Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SPIE eBooks

Stimulated Brillouin Scattering

Peter Powers

Published Nov 15, 2013• 5 citations
Publisher

Abstract

Our experiment setup is shown schematically in Fig. S1. We use two tunable continuous-wave diode lasers operating at wavelengths near 1.55 μm, with output frequencies offset by 9.6 GHz. The output intensities are modulated using Mach-Zehnder modulators to create the write, read and data pulses. The modulators are driven by two independent outputs of a pulse-pattern generator. We cascade three Erbium-doped fiber amplifiers to increase the peak power of the write and read pulses. The fiber loop formed by two 3-dB couplers, a 1-km-long single-mode fiber (SMF28e) and a fiber polarization controller is used to remove the weak coherent background and amplified-spontaneous-emission noise. It is a nonlinear transmission element adjusted to pass with high efficiency the write and read pulses and reject the weak background. The write and read pulses enter a 5-m-long highly nonlinear optical fiber – the stored-light medium – where they counterpropagate with respect to the data pulses that enter the fiber via a circulator. The write and read pulses are ~1.5 ns long, have a nearly rectangular shape as shown in Fig. S2, and have a peak power of ~100 W. They leave the fiber via another circulator and are attenuated before reaching a fast photoreceiver. The data pulses leave the fiber

DOI
10.1117/3.1002081.ch64

Related papers

Storing light in optical fibers using sound waves

Zhaoming Zhu

Increasing traffic on the Internet demands faster optical transmission networks. Future high-speed communication networks may rely largely on all-optical components that are intrinsically faster than their electronic counterparts. To achieve such networks, however, one needs to overcome a number of obstacles that exist at levels from devices to systems. For example, the lack of all-optical memory for storing optical data remains a bottleneck in modern optical information networks.1 There has been substantial progress in addressing this problem using spatial-spectral holography in systems that operate at cryogenic temperatures2 or stored light based on electromagnetically induced transparency, where optical information is impressed upon internal degrees of freedom of an ensemble of atoms or ions.3 Both of these methods, however, are limited to operating at the resonance wavelength of the ions or atoms used. These limitations have recently been partially overcome using a dynamically controlled resonator in which a single optical pulse was stored for ∼100ps.4 We recently presented a different approach: a simple storedlight approach5 in which optical pulse information is transferred onto a slowly moving hypersonic wave (∼1/40,000 of the light speed) in an optical fiber and converted back at a later time through stimulated Brillouin scattering (SBS) as illustrated in Figure 1. In the storage process, optical data pulses (of carrier frequency ν0) interact with a counterpropagating short intense ‘write’ pulse (of carrier frequency ν0 + νB, where νB is the Brillouin frequency shift of the fiber). The optical data pulses become depleted as energy is shifted to a hypersonic wave in the fiber. In the retrieval process, a short intense ‘read’ pulse at the same frequency as the ‘write’ pulse depletes the acoustic wave and releases the data back to the original optical frequency, thereby generating a replica of the incident data pulses. This stored-light approach has advantages such as room-temperature Figure 1. Stimulated Brillouin scattering allows data storage in an optical fiber. In the storage process, (a) optical data pulses interact with a ‘write’ pulse . (b) The optical data pulses become depleted as the information shifts to an acoustic wave in the fiber. To retrieve the data, (c) a ‘read’ pulse depletes the acoustic wave, (d) generating a replica of the original data pulses.5

SPIE Newsroom•Jan 1, 2008•0 citations

Zero-broadening of the retrieved data-pulse based on stimulated Brillouin scattering light storage in an optical fiber

Yingchun Ding, Jun Si, Shi Zhao Shen

Optik•Dec 29, 2011•0 citations

Pulse compression effect based on stimulated Brillouin scattering light storage in an optical fiber

Yingchun Ding, Lei Bao, Jiaojiao Li

Optik•Apr 15, 2011•4 citations

Pulsed-pump phosphorus-doped fiber Raman amplifier around 1260 nm for applications in quantum non-linear optics

Eilon Poem, Artem Golenchenko, Omri Davidson +3 more

We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses with a repetition rate of 200 kHz and up to 1.75 kW peak power. The input seed pulses are of sub-mW peak-power and minimal duration of 0.25 ns, carved out of a continuous-wave laser with sub-MHz linewidth. We obtain linearly polarized output pulses with peak powers of up to 1.4 kW, corresponding to peak-power conversion efficiency of over 80%. An ultrahigh small signal gain of 90 dB is achieved, and the signal-to-noise ratio 3 dB below the saturation power is above 20 dB. No significant temporal and spectral broadening is observed for output pulses up to 400 W peak power, and broadening at higher powers can be reduced by phase modulation of the seed pulse. Thus, nearly-transform-limited pulses with peak power up to 1 kW are obtained. Finally, we demonstrate the generation of pulses with controllable frequency chirp, pulses with variable width, and double pulses. This amplifier is thus suitable for coherent control of narrow atomic resonances, especially for the fast and coherent excitation of rubidium atoms to Rydberg states. These abilities open the way towards several important applications in quantum non-linear optics.

arXiv:2007.09190•Optics Express•Sep 25, 2020•5 citations

Superluminal propagation through 500 m optical fiber via stimulated Brillouin scattering

Liang Zhang, Li Zhan, Minglei Qin +3 more

We have experimentally demonstrated superluminal propagation through a 500 m optical fiber using stimulated Brillouin scattering (SBS), which is the longest superluminal propagating distance reported so far, to the best of our knowledge. Brillouin-induced loss resonance for fast light generation of pump signals is achieved in a single frequency Brillouin lasing oscillator with a highly nonlinear fiber as the SBS medium. The single frequency operation is realized by embedding the saturable absorber fiber loop with an unpumped erbium-doped fiber. Consequently, signals with a pulse width of 710 ns experience a maximum advancement of 1330 ns. Furthermore, the effects of pulse width and the duty cycle of pump signals are also investigated.

Optics Letters•Sep 16, 2015•17 citations

Large delay tunable slow-light based on high-gain stimulated-Brillouin-scattering amplification in optical fibers

Liang Xing, Li Zhan, Yuxing Xia

Chinese Science Bulletin•Aug 17, 2009•2 citations
Our experiment setup is shown schematically in Fig. S1. We use two tunable continuous-wave diode lasers operating at wavelengths near 1.55 μm, with output frequencies offset by 9.6 GHz. The output intensities are modulated using Mach-Zehnder modulators to create the write, read and data pulses. The modulators are driven by two independent outputs of a pulse-pattern generator. We cascade three Erbium-doped fiber amplifiers to increase the peak power of the write and read pulses. The fiber loop formed by two 3-dB couplers, a 1-km-long single-mode fiber (SMF28e) and a fiber polarization controller is used to remove the weak coherent background and amplified-spontaneous-emission noise. It is a nonlinear transmission element adjusted to pass with high efficiency the write and read pulses and reject the weak background. The write and read pulses enter a 5-m-long highly nonlinear optical fiber – the stored-light medium – where they counterpropagate with respect to the data pulses that enter the fiber via a circulator. The write and read pulses are ~1.5 ns long, have a nearly rectangular shape as shown in Fig. S2, and have a peak power of ~100 W. They leave the fiber via another circulator and are attenuated before reaching a fast photoreceiver. The data pulses leave the fiber
Increasing traffic on the Internet demands faster optical transmission networks. Future high-speed communication networks may rely largely on all-optical components that are intrinsically faster than their electronic counterparts. To achieve such networks, however, one needs to overcome a number of obstacles that exist at levels from devices to systems. For example, the lack of all-optical memory for storing optical data remains a bottleneck in modern optical information networks.1 There has been substantial progress in addressing this problem using spatial-spectral holography in systems that operate at cryogenic temperatures2 or stored light based on electromagnetically induced transparency, where optical information is impressed upon internal degrees of freedom of an ensemble of atoms or ions.3 Both of these methods, however, are limited to operating at the resonance wavelength of the ions or atoms used. These limitations have recently been partially overcome using a dynamically controlled resonator in which a single optical pulse was stored for ∼100ps.4 We recently presented a different approach: a simple storedlight approach5 in which optical pulse information is transferred onto a slowly moving hypersonic wave (∼1/40,000 of the light speed) in an optical fiber and converted back at a later time through stimulated Brillouin scattering (SBS) as illustrated in Figure 1. In the storage process, optical data pulses (of carrier frequency ν0) interact with a counterpropagating short intense ‘write’ pulse (of carrier frequency ν0 + νB, where νB is the Brillouin frequency shift of the fiber). The optical data pulses become depleted as energy is shifted to a hypersonic wave in the fiber. In the retrieval process, a short intense ‘read’ pulse at the same frequency as the ‘write’ pulse depletes the acoustic wave and releases the data back to the original optical frequency, thereby generating a replica of the incident data pulses. This stored-light approach has advantages such as room-temperature Figure 1. Stimulated Brillouin scattering allows data storage in an optical fiber. In the storage process, (a) optical data pulses interact with a ‘write’ pulse . (b) The optical data pulses become depleted as the information shifts to an acoustic wave in the fiber. To retrieve the data, (c) a ‘read’ pulse depletes the acoustic wave, (d) generating a replica of the original data pulses.5
We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses with a repetition rate of 200 kHz and up to 1.75 kW peak power. The input seed pulses are of sub-mW peak-power and minimal duration of 0.25 ns, carved out of a continuous-wave laser with sub-MHz linewidth. We obtain linearly polarized output pulses with peak powers of up to 1.4 kW, corresponding to peak-power conversion efficiency of over 80%. An ultrahigh small signal gain of 90 dB is achieved, and the signal-to-noise ratio 3 dB below the saturation power is above 20 dB. No significant temporal and spectral broadening is observed for output pulses up to 400 W peak power, and broadening at higher powers can be reduced by phase modulation of the seed pulse. Thus, nearly-transform-limited pulses with peak power up to 1 kW are obtained. Finally, we demonstrate the generation of pulses with controllable frequency chirp, pulses with variable width, and double pulses. This amplifier is thus suitable for coherent control of narrow atomic resonances, especially for the fast and coherent excitation of rubidium atoms to Rydberg states. These abilities open the way towards several important applications in quantum non-linear optics.
We have experimentally demonstrated superluminal propagation through a 500 m optical fiber using stimulated Brillouin scattering (SBS), which is the longest superluminal propagating distance reported so far, to the best of our knowledge. Brillouin-induced loss resonance for fast light generation of pump signals is achieved in a single frequency Brillouin lasing oscillator with a highly nonlinear fiber as the SBS medium. The single frequency operation is realized by embedding the saturable absorber fiber loop with an unpumped erbium-doped fiber. Consequently, signals with a pulse width of 710 ns experience a maximum advancement of 1330 ns. Furthermore, the effects of pulse width and the duty cycle of pump signals are also investigated.