This thesis describes a new apparatus designed to study ultracold gases of rubidium. The apparatus comprises a six-beam MOT chamber and a dierential pumping stage leading into a 'science chamber'. This science chamber is constructed from a rectangular glass cell. Atomic gases of rubidium are collected in a MOT and then transferred into a magnetic quadrupole trap. This quadrupole trap is mounted on a motorised translation stage. This setup transports the atoms into the science chamber, where they are transferred into a static quadrupole trap which is built around the glass cell. During the transport the atoms are deected over a glass prism, which shields the science chamber from stray rubidium from the MOT chamber. The magnetic transport is studied in detail and the deection over the glass prism is fully described simulating the displacement of the quadrupole trap. Using the magnetic quadrupole trap in the science chamber to store one rubidium isotope, we are able to load the other rubidium isotope in the MOT chamber and transfer it also into the science chamber. There, the two magnetic traps are merged and variable ratios of isotopic mixtures can be created. The merging of the two quadrupole traps could be employed in future experiments to cool 85Rb sympathetically with 87Rb. In the science chamber forced radio-frequency evaporation is performed and the loading of a far-detuned dipole trap is studied. Initially the dipole trap is realised as a hybrid trap, a single beam dipole trap in combination with the quadrupole trap. Further studies include the loading of a crossed beam dipole trap. We demonstrate that the apparatus is capable of producing 87Rb condensates. Preliminary studies of 85Rb in the dipole trap are included which hopefully in future will lead to a quantum degenerate gas of 85Rb.
This thesis describes a new apparatus designed to study ultracold gases of rubidium. The apparatus comprises a six-beam MOT chamber and a dierential pumping stage leading into a 'science chamber'. This science chamber is constructed from a rectangular glass cell. Atomic gases of rubidium are collected in a MOT and then transferred into a magnetic quadrupole trap. This quadrupole trap is mounted on a motorised translation stage. This setup transports the atoms into the science chamber, where they are transferred into a static quadrupole trap which is built around the glass cell. During the transport the atoms are deected over a glass prism, which shields the science chamber from stray rubidium from the MOT chamber. The magnetic transport is studied in detail and the deection over the glass prism is fully described simulating the displacement of the quadrupole trap. Using the magnetic quadrupole trap in the science chamber to store one rubidium isotope, we are able to load the other rubidium isotope in the MOT chamber and transfer it also into the science chamber. There, the two magnetic traps are merged and variable ratios of isotopic mixtures can be created. The merging of the two quadrupole traps could be employed in future experiments to cool 85Rb sympathetically with 87Rb. In the science chamber forced radio-frequency evaporation is performed and the loading of a far-detuned dipole trap is studied. Initially the dipole trap is realised as a hybrid trap, a single beam dipole trap in combination with the quadrupole trap. Further studies include the loading of a crossed beam dipole trap. We demonstrate that the apparatus is capable of producing 87Rb condensates. Preliminary studies of 85Rb in the dipole trap are included which hopefully in future will lead to a quantum degenerate gas of 85Rb.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
In a Bose-Einstein Condensate (BEC), due to extremely low temperatures, wave functions of all particles in the system overlap and form a single macroscopic wavefunction. This brings quantum mechanical effects to the macroscopic scale and allows us to better understand known quantum mechanical laws and effects, as well as develop new ones. In addition to being of fundamental scientific interest, BEC can serve in practical applications, such as quantum metrology, atomic interferometry, and quantum information and communication. Here we describe our approach for producing BECs in 87Rb. To create atomic flux towards our science chamber, a 2-dimensional magneto-optical trap (2D-MOT) with push beam is used. The initial atomic cloud is formed in 15s by 3D-MOT and consists of 1e9 atoms at 500uK. After the MOT, atoms are cooled with optical molasses to 50uK and transferred to a quadrupole magnetic trap, where radio-frequency (RF) induced evaporation is performed, which lowers temperature to 10uK. After RF evaporation, the atomic cloud is transferred to a crossed beams optical dipole trap (ODT). During evaporation in the ODT, the temperature is reduced below the critical temperature Tc=286nK, where condensation starts, and eventually reaches 40nK. As a result, a quasi-pure BEC with 1e5 87Rb atoms is formed. The complete sequence from the MOT loading to the BEC formation takes about 30s. Observations of the inversion of the aspect ratio of the cloud during free expansion and a bimodal velocity distribution prove quantum degeneracy. Presented in this thesis are the necessary background for understanding the experimental steps, a description of the schemes and technical details of our setup, and a characterizations of all the experimental steps.
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
The aim of our experiment is to explore two methods of creating an ultracold dipolar gas which can subsequently be used to simulate quantum phenomena. The first method is to sympathetically cool polar molecules. In this case, the molecules are overlapped with ultracold lithium atoms, thus allowing the two clouds to thermalise through elastic collisions. The second method is to electrically polarise ultracold lithium atoms using an electric field of approximately 1MV/cm. This involves placing the atoms between two high voltage electrodes. This thesis describes and characterises the setup used to produce, trap and transport a cloud of lithium-7 atoms. The setup consists of a lithium oven, Zeeman slower, magneto-optical trap (MOT) and magnetic trap. Up to 2.3×10^8 atoms are loaded into the MOT with an initial temperature of 1.3 mK. By implementing a compressed MOT phase the temperature is reduced to 0.75 mK. Before transport, 23% of the MOT atoms are transferred into the magnetic trap, which has a lifetime of 1.53±0.01 s in the MOT chamber. Using a motorised translation stage to move the magnetic trapping coils, atomic transport over a distance of 44 cm from the MOT chamber to the science chamber has been demonstrated. The transport efficiency is 41%. In the science chamber the lifetime of the magnetic trap has been measured as 18.5±0.7 s. Experiments to optimise the absorption imaging system have also been carried out, highlighting the fact that a time and position dependent magnetic field is present after the trapping coils switch off. The feasibility of producing a 1MV/cm electric field has been investigated. By using indium tin oxide coated glass electrodes in an adjustable electrode mount, an electric field of approximately 0.2MV/cm has been generated. These electrodes were subsequently replaced with super-polished stainless steel electrodes which generated a field of 0.38MV/cm.