Abstract Quantum repeaters are required for realizing long-distance quantum communication. The quantum repeater consists of a quantum memory to store quantum information and an interface between photonic flying qubits and the memory qubits. Electron spins in gate-defined quantum dots (QDs), which have a relatively long coherence time and high electrical tunability, are promising candidates for such memory qubits because the fundamental technologies of detecting and manipulating single photoelectron spins have been established. The remaining challenge for the realization of quantum repeaters is an efficient coupling between photons and electron spins in the QDs. In this study, we discuss the enhancement of the transmission and the maintenance of the incident light polarization through bull’s eye structures on gate-defined QDs on the basis of electromagnetic field simulations.
Abstract Quantum repeaters are required for realizing long-distance quantum communication. The quantum repeater consists of a quantum memory to store quantum information and an interface between photonic flying qubits and the memory qubits. Electron spins in gate-defined quantum dots (QDs), which have a relatively long coherence time and high electrical tunability, are promising candidates for such memory qubits because the fundamental technologies of detecting and manipulating single photoelectron spins have been established. The remaining challenge for the realization of quantum repeaters is an efficient coupling between photons and electron spins in the QDs. In this study, we discuss the enhancement of the transmission and the maintenance of the incident light polarization through bull’s eye structures on gate-defined QDs on the basis of electromagnetic field simulations.
Abstract The realization of a functional quantum repeater is one of the major research goals in long-distance quantum communication. Among the different approaches that are being followed, the one relying on quantum memories interfaced with deterministic quantum emitters is considered as one of the most promising solutions. In this work, we focus on the hardware to implement memory-based quantum-repeater schemes that rely on semiconductor quantum dots (QDs) for the generation of polarization entangled photons. Going through the most relevant figures of merit related to efficiency of the photon source, we select significant developments in fabrication, processing and tuning techniques aimed at combining high degree of entanglement with on-demand pair generation, with a special focus on the progress achieved in the representative case of the GaAs system. We proceed to offer a perspective on integration with quantum memories, both highlighting preliminary works on natural–artificial atomic interfaces and commenting a wide choice of currently available and potentially viable memory solutions in terms of wavelength, bandwidth and noise-requirements. To complete the overview, we also present recent implementations of entanglement-based quantum communication protocols with QDs and highlight the next challenges ahead for the implementation of practical quantum networks.
A fascinating dream in quantum information science is to build quantum computers with super-performance and quantum networks with unconditional security [1]. Quantum networks utilize static (matter) quantum bits (qubits) to store and process quantum information at local nodes, and photons as flying qubits for long-distance quantum state transmission between different nodes. To realize a quantum network, it is crucial to achieve light-matter entanglement and reversible quantum-state transfer between light and matter, i.e., the light-matter quantum interface, and the quantum repeater for large-scale quantum communications [2]. Recent experiments have shown that both electrons and holes confined in semiconductor quantum dots (QDs) have long spin relaxation time (T1e, T1h ~ ms) and long spin coherence time (T2e ~ microseconds, T2h > 100 ns). Moreover, fast spin cooling and ultra-fast spin manipulation as well as spin echoes to preserve the spin coherence have also been demonstrated. Undoubtedly these rapid progresses imply that the QD spin is a good candidate for matter qubit in quantum information processing. Furthermore, QD-based single photon sources have been also developed. Therefore, semiconductor QDs offer a good platform for solid-state quantum networking and quantum computation. Here we present two types of conditional quantum gates, i.e., the photon-spin entangling gates [3-4] using a single QD spin in a single-sided or double-sided optical microcavity. Both gates are universal and deterministic (if they are optimized). The spin-selective coherent photon-spin interaction enhanced by the cavity QED lead to giant circular birefringence, which allows us to build these gates. We will show the versatile spin-cavity systems can be applied in all aspects of quantum information science and technology, not only for large-scale quantum communication networks (solid-state quantum repeaters) [5], but also for scalable quantum computing with either photons or spins as qubits. We will also discuss other applications using these gates, such as photon-number resolving detection, quantum feed-back control, loss-resistant quantum metrology, and loophole-free Bell test [6], and other devices based on optical nonlinearity at single-photon levels in these gate structures. All these schemes are feasible with current semiconductor technology [7], and we have recently seen conditional phase shifts in uncharged QD-cavity systems [8]. References [1] H.J. Kimble, Nature (London) 453, 1023 (2008). [2] H.-J. Briegel et al., Phys. Rev. Lett. 81, 5932 (1998). [3] C.Y. Hu et al., Phys. Rev. B 78, 085307 (2008); ibid. 78, 125318 (2008). [4] C.Y. Hu et al., Phys. Rev. B 80, 205326 (2009). [5] C.Y. Hu and J.G. Rarity, Phys. Rev. B 83, 115303 (2011). [6] N. Brunner et al., Arxiv: quant-phys 1303.6522 (2013). [7] S. Reitzenstein et al., Appl. Phys. Lett. 90, 251109 (2007). [8] A.B. Young et al., Phys. Rev. A 84, 011803 (2011).
New technologies based on the properties of quantum mechanics promise to revolutionise the way information is processed by outperforming what is possible using classical devices. Examples include massively parallel processing using quantum computers, verifiably secure communication using quantum cryptography, and measurement with sensitivity beyond classical limitation with quantum metrology. Realising the full potential of these technologies necessitates the ability to communicate quantum information over large distances, a key requirement for future quantum networks. However, developing practical implementations of long-distance quantum communication is challenging as it necessitates three major ingredients: light-matter interfaces, elementary quantum operations, and quantum memories. This thesis describes work that has been undertaken to address these requirements using semiconductor nanotechnology. We have first demonstrated that single InAs quantum dots embedded inside conventional diode structures constitute high-fidelity controllable interfaces between optical qubits and solid-state qubits. Indeed, the polarisation state of a photon was transferred into the spin state of an electron-hole pair and eventually restored through radiative recombination of the electron and the hole with a fidelity up to 95%. Moreover, spins were manipulated using subnanosecond modulation of a vertical electric field applied to the quantum dots. By controlling this electrical modulation, we demonstrated elementary phase-shift and spin-flip gate operations with near-unity fidelities. An electron-hole pair confi ned in a single quantum dot has a short radiative lifetime limiting therefore its use as an excitonic quantum memory. The solution we proposed was to use a quantum dot molecule to control the spatial separation of the electron and the hole and therefore prevent their recombination. Comprehensive studies of electric field eff ects upon the photoluminescence of quantum dot molecules lead to a clear understanding and a good control over their physical properties. Single photons were stored in individual quantum dot molecules up to 1μs and read out on a subnanosecond time scale. Moreover, the circular polarisation of individual photons was transferred into the spin state of electron-hole pairs with a fidelity above 90%, which does not degrade for storage times up to the 12.5 ns repetition period of the experiment. Our work on single quantum dots could be extended in the near future to allow for two-qubits quantum operations by con fining a second electron-hole pair to be electrically manipulated. Storage of a superposition of spin states in a quantum dot molecule should also be possible if the spin states are made degenerate, which is feasible using the electric fi eld dependence of the energy splitting between the spin states discussed in this thesis. We believe that combining both approaches will lead to the development of a controllable multi-qubit quantum memory for polarised light, a building block for long distance quantum communication based on semiconductor nanotechnology.
Long-distance quantum communication requires transmitting, buffering, and processing quantum information via nodes called quantum repeaters. Unfortunately, current technology is suited for either communication or storage, but not both simultaneously. To address this challenge, the authors propose an all-semiconductor hybrid quantum device that capacitively couples an optically active quantum-dot molecule to a gated-dot array. This optoelectronic device, which could be orders of magnitude faster than today's repeaters, emits a photon whose polarization is entangled with the electron spins in the array.
Recently, a quantum media converter from a photon qubit to an electron spin qubit was proposed for quantum repeaters. Quantum information can take several different forms and it is preferable to be able to convert among different forms. One form is the photon polarization and another is the electron spin polarization. Photons are the most convenient medium for sharing quantum information between distant locations. However, it is necessary to realize a quantum repeater in order to send the information securely over a very long distance overcoming the photon loss. A quantum repeater requires quantum information storage and the electron spin is a promising candidate of such a quantum memory because of its long decoherence time. The most important ingredient of the quantum repeater is the entanglement swapping through the Bell (correlation) measurement. We propose an optical means to carry out the correlation measurement. The advantage of this method is the nondestructive character which keeps the quantum state unchanged.
The realization of a functional quantum repeater is one of the major research goals in long-distance quantum communication. Among the different approaches that are being followed, the one relying on quantum memories interfaced with deterministic quantum emitters is considered as among one of the most promising solutions. In this work, we focus on memory-based quantum-repeater schemes that rely on semiconductor quantum dots for the generation of polarization entangled photons. Going through the most relevant figures of merit related to efficiency of the photon source, we select significant developments in fabrication, processing and tuning techniques aimed at combining high degree of entanglement with on-demand pair generation, with a special focus on the progress achieved in the representative case of the GaAs system. We proceed to offer a perspective on integration with quantum memories, both highlighting preliminary works on natural-artificial atomic interfaces and commenting a wide choice of currently available and potentially viable memory solutions in terms of wavelength, bandwidth and noise-requirements. To complete the overview, we also present recent implementations of entanglement-based quantum communication protocols with quantum dots and highlight the next challenges ahead for the implementation of practical quantum networks.