Similar to the confinement of an electron in a potential well, photons can be spatially confined inside a high index resonator. This confinement can be used to create efficient strong light matter interaction, all optical logic, single photon generation among many other possibilities, provided the resonators possess a small physical volume and low photon decay rate simultaneously. In this thesis, we present two resonator designs, that are 30 times smaller than the wavelength of light in a single direction and exhibit large quality factors. Thereafter, we proceed with three different applications of these resonators.\nFirst application is to slow down the group velocity of light. In the past, many works have been aimed at using a two-resonator model to describe such a system, but fail to provide information about the transmission and group delay. We develop an alternative model that can describe the scattering parameters of such a slow light system with good accuracy. The model also predicts a new phenomenon, namely classical analogue of electromagnetically induced absorption. These predictions are subsequently demonstrated in experiments at GHz and THz frequencies.\nIn the second application, we use these resonators to create media with properties unattainable in nature, more popularly known as metamaterials. We demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant antennas. Finally, we experimentally demonstrate a low loss metamaterial that exhibits negative permittivity or permeability, either separately or simultaneously at GHz and THz frequencies.\nIn the third and final application, we show that the proposed low loss resonators can serve as a route to miniaturization of laser systems. Till date, all approaches encounter a trade-off between the system dimensions and the Q factor, especially when going subwavelength. We propose a laser system that overcomes this trade-off and offers radiation tunability, directionality, subwavelength integration and simple layer-by-layer fabrication.
Similar to the confinement of an electron in a potential well, photons can be spatially confined inside a high index resonator. This confinement can be used to create efficient strong light matter interaction, all optical logic, single photon generation among many other possibilities, provided the resonators possess a small physical volume and low photon decay rate simultaneously. In this thesis, we present two resonator designs, that are 30 times smaller than the wavelength of light in a single direction and exhibit large quality factors. Thereafter, we proceed with three different applications of these resonators.\nFirst application is to slow down the group velocity of light. In the past, many works have been aimed at using a two-resonator model to describe such a system, but fail to provide information about the transmission and group delay. We develop an alternative model that can describe the scattering parameters of such a slow light system with good accuracy. The model also predicts a new phenomenon, namely classical analogue of electromagnetically induced absorption. These predictions are subsequently demonstrated in experiments at GHz and THz frequencies.\nIn the second application, we use these resonators to create media with properties unattainable in nature, more popularly known as metamaterials. We demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant antennas. Finally, we experimentally demonstrate a low loss metamaterial that exhibits negative permittivity or permeability, either separately or simultaneously at GHz and THz frequencies.\nIn the third and final application, we show that the proposed low loss resonators can serve as a route to miniaturization of laser systems. Till date, all approaches encounter a trade-off between the system dimensions and the Q factor, especially when going subwavelength. We propose a laser system that overcomes this trade-off and offers radiation tunability, directionality, subwavelength integration and simple layer-by-layer fabrication.
Metamaterials, or artificial materials with optical properties not known for natural materials, have recently been used to demonstrate unusual optical phenomena, such as negative refraction, perfect lenses, subwavelength components, and electromagnetic invisibility cloaks. Most of the metamaterials designed to date are periodic structures containing a single resonating element in each unit cell, such as a split-ring resonator (SRR), a cutwire, or a slab-wire pair [1]. In this contribution, we demonstrate that a metamaterial with two coupled SRRs can exhibit an effect reminiscent of electromagnetically induced transparency (EIT), a coherent process normally observed in three-level atomic media [2]. Due to this process, a small transparency window with low absorption appears in the spectral response of the metamaterial. Simultaneously, extremely steep normal dispersion is observed in the transparency window, which is useful for slow-light applications.
Recently there has been a considerable interest in metamaterial waveguide structures capable of dramatically slowing down or, even, completely stopping light. Here, we shall explain in some detail the working principle behind the deceleration and/or stopping of light in metamaterial structures, and review the various, metamaterial-enabled, methods that have been proposed thus far towards achieving such a goal. Further, we will concisely describe how one can construct zero-loss metamaterials over a continuous and broad (but not infinite) range of frequencies, which is an essential prerequisite for any slow-light system. Moreover, it will be explained that inside such waveguide structures light can in principle be stopped (zero group velocity, vg = 0) even in the presence of losses. By nature, metamaterialenabled schemes for stopping/storing light invoke solid-state materials and, as such, are not subject to low-temperature or atomic coherence limitations. Furthermore, these methods simultaneously allow for broad bandwidth operation, since they do not rely on group index resonances; large delay-bandwidth products, since a wave packet can, in principle, be completely stopped and buffered indefinitely; and (for the case, in particular, where a negative-index metamaterial is used) high, almost 100%, in/out-coupling efficiencies. Thus, we conclude that these methods for trapping photons, which can be realised using existing technology, could open the way to a multitude of hybrid optoelectronic devices to be used in 'quantum information' processing, communication networks and signal processors and may conceivably herald a new realm of combined metamaterials and slow light research.
Metamaterials, which are materials engineered to possess novel optical properties, have been increasingly studied. The ability to fabricate metamaterials has sparked an interest in determining possible applications. We investigate using a metamaterial for boundary engineering in waveguides. A metamaterial-clad cylindrical waveguide is used to provide confinement for an optical signal, thereby increasing the local electromagnetic energy density. We show that metamaterial-clad waveguides have unique optical properties, including new modes, which we call hybrid modes. These modes have properties of both ordinary guided modes and surface plasmon-polariton modes. We show that for certain metamaterial parameters, the surface plasmon-polariton modes of a metamaterial-clad waveguide have less propagation loss than those of a metal-clad guide with the same permittivity. This low-loss mode is exploited for all-optical control of weak fields. Embedding three-level Λ atoms in the dielectric core of a metamaterial-clad waveguide allows the use of electromagnetically induced transparency to control an optical signal. Adjusting the pump field alters the group velocity of the signal, thereby controllably delaying pulses. Using the low-loss surface mode of a metamaterial-clad guide reduces losses by 20% over a metal cladding without sacrificing the group velocity reduction or confinement. In addition, we show that losses can be reduced by as much as 40% with sufficient reduction of the magnetic damping constant of the metamaterial. As this work aims for applications, practical considerations for fabricating and testing metamaterial-clad waveguides are discussed. An overview of the benefits and drawbacks for two different dielectric core materials is given. Also, a short discussion of other modes that could be used is given.
Recently, strongly modulated photonic crystals, fabricated by the state-of-the-art semiconductor nanofabrication process, have realized various novel optical properties.This paper describes the way in which they differ from other optical media, and clarifies what they can do.In particular, three important issues are considered: light confinement, frequency dispersion and spatial dispersion.First, I describe the latest status and impact of ultra-strong light confinement in a wavelength-cubic volume achieved in photonic crystals.Second, the extreme reduction in the speed of light is reported, which was achieved as a result of frequency dispersion management.Third, strange negative refraction in photonic crystals is introduced, which results from their unique spatial dispersion, and it is clarified how this leads to perfect imaging.The last two sections are devoted to applications of these novel properties.First, I report the fact that strong light confinement and huge light-matter interaction enhancement make strongly modulated photonic crystals promising for on-chip all-optical processing, and present several examples including all-optical switches/memories and optical logics.As a second application, it is shown that the strong light confinement and slow light in strongly modulated photonic crystals enable the adiabatic tuning of light, which leads to various novel ways of controlling light, such as adiabatic frequency conversion, efficient optomechanics systems, photon memories and photons pinning.
New designs "meta-atom" and "meta-material" composed from all-dielectric resonators with high Q and low loss, this kind metamaterial is coupled from propagating plane wave and generates electromagnetic response like electromagnetically induced transparency in atomic vapor. The "meta-atom" or "meta-molecular" are not only workable in room temperature but also enable three dimensional ommidirectionally incident with superposition stacking. Meanwhile, the EIT-like via dielectric metamaterial with high transmittance, dramatic index change and tunable operating frequency. The simulation result agrees the possibility electromagnetically induced transparency -like bulk exists from microwave to THz region.
We review recent theoretical and experimental breakthroughs in the realm of slow and stopped light in structured photonic media featuring negative electromagnetic parameters (permittivity/permeability and/or refractive index). We explain how and why these structures can enable complete stopping of light even in the presence of disorder and, simultaneously, dissipative losses. Using full-wave numerical simulations we show that the incorporation of thin layers made of an active medium adjacently to the core layer of a negative-refractive-index waveguide can completely remove dissipative losses – in a slow-light regime where the effective index of the guided wave is negative.