In this dissertation we study the development of microwave and RF near-field potentials for use with atom chip trapped atomic gases. These potentials are inherently spin-dependent, able to target individual spin states simultaneously. In contrast with traditional atom chip potentials, these RF traps can be operated at arbitrary bias magnetic field strengths and thus be combined with magnetic Feshbach resonances. Furthermore, these potentials can strongly suppress the potential roughness that plagues traditional atom chip potentials. We present a dual chamber atom chip apparatus for generating ultracold 87Rb and 39K atomic gases. The apparatus produces quasi-pure Bose-Einstein condensates of 104 87Rb atoms in an atom chip trap that features a dimple and good optical access. We have also demonstrated production of ultracold 39K and subsequent loading into the chip trap. We describe the details of the dual chamber vacuum system, the cooling lasers, the magnetic trap, the multi coil magnetic transport system, and the atom chip. The apparatus is well suited for studies of atom-surface forces, quantum pumping and transport experiments, atom interferometry, novel chip-based traps, and studies of one-dimensional many-body systems.
In this dissertation we study the development of microwave and RF near-field potentials for use with atom chip trapped atomic gases. These potentials are inherently spin-dependent, able to target individual spin states simultaneously. In contrast with traditional atom chip potentials, these RF traps can be operated at arbitrary bias magnetic field strengths and thus be combined with magnetic Feshbach resonances. Furthermore, these potentials can strongly suppress the potential roughness that plagues traditional atom chip potentials. We present a dual chamber atom chip apparatus for generating ultracold 87Rb and 39K atomic gases. The apparatus produces quasi-pure Bose-Einstein condensates of 104 87Rb atoms in an atom chip trap that features a dimple and good optical access. We have also demonstrated production of ultracold 39K and subsequent loading into the chip trap. We describe the details of the dual chamber vacuum system, the cooling lasers, the magnetic trap, the multi coil magnetic transport system, and the atom chip. The apparatus is well suited for studies of atom-surface forces, quantum pumping and transport experiments, atom interferometry, novel chip-based traps, and studies of one-dimensional many-body systems.
We present a dual chamber atom chip apparatus for generating ultracold (87)Rb and (39)K atomic gases. The apparatus produces quasi-pure Bose-Einstein condensates of 10(4) (87)Rb atoms in an atom chip trap that features a dimple and good optical access. We have also demonstrated production of ultracold (39)K and subsequent loading into the chip trap. We describe the details of the dual chamber vacuum system, the cooling lasers, the magnetic trap, the multicoil magnetic transport system, the atom chip, and two optical dipole traps. Due in part to the use of light-induced atom desorption, the laser cooling chamber features a sufficiently good vacuum to also support optical dipole trap-based experiments. The apparatus is well suited for studies of atom-surface forces, quantum pumping and transport experiments, atom interferometry, novel chip-based traps, and studies of one-dimensional many-body systems.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
Spin-specific trapping and mechanical control of ultracold atoms is difficult with current techniques, but offers the possibility of exploring new physics systems, such as spin-dependent trapped atom interferometers, as well as quantum gates, 1D many-body spin gases, and novel cooling schemes. Microwave near-field potentials based on the AC Zeeman effect provide a mechanism for such spin-specific control of atoms: in principle, independent potentials can be targeted to different spin states simultaneously. A broadband microwave atom chip can be used to generate both AC Zeeman trapping potentials and a microwave lattice for long distance trap positioning. We present recent experimental results on the successful trapping of ultracold rubidium atoms in an AC Zeeman atom chip trap using RF intra-hyperfine manifold transitions. Notably, these traps suppress the potential roughness encountered in traditional micro-magnetic chip traps.
We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.
This thesis describes a new apparatus designed to study ultracold gases of rubidium. The apparatus comprises a six-beam MOT chamber and a dierential pumping stage leading into a 'science chamber'. This science chamber is constructed from a rectangular glass cell. Atomic gases of rubidium are collected in a MOT and then transferred into a magnetic quadrupole trap. This quadrupole trap is mounted on a motorised translation stage. This setup transports the atoms into the science chamber, where they are transferred into a static quadrupole trap which is built around the glass cell. During the transport the atoms are deected over a glass prism, which shields the science chamber from stray rubidium from the MOT chamber. The magnetic transport is studied in detail and the deection over the glass prism is fully described simulating the displacement of the quadrupole trap. Using the magnetic quadrupole trap in the science chamber to store one rubidium isotope, we are able to load the other rubidium isotope in the MOT chamber and transfer it also into the science chamber. There, the two magnetic traps are merged and variable ratios of isotopic mixtures can be created. The merging of the two quadrupole traps could be employed in future experiments to cool 85Rb sympathetically with 87Rb. In the science chamber forced radio-frequency evaporation is performed and the loading of a far-detuned dipole trap is studied. Initially the dipole trap is realised as a hybrid trap, a single beam dipole trap in combination with the quadrupole trap. Further studies include the loading of a crossed beam dipole trap. We demonstrate that the apparatus is capable of producing 87Rb condensates. Preliminary studies of 85Rb in the dipole trap are included which hopefully in future will lead to a quantum degenerate gas of 85Rb.