Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Mode-matching and fringe locking technique in preparation of squeezed states of light

Wenyan Qu, Fei Feng, Jiazheng Song, Tongyi Zhang

Published Sep 25, 2015• 0 citations
OpenAlex

Abstract

Optical parametric oscillation is the critical part in the preparation of squeezed states of light. The mode-matching and fringe locking technique should be employed to improve the stability of the optical parametric oscillator cavity. How the mode-matching efficiency influence the squeezing degree of the squeezed light and the locking accuracy of the fringe locking technique were analyzed theoretically. Then the fringe locking technique was employed to stabilize the optical parametric oscillator cavity after the mode-matching between the laser mode and the fundamental mode of the cavity. The theoretical and experimental results show that a perfect mode-matching would improve the squeezing degree and the locking accuracy of the fringe locking technique, when the mode-matching is optimized, the length variance of the cavity is 7.35 nm and the locking time is no less than 2 h, which is sufficient for the detection of the squeezed states of light. ©, 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

Related papers

Stabilizing the Optical Parametric Oscillator Cavity by Fringe-locking Technique in Preparation of Squeezed State of Light

QU Wen-ya

A fringe-locking technique was employed to stabilize the optical parametric oscillator cavity,which would be affected by external environmental disturbance,such as vibration and airflow.First,how the locking point influence the squeezing degree was analyzed theoretically,the results show that position at half of the transmission peak could be the best locking point.Then the fringe-locking technique was applied to achieve the resonance between the optical parametric oscillator cavity and the injected infrared light experimentally.The experimental results show that the length variance of the cavity in continuous operation over 2his 7.27 nm and the longest locking time is 3.8h,which is sufficient for the detection of the squeezed states of light.

ACTA PHOTONICA SINICA•Jan 1, 2014•0 citations

Experimental study on mode matching for preparation of squeezed light at 1064 nm

Fei Feng, Tongyi Zhang, Wenyan Qu +1 more

The effect of mode matching on the preparation of the squeezed light at 1064 nm with periodically poled KTiOPO 4 (PPKTP) crystal is reported. We can derive the desired mode by improving the spatial mode matching into optical cavities, including the beam from the laser mode matched to the optical parametric amplifier cavity and mode cleaning cavity; also it is useful for the stability of the locking systems. By increasing the fringe visibility between the squeezed light and the local oscillator beam, a squeezing level of −8.75 dB or even higher could be observed, even with the same experimental parameters as described elsewhere.

Optical Engineering•Aug 1, 2013•4 citations

Stabilizing the Optical Parametric Oscillator Cavity by Fringe-locking Technique in Preparation of Squeezed State of Light

曲文艳 QU Wen-yan, 宋家争 Song Jia-zheng, 冯飞 FENG Fei +2 more

ACTA PHOTONICA SINICA•Jan 1, 2014•1 citation

Effects of cavity detuning on squeezing in the generation of squeezed light at 1064 nm

Fei Feng, Jiazheng Song, Wenyan Qu +1 more

We investigate the effects of cavity detuning on squeezing in the generation of the squeezed light at 1064 nm with a degenerate optical parametric amplifier (OPA) based on a periodically poled KTiOPO4 crystal. We theoretically analyze several effects that lead to cavity detuning, including the displacement and tilt of the incident laser light and the cavity length fluctuations of the OPA. To reduce the influence of the cavity detuning and increase the degree of generated quantum noise reduction, a side-of-fringe locking technique is applied to achieve the resonance between the OPA cavity and the injected laser beam. The experimental results show that the transmitted power through the locked cavity is increased and the cavity detuning is greatly suppressed. After locking of the cavity, we could expect to get a value for the control loop with an accuracy of 10−9 and the locking time is not less than 2 h, which paves the way for the preparation of the squeezed light.

Optical Engineering•Aug 15, 2014•0 citations

Theoretical and experimental study on methods for increasing squeezed level in the generation of squeezed light

Fei Feng, Wenyan Qu, Jiazheng Song +1 more

We demonstrate the methods for increasing the observed squeezing level in the generation of squeezed states of light at 1064 nm with periodically poled KTiOPO4 (PPKTP) crystal. We analyze the technical limits to the reduction of noise in the squeezed quadrature theoretically, including the intra-cavity loss of the optical parametric amplifier (OPA) cavity, the normalized amplitude, the detection frequency, and the mode matching on the balanced homodyning stage. To observe a high degree of squeezing, we improve the quality of mode matching into the OPA cavity and the mode cleaning (MC) cavity experimentally. By optimizing mode matching of the light into cavities, the finesse of the cavities would be higher in practice and the desirable spatial mode can be realized. As the intensity noise of the laser light reach the shot noise limit above the frequency of 1 MHz, which is sufficient for our experiment, so the MC cavity is incorporated to filter higher-order transverse modes of the local oscillator (LO) beam for the balanced homodyne detection. The experimental and theoretical results show that it is essential to optimize the mode matching efficiency to generate and detect high degree of squeezing otherwise an inefficiency mode matching will throw away the squeezing and transform the squeezed field into a vacuum field.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 21, 2013•0 citations

Generation of squeezed light with a monolithic optical parametric oscillator: Simultaneous achievement of phase matching and cavity resonance by temperature control

Hidehiro Yonezawa, Koyo Nagashima, Akira Furusawa

We generate squeezed state of light at 860 nm with a monolithic optical parametric oscillator. The optical parametric oscillator consists of a periodically poled KTiOPO(4) crystal, both ends of which are spherically polished and mirror-coated. We achieve both phase matching and cavity resonance by controlling only the temperature of the crystal. We observe up to -8.0±0.2 dB of squeezing with the bandwidth of 142 MHz. Our technique makes it possible to drive many monolithic cavities simultaneously by a single laser. Hence our monolithic optical parametric oscillator is quite suitable to continuous-variable quantum information experiments where we need a large number of highly squeezed light beams.

arXiv:1007.2995•Optics Express•Sep 7, 2010•27 citations
Optical parametric oscillation is the critical part in the preparation of squeezed states of light. The mode-matching and fringe locking technique should be employed to improve the stability of the optical parametric oscillator cavity. How the mode-matching efficiency influence the squeezing degree of the squeezed light and the locking accuracy of the fringe locking technique were analyzed theoretically. Then the fringe locking technique was employed to stabilize the optical parametric oscillator cavity after the mode-matching between the laser mode and the fundamental mode of the cavity. The theoretical and experimental results show that a perfect mode-matching would improve the squeezing degree and the locking accuracy of the fringe locking technique, when the mode-matching is optimized, the length variance of the cavity is 7.35 nm and the locking time is no less than 2 h, which is sufficient for the detection of the squeezed states of light. ©, 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
A fringe-locking technique was employed to stabilize the optical parametric oscillator cavity,which would be affected by external environmental disturbance,such as vibration and airflow.First,how the locking point influence the squeezing degree was analyzed theoretically,the results show that position at half of the transmission peak could be the best locking point.Then the fringe-locking technique was applied to achieve the resonance between the optical parametric oscillator cavity and the injected infrared light experimentally.The experimental results show that the length variance of the cavity in continuous operation over 2his 7.27 nm and the longest locking time is 3.8h,which is sufficient for the detection of the squeezed states of light.
The effect of mode matching on the preparation of the squeezed light at 1064 nm with periodically poled KTiOPO 4 (PPKTP) crystal is reported. We can derive the desired mode by improving the spatial mode matching into optical cavities, including the beam from the laser mode matched to the optical parametric amplifier cavity and mode cleaning cavity; also it is useful for the stability of the locking systems. By increasing the fringe visibility between the squeezed light and the local oscillator beam, a squeezing level of −8.75 dB or even higher could be observed, even with the same experimental parameters as described elsewhere.
We investigate the effects of cavity detuning on squeezing in the generation of the squeezed light at 1064 nm with a degenerate optical parametric amplifier (OPA) based on a periodically poled KTiOPO4 crystal. We theoretically analyze several effects that lead to cavity detuning, including the displacement and tilt of the incident laser light and the cavity length fluctuations of the OPA. To reduce the influence of the cavity detuning and increase the degree of generated quantum noise reduction, a side-of-fringe locking technique is applied to achieve the resonance between the OPA cavity and the injected laser beam. The experimental results show that the transmitted power through the locked cavity is increased and the cavity detuning is greatly suppressed. After locking of the cavity, we could expect to get a value for the control loop with an accuracy of 10−9 and the locking time is not less than 2 h, which paves the way for the preparation of the squeezed light.
We demonstrate the methods for increasing the observed squeezing level in the generation of squeezed states of light at 1064 nm with periodically poled KTiOPO4 (PPKTP) crystal. We analyze the technical limits to the reduction of noise in the squeezed quadrature theoretically, including the intra-cavity loss of the optical parametric amplifier (OPA) cavity, the normalized amplitude, the detection frequency, and the mode matching on the balanced homodyning stage. To observe a high degree of squeezing, we improve the quality of mode matching into the OPA cavity and the mode cleaning (MC) cavity experimentally. By optimizing mode matching of the light into cavities, the finesse of the cavities would be higher in practice and the desirable spatial mode can be realized. As the intensity noise of the laser light reach the shot noise limit above the frequency of 1 MHz, which is sufficient for our experiment, so the MC cavity is incorporated to filter higher-order transverse modes of the local oscillator (LO) beam for the balanced homodyne detection. The experimental and theoretical results show that it is essential to optimize the mode matching efficiency to generate and detect high degree of squeezing otherwise an inefficiency mode matching will throw away the squeezing and transform the squeezed field into a vacuum field.
We generate squeezed state of light at 860 nm with a monolithic optical parametric oscillator. The optical parametric oscillator consists of a periodically poled KTiOPO(4) crystal, both ends of which are spherically polished and mirror-coated. We achieve both phase matching and cavity resonance by controlling only the temperature of the crystal. We observe up to -8.0±0.2 dB of squeezing with the bandwidth of 142 MHz. Our technique makes it possible to drive many monolithic cavities simultaneously by a single laser. Hence our monolithic optical parametric oscillator is quite suitable to continuous-variable quantum information experiments where we need a large number of highly squeezed light beams.