A fundamental peculiarity of gravitational waves is the fact that they couple very weakly to the matter. For this reason the response of a detector can be so small to be comparable with quantum undeterminations. An important limitation for the sensitivity of future generation interferometric detectors of gravitational waves is the so-called standard quantum limit, which makes impossible to do repeated, arbitrary precision measurements of the relevant observables. It can be explained as the consequence of the measurement process' back action on the detector's dynamics. A relevant theoretical and experimental effort has been done in these years in order to study the possibility of avoiding this limitation, which is no more considered a fundamental one. In this talk after a short introduction to the SQL problem from a general point of view I discuss some proposals for detection strategies designed to evade it.
A fundamental peculiarity of gravitational waves is the fact that they couple very weakly to the matter. For this reason the response of a detector can be so small to be comparable with quantum undeterminations. An important limitation for the sensitivity of future generation interferometric detectors of gravitational waves is the so-called standard quantum limit, which makes impossible to do repeated, arbitrary precision measurements of the relevant observables. It can be explained as the consequence of the measurement process' back action on the detector's dynamics. A relevant theoretical and experimental effort has been done in these years in order to study the possibility of avoiding this limitation, which is no more considered a fundamental one. In this talk after a short introduction to the SQL problem from a general point of view I discuss some proposals for detection strategies designed to evade it.
Interferometric gravitational wave detectors (such as advanced LIGO) employ high-power solid-state lasers to maximize their detection sensitivity and hence their reach into the universe. These sophisticated light sources are ultra-stabilized with regard to output power, emission frequency and beam geometry; this is crucial to obtain low detector noise. However, even when all laser noise is reduced as far as technically possible, unavoidable quantum noise of the laser still remains. This is a consequence of the Heisenberg Uncertainty Principle, the basis of quantum mechanics: in this case, it is fundamentally impossible to simultaneously reduce both the phase noise and the amplitude noise of a laser to arbitrarily low levels. This fact manifests in the detector noise budget as two distinct noise sources—photon shot noise and quantum radiation pressure noise—which together form a lower boundary for current-day gravitational wave detector sensitivities, the standard quantum limit of interferometry. To overcome this limit, various techniques are being proposed, among them different uses of non-classical light and alternative interferometer topologies. This article explains how quantum noise enters and manifests in an interferometric gravitational wave detector, and gives an overview of some of the schemes proposed to overcome this seemingly fundamental limitation, all aimed at the goal of higher gravitational wave event detection rates. This article is part of a discussion meeting issue ‘The promises of gravitational-wave astronomy’.
In recent years advances in technology, especially in the field of quantum optics, have made possible repetitive quantum measurements on a single quantum object, an issue that remained an academic curiosity until 25 years ago. This book, first published in 1992, provides a tutorial introduction to this field. The book is coauthored by an experimentalist and a theorist: the former - Braginsky - was the first experimentalist after Weber to develop techniques for gravitational-wave detection; the latter - Khalili - contributed with Braginsky to develop the formal apparatus to describe the experimental devices for measurement schemes. After the first part, intended as a pedagogical appendix of a standard textbook, and devoted to the modern approach to quantum measurement, the second part is a review of some new methods of quantum measurements for macroscopic objects. The central problem is the detection of a small time-dependent classical force that acts on a quantum probe. This is the typical situation that occurs in gravitational-wave detection, where the probe is a macroscopic moving mass weakly coupled to a classical wave. The problem of gravitational-wave detection and the limitation to accuracy of measurement of position of a moving mass - the so-called standard quantum limit (SQL), which is a consequence of the random back-action of the measuring device on the mass - triggered the development of new quantum nondemolition (QND) measurements, i.e. measurements where the measured quantity is left unperturbed after the measurement. SQL and QND measurements (both Braginsky inventions) permeate the whole book as a transversal chapter. The aim is to give simple criteria and recipes to design a measuring device in order to optimize the accuracy of the measurement, and, at the same time, to minimize the perturbation that the device exerts on the measured object, so that it will not interfere with successive measurements on the same object. The continuous measurements are regarded as the limiting case of a sequence of repeated discrete measurements, when the interval between the measurements is much smaller than the characteristic time-scale on which the measured quantity changes. The analysis of continuous measurements give to the authors the opportunity to illustrate the watchdog effect and the quantum Zeno paradox (real effect), while deriving the master equation for the evolution of the object state. Then, an entire chapter is devoted to the analysis of devices for continuous measurement of small mechanical displacements. The book is easy to understand, and can serve as a complementary reading for graduate level courses in quantum mechanics. The material of the book can be useful for all scientists and engineers involved in researches related to high-sensitive quantum measurements, quantum information theory and quantum computation. The reader, however, should be aware that this book presents a very particular point of view, with no room left to very relevant concepts in quantum measurement theory, as, for example, squeezing, quantum amplification, joint-measurements of non-commuting observables and phase-measurements. More regrettably, the list of references is unsatisfactorily incomplete, with no mention of alternative developments, for example, regarding the SQL for measuring the position of a free mass. Here, schemes to breach the SQL have been proposed in the literature (Yuen H P 1983 Phys. Rev. Lett. 51 719, Ozawa M 1988 Phys. Rev. Lett. 60 385), whereas from the book one could conclude that such SQL would be unsurpassable. Also, a criticism is in order of the way of deriving some SQL's, based solely on the Heisenberg relation, even in consideration that the aim of such derivations is mostly pedagogical.
The fast progress in improving the sensitivity of the gravitational-wave detectors, we all have witnessed in the recent years, has propelled the scientific community to the point at which quantum behavior of such immense measurement devices as kilometer-long interferometers starts to matter. The time when their sensitivity will be mainly limited by the quantum noise of light is around the corner, and finding ways to reduce it will become a necessity. Therefore, the primary goal we pursued in this review was to familiarize a broad spectrum of readers with the theory of quantum measurements in the very form it finds application in the area of gravitational-wave detection. We focus on how quantum noise arises in gravitational-wave interferometers and what limitations it imposes on the achievable sensitivity. We start from the very basic concepts and gradually advance to the general linear quantum measurement theory and its application to the calculation of quantum noise in the contemporary and planned interferometric detectors of gravitational radiation of the first and second generation. Special attention is paid to the concept of the Standard Quantum Limit and the methods of its surmounting.
The fast progress in improving the sensitivity of the gravitational-wave detectors, we all have witnessed in the recent years, has propelled the scientific community to the point at which quantum behavior of such immense measurement devices as kilometer-long interferometers starts to matter. The time when their sensitivity will be mainly limited by the quantum noise of light is around the corner, and finding ways to reduce it will become a necessity. Therefore, the primary goal we pursued in this review was to familiarize a broad spectrum of readers with the theory of quantum measurements in the very form it finds application in the area of gravitational-wave detection. We focus on how quantum noise arises in gravitational-wave interferometers and what limitations it imposes on the achievable sensitivity. We start from the very basic concepts and gradually advance to the general linear quantum measurement theory and its application to the calculation of quantum noise in the contemporary and planned interferometric detectors of gravitational radiation of the first and second generation. Special attention is paid to the concept of the Standard Quantum Limit and the methods of its surmounting. 1 ar
Quantum fluctuation of light limits the sensitivity of advanced laser interferometric gravitational-wave detectors. It is one of the principal obstacles on the way towards the next-generation gravitational-wave observatories. The envisioned significant improvement of the detector sensitivity requires using quantum non-demolition measurement and back-action evasion techniques, which allow us to circumvent the sensitivity limit imposed by the Heisenberg uncertainty principle. In our previous review article (Danilishin and Khalili in Living Rev Relativ 15:5, 2012 ), we laid down the basic principles of quantum measurement theory and provided the framework for analysing the quantum noise of interferometers. The scope of this paper is to review novel techniques for quantum noise suppression proposed in the recent years and put them in the same framework. Our delineation of interferometry schemes and topologies is intended as an aid in the process of selecting the design for the next-generation gravitational-wave observatories.
Current gravitational wave (GW) detectors have “standard quantum limit ” (SQL) due to the uncertainty in quantum mechanics and GW detectors in near future needs to beat this SQL. So, quantum non-demolition measurements are researched in the GW research community and some techniques have been proposed to beat SQL. On the other hand, in quantum information, “quantum measurement theory ” is developing and its experiments are carried out. Unfortunately, this development has been almost independent of GW researches. For this reason, we have been exploring applicabilities of techniques in quantum information to GW detectors. We focused on the “weak measurement ” (WM) pro-posed by Aharonov et al. [1] in 1988. Many experiments