M. Lezius, Tobias Wilken, Christian Deutsch, Michele Giunta, Olaf Mandel, A. Thaller, Vladimir Schkolnik, Max Schiemangk, Aline N. Dinkelaker, Anja Kohfeldt, Andreas Wicht, Markus Krutzik, Achim Peters, Ortwin Hellmig, Hannes Duncker, K. Sengstock, Patrick Windpassinger, Kai Lampmann, Thomas Hülsing, Theodor W. Hänsch, Ronald Holzwarth
Precision time references in space are of major importance to satellite-based fundamental science, global satellite navigation, earth observation, and satellite formation flying. Here we report on the operation of a compact, rugged, and automated optical frequency comb setup on a sounding rocket in space under microgravity. The experiment compared two clocks, one based on the optical D2 transition in Rb, and another on hyperfine splitting in Cs. This represents the first frequency comb based optical clock operation in space, which is an important milestone for future satellite-based precision metrology. Based on the approach demonstrated here, future space-based precision metrology can be improved by orders of magnitude when referencing to state-of-the-art optical clock transitions.
Precision time references in space are of major importance to satellite-based fundamental science, global satellite navigation, earth observation, and satellite formation flying. Here we report on the operation of a compact, rugged, and automated optical frequency comb setup on a sounding rocket in space under microgravity. The experiment compared two clocks, one based on the optical D2 transition in Rb, and another on hyperfine splitting in Cs. This represents the first frequency comb based optical clock operation in space, which is an important milestone for future satellite-based precision metrology. Based on the approach demonstrated here, future space-based precision metrology can be improved by orders of magnitude when referencing to state-of-the-art optical clock transitions.
The next generation of space-based networks for communications, sensing, and navigation will contain optical clocks embedded within satellites. To fully realize the capabilities of such clocks, high-precision clock synchronization across the networks will be necessary. Current experiments have shown the potential for classical frequency combs to synchronize remote optical clocks over free space. However, these classical combs are restricted in precision to the standard quantum limit. Quantum frequency combs, however, which exhibit quantum properties such as squeezing and entanglement, provide pathways for going beyond the standard quantum limit. Here, we present our perspective on the prospects for practical clock synchronization in space using both classical and quantum frequency combs. We detail the current outcomes achievable with a classical frequency comb approach to synchronization, before quantifying the potential outcomes offered by quantum frequency combs. Challenges to be overcome in deploying frequency combs in space are presented, and the implications of almost-perfect synchronization for future space-based applications and experiments are discussed.
Space-borne optical frequency references based on spectroscopy of atomic vapors may serve as an integral part of compact optical atomic clocks, which can advance global navigation systems or can be utilized for earth observation missions as part of laser systems for cold atom gradiometers. Nanosatellites offer low launch costs, multiple deployment opportunities, and short payload development cycles, enabling rapid maturation of optical frequency references and underlying key technologies in space. Toward an in-orbit demonstration on such a platform, we have developed a CubeSat-compatible prototype of an optical frequency reference based on the D2 transition in rubidium. A frequency instability of 1.7 × 10 − 12 at 1 s averaging time is achieved. The optical module occupies a volume of 35 c m 3 , weighs 73 g, and consumes 780 mW of power.
Abstract Optical clock networks play important roles in various fields, such as precise navigation, redefinition of “second” unit, and gravitational tests. To establish a global-scale optical clock network, it is essential to disseminate time and frequency with a stability of 10^−19 over a long-distance free-space link. However, such attempts were limited to dozens of kilometers in mirror-folded configuration. Here, we take a crucial step toward future satellite-based time-frequency disseminations. By developing the key technologies, including high-power frequency combs, high-stability and high-efficiency optical transceiver systems, and efficient linear optical sampling, we demonstrate free-space time-frequency dissemination over two independent links with femtosecond time deviation, 3 × 10−19 at 10,000 s residual instability and 1.6 × 10^−20 ± 4.3 × 10^−19 offset. This level of the stability retains for an increased channel loss up to 89 dB. Our work can not only be directly used in ground-based application, but also firmly laid the groundwork for future satellite time-frequency dissemination.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
The use of ultra-precise optical clocks in space (“master clocks”) will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the “Space Optical Clocks” (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011–2015) aims at two “engineering confidence“, accurate transportable lattice optical clock demonstrators having relative frequency instability below 1×10−15at 1 s integration time and relative inaccuracy below 5×10−17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In order to achieve the goals, SOC2 will develop the necessary laser systems - adapted in terms of power, linewidth, frequency stability, long-term reliability, and accuracy. Novel solutions with reduced space, power and mass requirements will be implemented. Some of the laser systems will be developed towards particularly high compactness and robustness levels. Also, the project will validate crucial laser components in relevant environments. In this paper we present the project and the results achieved during the first year.
High-precision optical frequency transfer through free-space links will enable advances in fields ranging from coherent optical communication and satellite Doppler ranging, to tests of general relativity and fundamental physics. Previous work has focused on two-way time and frequency transfer techniques using optical frequency combs. Here the authors show that a continuous-wave coherent link can exceed the fractional frequency stability of frequency-comb methods by an order of magnitude. They also highlight and discuss the technical hurdles to implementing similar links over the distances required to reach low Earth orbit.