz in 1.5 (mu)sec. The same laser is used to probe the atomic population distribution simultaneously. In the second experiment, two diode lasers, tuned to the 6s(F = 4)-6p(,3/2)(F = 5) and 6s(F = 3)-6p(,3/2)(F = 4) transitions, are used to cool and stop a beam of cesium atoms. The laser frequencies are swept to keep them in resonance with the slowing atoms. The same lasers are used to probe the resulting velocity distribution. More than 10('10) atoms/sec are slowed to a velocity of 0 (+OR-) 15 m/sec, corresponding to a temperature of 1(DEGREES)K. Both of these experiments demonstrate extremely simple and inexpensive ways to manipulate atomic cesium.

•Jan 1, 1986•0 citations

La température limite d'un jet atomique de césium ralenti par diode laser

Jean Dalibard, Christophe Salomon

The velocity distribution ofcesium atoms decelmated by a laser diode is measwed using a dye lasm with a narrow spectral width. The "stopped atoms" density is four times greatm than that ofthe free atomic beam at maximum of the Doppler distribution. The average quadratic velocity of these stopped atoms is 3 m/s, and is much lower than the width of the velocity class resonant with the lasm diode (25 m/s). The cooling observed is in good agreement with the simple theoretical mode1 presented in this Note. The possibility of using a "three-frequency" diode is also demonstrated.

•Jan 1, 1988•0 citations

Cooling of cesium atomic beam with light from spectrally broadened diode lasers

Yat C. Chan, Natarajan D. Bhaskar

We have used spectrally broadened counterpropagating radiation from tunable diode lasers to cool an atomic beam of cesium. This produces a continuous beam of cold atoms. The injection current to the single-mode diode laser is modulated at 10 MHz, resulting in spectrally broadened light for atomic cooling and optical pumping. The atomic beam is probed with a weak single-mode laser. This is a simple and relatively inexpensive method for producing a continuous supply of cold atoms.

Journal of the Optical Society of America B•Dec 1, 1995•16 citations

Manipulating atomic velocities using diode lasers

Richard N. Watts, Carl Wieman

We have used counterpropagating radiation from a diode laser to cool and stop a beam of cesium atoms. The laser frequency was chirped to keep it in resonance with the slowing atoms. The same laser was used to probe the resulting velocity distributions. We have cooled more than 1010 atoms/sec to a temperature of 1 K. This is an extremely simple and inexpensive way to manipulate atomic velocities and has a wide range of possible applications.

Optics Letters•May 1, 1986•85 citations
A simple control method for the velocity distribution of cesium atoms is demonstrated using a frequency modulated diode laser with a wider spectrum. Current to the diode laser was modulated and the laser spectrum was broadened to overlap the Doppler broadening of the atomic beam. The reduction of the atom velocity was achieved on the basis of the laser cooling technique and a single narrow peak at approximately 45 m/s was observed. From a view point of a novel purification process, the possibility to deflect this cooled cesium atomic beam was discussed to spatially separate the beam from impurities.
We have cooled and stopped a beam of cesium atoms using frequency chirped diode lasers. In this technique, a moving atom absorbs and reemits many photons from a counter propagating laser that is frequency swept to keep it in resonance with an atomic transition. The resulting momentum transfer slows the atom. The basic approach is identical to that developed by Hall and co-workers, however, the use of diode lasers allows us to obtain the necessary frequency modulation simply by sweeping the laser injection current. We use two diode lasers tuned to each of the 6s hyperfine ground state levels to drive the 6s—6p3/2 transitions. Each laser is simultaneously swept over the Doppler profile of the 100°C thermal cesium beam to bring a substantial number to a stop. Using additional fast frequency modulation, the same lasers are used to probe the resulting velocity distribution. This technique allows us to bring ~106 atoms/cm3 to a temperature of 1 K. This method is an extremely simple and inexpensive way to produce cold atoms.
The velocity of a cesium atomic beam was controlled using two broadband frequency-modulated, external-cavity diode lasers. One laser beam was used to decelerate faster atoms and the other was used to accelerate slower atoms. The central velocity of the atoms was readily tuned in a wide range while maintaining the width and peak height of a velocity distribution. In addition, the velocity distribution of cesium atoms was calculated on the basis of the scattering force caused by two frequency-modulated laser beams. The calculated peak ratio was in good agreement with the experimental result.
The results of two experiments involving the rapid frequency modulation of diode lasers are presented. In the first experiment, a cesium beam of 10('14) atoms/sec is produced with more than 98% of the atoms in a single spin state. The beam is polarized by optically pumping it with a single diode laser whose frequency is switched between the 6s(F = 4)-6p(,3/2)(F = 5) and 6s(F = 3)-6p(,3/2)(F = 4) transitions at 100 kHz. To do this, the frequency response of a diode laser to changes in injection current was first determined and the injection current modified to force a jump of 9.2 GHz in 1.5 (mu)sec. The same laser is used to probe the atomic population distribution simultaneously. In the second experiment, two diode lasers, tuned to the 6s(F = 4)-6p(,3/2)(F = 5) and 6s(F = 3)-6p(,3/2)(F = 4) transitions, are used to cool and stop a beam of cesium atoms. The laser frequencies are swept to keep them in resonance with the slowing atoms. The same lasers are used to probe the resulting velocity distribution. More than 10('10) atoms/sec are slowed to a velocity of 0 (+OR-) 15 m/sec, corresponding to a temperature of 1(DEGREES)K. Both of these experiments demonstrate extremely simple and inexpensive ways to manipulate atomic cesium.
The velocity distribution ofcesium atoms decelmated by a laser diode is measwed using a dye lasm with a narrow spectral width. The "stopped atoms" density is four times greatm than that ofthe free atomic beam at maximum of the Doppler distribution. The average quadratic velocity of these stopped atoms is 3 m/s, and is much lower than the width of the velocity class resonant with the lasm diode (25 m/s). The cooling observed is in good agreement with the simple theoretical mode1 presented in this Note. The possibility of using a "three-frequency" diode is also demonstrated.