Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Compound Semiconductor Week (CSW)

Highly pure and stable single photon source directly coupled to a fiber

Satoru Odashima, Hirotaka Sasakura, H. Nakajima, H. Kumano

Published Jun 1, 2016• 0 citations
Publisher

Abstract

Highly pure and stable single photon source is established. Well-prepared pillar array which involve InAs QDs is directly contacted to a fiber end-surface, and cooled in a liquid He bath. Auto-correlation measurement shows that it works as a highly pure single photon source providing g(2)(0) <; 0.1 not only in the weak excitation case but also in the moderately strong excitation one. This photon source is quite rigid against the external disturbance such as cooling-heating cycle and vibration, with a long term stability. Such a pure and stable single photon source is quite promising to build up fiber-based quantum information technology to the actual stage.

DOI
10.1109/iciprm.2016.7528778

Related papers

Fiber-coupled pillar array as a highly pure and stable single-photon source

S. Odashima, H. Sasakura, H. Nakajima +1 more

A highly pure and stable single-photon source is prepared that comprises a well-designed pillar array, in which each pillar contains only a few InAs quantum dots. A nano-pillar in this array is in direct contact with a fiber end surface and cooled in a liquid-He bath. Auto-correlation measurements show that this source provides an average g(2)(0) value of 0.0174 in the measured excitation-power range. This photon source and fiber coupling are quite rigid against external disturbances such as cooling-heating cycles and vibration, with long-term stability.

arXiv:1707.03131•Journal of Applied Physics•Dec 11, 2017•7 citations

A stand-alone fiber-coupled single-photon source

Alexander Schlehahn, Sarah Fischbach, Ronny Schmidt +5 more

Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.

arXiv:1703.10536•Scientific Reports•Jan 16, 2018•99 citations

Fiber coupled high count-rate single-photon generated from InAs quantum dots

Yao Chen, Shulun Li, Xiangjun Shang +7 more

Abstract In this work, we achieve high count-rate single-photon output in single-mode (SM) optical fiber. Epitaxial and dilute InAs/GaAs quantum dots (QDs) are embedded in a GaAs/AlGaAs distributed Bragg reflector (DBR) with a micro-pillar cavity, so as to improve their light emission extraction in the vertical direction, thereby enhancing the optical SM fiber’s collection capability (numerical aperture: 0.13). By tuning the temperature precisely to make the quantum dot exciton emission resonant to the micro-pillar cavity mode (Q ~ 1800), we achieve a fiber-output single-photon count rate as high as 4.73 × 106 counts per second, with the second-order auto-correlation g 2(0) remaining at 0.08.

Journal of Semiconductors•Jul 1, 2021•6 citations

Narrow-Band Fiber-Coupled Single-Photon Source

Guilherme Stein, Vladislav Bushmakin, Yijun Wang +2 more

A single-photon source is an essential tool for the emerging field of quantum technologies. Ideally, it should be spectrally compatible with other photonic devices while providing a high flux of narrow-band photons. The single organic dye molecule dibenzanthanthrene under cryogenic conditions possesses the given characteristics and therefore constitutes a prominent single-photon source. Nevertheless, the implementation of such a single-photon source requires a complex experimental setup involving a cryostat with a confocal microscope for the effective collection of the molecular emission. In the approach presented here we use a single emitter coupled directly to the end facet of an optical fiber. This has the potential to transfer a single-photon source based on a quantum emitter from a proof-of-principle type of setup to a scalable ``plug-and-play'' device. We present successful coupling of a single organic molecule to an optical fiber and record the excitation spectrum, measure the saturation curve, and analyze the contributions of Raman background fluorescence. The single-photon nature is proven by an antibunched autocorrelation recording, which reveals coherent Rabi oscillations.

arXiv:1909.08353•Physical Review Applied•May 18, 2020•12 citations

Direct fiber-coupled single photon source based on a photonic crystal waveguide

Byeong-Hyeon Ahn, Chang-Min Lee, Hee‐Jin Lim +4 more

A single photon source plays a key role in quantum applications such as quantum computers and quantum communications. Epitaxially grown quantum dots are one of the promising platforms to implement a good single photon source. However, it is challenging to realize an efficient single photon source based on semiconductor materials due to their high refractive index. Here we demonstrate a direct fiber coupled single photon source with high collection efficiency by employing a photonic crystal (PhC) waveguide and a tapered micro-fiber. To confirm the single photon nature, the second-order correlation function g(2)(τ) is measured with a Hanbury Brown-Twiss setup. The measured g(2)(0) value is 0.15, and we can estimate 24% direct collection efficiency from a quantum dot to the fiber.

Applied Physics Letters•Aug 24, 2015•9 citations

1.3 μm on-demand single photon source for fibre systems

M. B. Ward, O. Z. Karimov, D. C. Unitt +6 more

We demonstrate the first on-demand single photon source at 1.3 m. The source is based on an InAs quantum dot embedded within a micro-pillar cavity structure. Correlation measurements demonstrate strong suppression of multi-photon emission.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•0 citations
Highly pure and stable single photon source is established. Well-prepared pillar array which involve InAs QDs is directly contacted to a fiber end-surface, and cooled in a liquid He bath. Auto-correlation measurement shows that it works as a highly pure single photon source providing g(2)(0) <; 0.1 not only in the weak excitation case but also in the moderately strong excitation one. This photon source is quite rigid against the external disturbance such as cooling-heating cycle and vibration, with a long term stability. Such a pure and stable single photon source is quite promising to build up fiber-based quantum information technology to the actual stage.
A highly pure and stable single-photon source is prepared that comprises a well-designed pillar array, in which each pillar contains only a few InAs quantum dots. A nano-pillar in this array is in direct contact with a fiber end surface and cooled in a liquid-He bath. Auto-correlation measurements show that this source provides an average g(2)(0) value of 0.0174 in the measured excitation-power range. This photon source and fiber coupling are quite rigid against external disturbances such as cooling-heating cycles and vibration, with long-term stability.
Abstract In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.
Abstract In this work, we achieve high count-rate single-photon output in single-mode (SM) optical fiber. Epitaxial and dilute InAs/GaAs quantum dots (QDs) are embedded in a GaAs/AlGaAs distributed Bragg reflector (DBR) with a micro-pillar cavity, so as to improve their light emission extraction in the vertical direction, thereby enhancing the optical SM fiber’s collection capability (numerical aperture: 0.13). By tuning the temperature precisely to make the quantum dot exciton emission resonant to the micro-pillar cavity mode (Q ~ 1800), we achieve a fiber-output single-photon count rate as high as 4.73 × 106 counts per second, with the second-order auto-correlation g 2(0) remaining at 0.08.
A single-photon source is an essential tool for the emerging field of quantum technologies. Ideally, it should be spectrally compatible with other photonic devices while providing a high flux of narrow-band photons. The single organic dye molecule dibenzanthanthrene under cryogenic conditions possesses the given characteristics and therefore constitutes a prominent single-photon source. Nevertheless, the implementation of such a single-photon source requires a complex experimental setup involving a cryostat with a confocal microscope for the effective collection of the molecular emission. In the approach presented here we use a single emitter coupled directly to the end facet of an optical fiber. This has the potential to transfer a single-photon source based on a quantum emitter from a proof-of-principle type of setup to a scalable ``plug-and-play'' device. We present successful coupling of a single organic molecule to an optical fiber and record the excitation spectrum, measure the saturation curve, and analyze the contributions of Raman background fluorescence. The single-photon nature is proven by an antibunched autocorrelation recording, which reveals coherent Rabi oscillations.
A single photon source plays a key role in quantum applications such as quantum computers and quantum communications. Epitaxially grown quantum dots are one of the promising platforms to implement a good single photon source. However, it is challenging to realize an efficient single photon source based on semiconductor materials due to their high refractive index. Here we demonstrate a direct fiber coupled single photon source with high collection efficiency by employing a photonic crystal (PhC) waveguide and a tapered micro-fiber. To confirm the single photon nature, the second-order correlation function g(2)(τ) is measured with a Hanbury Brown-Twiss setup. The measured g(2)(0) value is 0.15, and we can estimate 24% direct collection efficiency from a quantum dot to the fiber.